42

For instance, :echo strftime(%c) will show the current time on the bottom, but how to insert this time string to the text (right after the cursor)?

49

You can use the expression register, "=, with p (or P) in normal mode or <C-R> in insert mode:

In normal mode:
(<C-M> here means Control+M, or just press Enter/Return)

"=strftime('%c')<C-M>p

In insert mode:
(<C-M> has the same meaning as above, <C-R> means Control+R)

<C-R>=strftime('%c')<C-M>

If you want to insert the result of the same expression many times, then you might want to map them onto keys in your .vimrc:
(here the <C-M> and <C-R> should be typed literally (a sequence of five printable characters—Vim will translate them internally))

:nmap <F2> "=strftime('%c')<C-M>p
:imap <F2> <C-R>=strftime('%c')<C-M>
  • 2
    +1 Off course! The "= register. :-/ – Eelvex Feb 25 '11 at 7:42
  • 2
    to get the value of a vim variable (for example, sessionoptions): <C-R>=&sessionoptions -- it even does wildmode tab-completion! – Justin M. Keyes Oct 25 '12 at 18:22
  • 2
    :put =strftime('%c')<C-M> – brunch875 Aug 13 '15 at 19:23
  • In insert mode, using <c-r>= is slow for command which may have a lot of output and also may break indent so that the output text is unreadable. For example, <c-r>=execute('nmap'), the output will be written line by line, which is very slow. – jdhao Apr 24 at 8:51
23

:r!date +\%c

see :help :r!

  • 1
    date is an external command and ! calls external commands while OP asks for vim commands. – Eelvex Feb 25 '11 at 8:51
  • @eelvex no he didn't. and the ! is a vim, and vi, command. This is the canonical method. Works for many other things as well. – Keith Feb 25 '11 at 11:29
  • 5
    @Keith: yes ! is a vi(m) command that calls external commands. You may be right OP not wanting to output only vim commands but if (s)he does, ! will not do. – Eelvex Feb 25 '11 at 17:19
11

These commands will insert the output of strftime("%c") right where your cursor is:

:exe ":normal i" . strftime("%c")

and

:call feedkeys("i". strftime("%c"))

There are other ways to do what you want (like, for example, those on Mikel's answer).

Edit: Even better, for in-place insert, use the = register as Chris Johnsen describes

10

If you want to insert the output of a vim command (as opposed to the return value of a function call), you have to capture it. This is accomplished via the :redir command, which allows you to redirect vim's equivalent of standard output into a variable, file, register, or other target.

:redir is sort of painfully inconvenient to use; I would write a function to encapsulate its functionality in a more convenient way, something like

funct! Exec(command)
    redir =>output
    silent exec a:command
    redir END
    return output
endfunct!

Once you've declared such a function, you can use the expression register (as explained by Chris Johnsen) to insert the output of a command at the cursor position. So, from normal mode, hit i^R=Exec('ls') to insert the list of vim's current buffers.

Be aware that the command will execute in the function namespace, so if you use a global variable you will have to explicitly namespace it by prefixing it with g:. Also note that Exec(), as written above, will append a terminating newline to even one-line output. You might want to add a call to substitute() into the function to avoid this.

Also see https://stackoverflow.com/questions/2573021/vim-how-to-redirect-ex-command-output-into-current-buffer-or-file/2573054#2573054 for more blathering on about redir and a link to a related command.

  • 2
    This works great. I added a set paste command before returning the output and a set nopaste after, to avoid the staircase indent when the lines start with blanks. Actually, I wanted to save the value of the current paste option and to return it but I was unable to do it so. – Juan Lanus Jan 5 '15 at 21:17
  • 1
    @JuanLanus The set nopaste shouldn't work after return output, because the return statement is an exit point out of the function. I've put my solution to this problem as a separate answer on this page. – Evgeni Sergeev Apr 23 '15 at 4:57
4
:call append(line('.'), strftime("%c"))

Will put it on the next line, then you could press J (Shift+J)to join it up to the current position.

Or if you need it all in one command, you could do

:call setline(line('.'), getline(line('.')) . strftime("%c"))

or

:call setline(line('.'), getline(line('.')) . " " . strftime("%c"))

depending on whether you want a space inserted before the date or not.

4

Improving @intuited answer to avoid the problem with leading whitespace and growing indent:

"Examples:
":call Exec('buffers')
"This will include the output of :buffers into the current buffer.
"
"Also try:
":call Exec('ls')
":call Exec('autocmd')
"
funct! Exec(command)
    redir =>output
    silent exec a:command
    redir END
    let @o = output
    execute "put o"
    return ''
endfunct!

This will simply insert at the current location in the file when you :call Exec('command') from normal mode. As noted in the comment, the original (insert-mode) Ctrl+R =Exec('command') approach with Exec(..) returning a string could be partially corrected by using set paste, but doesn't offer an opportunity to put the set nopaste anywhere.

The let @o = output syntax sets the register o to the contents of the variable output, as explained here: https://stackoverflow.com/a/22738310/1143274

The return '' line is so that the default return value of 0 doesn't get inserted to the buffer.

2

This is how I do it. It puts it right after the cursor because it uses p.

" save previous yank
let reg_save = @@

" save your text to the '@' register
let @@ = strftime('%c')
" paste it after the cursor
exec "normal! p"

" restore previous yank
let @@ = reg_save

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.