0

My wireless adapter:

lsusb | rg -i  wireless
Bus 001 Device 005: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter

List my network interface:

iwconfig
lo        no wireless extensions.

enp6s0    no wireless extensions.

wlx38a28c80c24f  IEEE 802.11  Mode:Master  Tx-Power=20 dBm   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Power Management:off

Install hostapd and set up configuration:

sudo apt-get install hostapd
sudo vim  /etc/hostapd/hostapd.conf
interface=wlx38a28c80c24f
driver=nl80211
ssid=myap
hw_mode=g
channel=7
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wmm_enabled=1
ieee80211n=1
ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]
wpa=2
wpa_passphrase=linuxprobe
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP

Install dnsmasq and set up configuration:

sudo apt-get install dnsmasq
sudo vim /etc/dnsmasq.conf
resolv-file=/etc/resolv.dnsmasq.conf
server=/cn/114.114.114.114
server=/taobao.com/114.114.114.114
listen-address=127.0.0.1,192.168.11.1
dhcp-range=192.168.11.50,192.168.11.150,12h
dhcp-option=3,192.168.11.1
dhcp-option=6,192.168.11.1
cache-size=1024
conf-dir=/etc/dnsmasq.d

sudo vim /etc/resolv.dnsmasq.conf
nameserver 114.114.114.114

sudo vim /etc/resolv.conf
nameserver 127.0.0.1

Start the services:

sudo systemctl start dnsmasq.service
sudo systemctl start hostapd.service

Now connect myap with password linuxprobe,why the access point can't be accessed via my android phone?

1 Answer 1

0

Do the following command:

git clone https://github.com/oblique/create_ap.git
cd create_ap
sudo make install
ifconfig
    enp6s0
    wlx38a28c80c24f
sudo ifconfig wlx38a28c80c24f up 
wlan="wlx38a28c80c24f"
eth="enp6s0"
create_ap $wlan $eth MyAccessPoint MyPassPhrase
sudo systemctl start create_ap

Now i can connect the AP setting by create_ap from android phone.

1
  • Note that the create_ap Github repository is archived and that the author is suggesting using other similar projects.
    – Kusalananda
    Commented Dec 14, 2022 at 10:52

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .