I have two RasberryPi running debian wheezy and I would like to mount a folder from computer A on computer B.

What is the best (as in most efficient) way to do this?

I can do it via SMB, but that is for windows, I think there must be a better way to share across linux.


4 Answers 4


SSHFS is wonderful. It can mount remote directories in a local directory with FUSE. The commands below use # to indicate that a command was executed as root, while $ indicates execution as a regular user. Because FUSE software is required, first make sure that it is available and running.

One of the lsmod and grep commands, below, can reveal if the software is loaded and ready for use. A result from either command indicates that fuse is available.

# lsmod | grep fuse
$ grep -i fuse /lib/modules/$(uname -r)/modules.builtin

If there is no result from either command, try to load the kernel module without a reboot using modprobe and check again.

# modprobe fuse
# lsmod fuse

If loading the module fails, install the software with apt-get.

# apt-get install fuse

Check again after installation.

# modprobe fuse
# lsmod fuse

FUSE must be installed and running before continuing.

Check the permissions of /dev/fuse. The permissions should provide your regular user account with read and write access. Skip this part if you have determined that your regular user account already has read and write permission on /dev/fuse.

# ls -l /dev/fuse

The output might be something like one of the following.

crw-rw-rw- 1 root root (all users can read/write)
crw------- 1 root fuse (only root can read/write)
crw-rw---- 1 root fuse (root and members of fuse group can read/write)

In 2013, my Debian created /dev/fuse with 0600 permissions, owner root, group owner fuse. I needed to let the fuse group use the device and to add my regular user account to the group, as shown below.

# usermod -aG fuse $your_regular_user_account
# chmod 0660 /dev/fuse

If the new group membership was required, log out and in again to become a member of the group.

Next, install ssh on both sides as follows.

# apt-get install ssh

This answer was written for Debian, but on Ubuntu 18.x at least, openssh-client, fuse, and a few other packages are a part of the Ubuntu sshfs package. The sshfs software is required on the client side, but it can be installed on both sides if desired. One of the package dependencies is fuse, but the installer skips over software that has already been installed.

# Ubuntu 18.x: 
# apt-get install sshfs

With fuse and ssh available, and with permission to use the device, /dev/fuse, create a mount point for the remote file system; and, mount that remote filesystem locally as follows.

# mkdir /mnt/$directory_name
# chown $your_user:$group /mnt/$directory_name/
$ sshfs $remote_username@$remote_server_name: /mnt/$directory_name/

To mount a directory other than home, specify it after the colon.

$ sshfs $remote_username@$remote_server_name:/remote/directory /mnt/$directory_name

To unmount, use fusermount.

fusermount -u /mnt/$directory_name

If you have a Windows machine, it too can use SSHFS with win-sshfs. This software will "map a drive" with SSHFS, so that you can have a Windows drive letter that contains the remote directory.

  • 2
    You can significantly improve the performance speed of SSHFS by using additional options. See this article for more info and speed comparisons with NFS: admin-magazine.com/HPC/Articles/Sharing-Data-with-SSHFS
    – blendenzo
    Commented Jan 16, 2017 at 5:31
  • Hey -- I tried to use your instructions (adjusting to yum install fuse-sshfs.x86_64) but when I did modprobe fuse it didn't create a fuse group for me. So when I did usermod -a -G fuse [your-user], I got usermod: group 'fuse' does not exist. can you assist ? thanks in advance
    – amphibient
    Commented Nov 21, 2017 at 20:37
  • lsmod | grep fuse does return result and I do have /dev/fuse,m which is owned by root. so you're saying i'm okay without the group ?
    – amphibient
    Commented Nov 21, 2017 at 20:51
  • yes, I get crw-rw-rw-. 1 root root 10, 229 Nov 21 15:32 /dev/fuse
    – amphibient
    Commented Nov 21, 2017 at 21:00
  • After # apt-get install fuse-utils sshfs I get "Unable to locate package fuse-utils". Any idea why? (Ubuntu 18.04.01)
    – Kvothe
    Commented Oct 9, 2018 at 14:07

You can use plenty of things, among which, popular options are:

  • NFS
  • Samba / CIFS

By ease-of-setup I think they would have to be put in this order (top: easiest)


Through FUSE, you can mount remote filesystems via ssh. I won't cover how, as Cristopher has already very well explained that. Just note that, in order to mount the file automatically it will need a bit more of work.


It will allow you to use Windows and Unix machines to access the remote folder. If it's not a big deal for you, then you won't probably benefit from it. However, it's easy to automount it on init (just input the apropriate values at /etc/fstab, including username=<your-samba-username>,password=<your-samba-password> in the options column.


It will let you authenticate just via IP (no usernames thing = faster, only of use inside your non-hostile LAN) or via Kerberos Tickets (too painful for just two Raspberries; but useful in corporate environments).

As it has kernel mode support, it will run faster than sshfs. Besides, as there's no encryption performed it will have a better throughput, and in the case of the tiny Raspberry ARM, it may make a difference.

Besides, it's not so painful to setup simply you trust your network. You have automount support in /etc/fstab too, and you don't have to put sensitive data (such as usernames or passwords), and if you have your usernames syncrhronized (same /etc/passwd and /etc/group files) you can use the usual POSIX permissions toolset (chown, chgrp and chmod).

  • I use my Pi as an NFS server with a disks with mostly my movies and other media (ie not system-critical stuff, not '/home/' or anything similar). NFS allows me to watch a movie without first having to copy it to the local drive, but when writing files to the NFS disk I prefer to use rsync. I've therefore mounted my NFS disks readonly, and write stuff over SSH (with rsync). This also stops me from accidentally rsyncing to an NFS mounted disk (which is very inefficient).
    – zrajm
    Commented Feb 2, 2014 at 23:05
  • @zrajm how to you mount your disks on the pi?
    – FutuToad
    Commented Mar 7, 2014 at 16:30
  • arisu:/mnt/ytra /mnt/ytra nfs soft,ro,intr 0 2
    – zrajm
    Commented Mar 11, 2014 at 22:11
  • Samba may confuse some unix applications, notably around permissions or what stat() returns, e.g. things that rely on the nlink count which CIFS has no notion of. SSHFS I've been not much impressed with, as it ran context switches on the fileserver up mighty high, and did not support the necessary locking required by in-house programs. So, NFS...
    – thrig
    Commented Nov 5, 2015 at 21:25

In linux, you would choose for NFS (also check out the article on archwiki about it which may have applicable information for your distribution aswell). It has more advanced features then samba. If you need to lock (i.e. concurrent acces) files you should look into lockd aswell because nfs is stateless. However it is harder to configure than smb. I would suggest trying both samba and nfs to see which one suits your needs.


I have used both SFTP net drive and ExpanDrive in the past and I can tell you sshfs outperforms both without a question.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .