I have a problem with my Ethernet interface. I think this problem occur after I replaced my bios because of password.
The problem is, when I turn on my laptop after shutdown my Ethernet interface dose not work. But after restart it always work.
I have these logs in dmesg file:
[ 2.208804] kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.253199] kernel: e1000e: probe of 0000:00:19.0 failed with error -3
And These are in journal logs when it fails:
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
And These are in journal logs when it succeeds:
e1000e 0000:00:19.0 enp0s25: renamed from eth0 e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) BC:12:34:56:78:9A e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock