I know using the command
ls will list all the directories. But what does the
ls * command do ? I used it and it just lists the directories. Is the star in front of
ls means how deep it can list the directories?
ls lists the files and content of directories it is being passed as arguments, and if no argument is given, it lists the current directory. It can also be passed a number of options that affect its behaviour (see
man ls for details).
ls is being passed an argument called
*, it will look for a file or directory called
* in the current directory and list it just like any other.
ls doesn't treat the
* character in any other way than any other one.
ls * is a shell command line, then the shell will expand that
* according to the corresponding shell's globbing (also referred to as Filename Generation or Filename Expansion) rules.
While different shells support different globbing operators, most of them agree on the simplest one
* as a pattern means any number of characters, so
* as a
glob will expand to the list of files in the current directories that match that pattern. There's an exception however that a leading dot (
.) character in a file name has to be matched explicitly, so
* actually expands to the list of files and directories not starting with
. (in lexicographical order).
For instance, if the current directory contains the files called
* will be expanded by the shell to two arguments to pass to
foo bar, so it will be as if you had typed:
ls -l "foo bar"
'ls' "-l" foo\ bar
Which are three ways to run exactly the same command. In all 3 cases, the
ls command (which will probably be executed from
/bin/ls from a lookup of directories mentioned in
$PATH) will be passed those 3 arguments: "ls", "-l" and "foo bar".
Incidentally, in this case,
ls will treat the first (strictly speaking second) one as an option.
Now, as I said, different shells have different globbing operators. A few decades ago,
zsh introduced the
**/ operator¹ which means to match any level of subdirectories, short for
***/ which is the same except that it follows symlinks while descending the directories.
A few years ago (July 2003,
ksh93 decided to copy that behaviour but decided to make it optional, and only covered the
** case (not
***). Also, while
** alone was not special in
zsh (just meant the same as
* like in other traditional shells since
** means any number of character followed by any number of characters), in ksh93,
** meant the same as
**/* (so any file or directory below the current one (excluding hidden files).
ksh93 a few years later (February 2009, bash 4.0), with the same syntax but an unfortunate difference: bash's
** is like
***, that is it follows symlinks when recursing into sub-directories which is generally not what you want it do and can have nasty side effects (that has later been fixed in
** in version 2.0 in 2008, enabled with the
extended-glob option. Its implementation is closer to
zsh's in that
** alone is not special. In version 2.15 (2009), it added
*** like in
zsh and two of its own extensions:
.*** to include hidden dirs when recursing (in
D glob qualifier (as in
**/*(D)) will consider hidden files and directories, but if you only want to traverse hidden dirs but not expand hidden files, you need
The fish shell also supports
**. Like earlier version of
bash, it follows symlinks when descending the directory tree. In that shell however
**/* is not the same as
** is more an extension of
* that can span several directories. In
**/*.c will match
a/b/c.c but not
a**.c will match
**/.* for instance has to be written
.* **/.*. There,
*** is understood as
** followed by
* so the same as
tcsh also added a
globstar option in V6.17.01 (May 2010) and supports both
*** à la
ksh93, (when the corresponding option is enabled (
** expands all the files and directories below the current one, and
*** is the same as
fish, a symlink traversing
globstar, and the same as
ksh93 (though it's not impossible that future versions of those shells will also traverse symlinks).
Above, you'll have noticed the need to make sure none of the expansions is interpreted as an options. For that, you'd do:
ls -- *
There are some commands (it doesn't matter for
ls) where the second is preferable since even with the
-- some filenames may be treated specially. It's the case of
- for most text utilities,
pushd and filenames that contain the
= character for
awk for instance. Prepending
./ to all the arguments removes their special meaning (at least for the cases mentioned above).
It should also be noted that most shells have a number of options that affect the globbing behaviour (like whether dot files are ignored or not, the sorting order, what to do if there's no match...), see also the
$FIGNORE parameter in
Also, in every shell but
zsh, if the globbing pattern doesn't match any file, the pattern is passed as an unexpanded argument which causes confusion and possibly bugs. For instance, if there's no non-hidden file in the current directory
Will actually call
ls with the two arguments
*. And as there's no file at all, so none called
* either, you'll see an error message from ls (not the shell) like:
ls: cannot access *: No such file or directory, which has been known to make people think that it was
ls that was actually expanding the globs.
The problem is even worse in cases like:
rm -- *.[ab]
If there's no
*.b file in the current directory, then you might end up deleting a file called
*.[ab] by mistake (
zsh would report a no match error and wouldn't call
fish doesn't support the
If you do want to pass a literal
ls, you have to quote that
* character in some way as in
ls \* or
ls '*' or
ls "*". In POSIX-like shells, globbing can be disabled altogether using
set -o noglob or
set -f (the latter not working in
zsh unless in
(*/)# was always supported, it was first short-handed as
..../ in zsh-2.0 (and potentially before), then
****/ in 2.1 before getting its definitive form
**/ in 2.2 (early 1992)
ls defaults to
ls .: List all entries in the current directory.
ls * means 'run ls on the expansion of the
* shell pattern'
* pattern is processed by the shell, and expands to all entries in the current directory, except those that start with a
.. It will go one level deep.
The interpretation of double or triple
* patterns depend on the actual shell used.
* is a wildcard that matches 0 or more characters. Some modern shells will recurse into subdirectories on seeing the
You can demystify the whole process by typing
echo instead of
ls first, to see what the command expands to:
$ echo * Applications Downloads Documents tmp.html
So in this case,
ls * expands to
ls Applications Downloads Documents tmp.html
$ echo ** Applications Downloads Documents tmp.html $ echo *** Applications Downloads Documents tmp.html
So no change. This assumes you're using
bash as your shell -- most people are, and different shells have different behavior. If you're using
zsh, you may expect things to work differently. That's the point of having different shells.
So lets try something different (still with
bash) so we get an idea of the the globbing (
*) operator can do for us. For example, we can filter by part of the name:
$ echo D* Downloads Documents
And interestingly, a trailing slash is an implicitly part of any directory name. So
*/ will yield only the directories (and symbolic links to directories):
$ echo */ Applications/ Downloads/ Documents/
And we can do some filtering at multiple levels by putting slashes in the middle:
$ echo D*/*/ Documents/Work/ /Documents/unfinished/
Downloads directory doesn't contain any subdirectories, it does not end up in the output. This is very useful for just examining the files you want. I use commands like this all the time:
$ ls -l /home/*/public_html/wp-config.php
This lists, if there are any, all the
wp-config.php files that exist at the base level of any user's
public_html directory. Or perhaps to be more complete:
$ find /home/*/public_html/ -name wp-config.php
This will find any
wp-config.php files in any user's
public_html directories or any of their subdirectories, but it will operate more efficiently than just
find /home/ -name wp-config.php because it won't examine anything but the
public_html directories for each of the users.
In some shells, including bash 4.x with the
globstar option enabled,
** will perform a recursive glob, descending matched directories. Additional asterisks don't further modify this operation.
If you want to "dive deep", use ls -R (recursive) option, or use find, like so:
find . -ls
"find" will dive down to the bottom of the directory tree (as will 'ls -R'), and has many more options, like listing directories (-type d), files only (-type f) or showing files having other characteristics (no user in /etc/passwd, specific permissions, and a whole lot more). "find" is also somewhat safer in scripting (due to inconsistent globbing rules between shells, as well as special escapes for files having dashes, etc).
shell wildcard globbing won't work with just an asterisk '*' on dotfiles. To list dotfiles only, use:
Extra * doesn't add depth level. But if you try
- you will get list of subfolders of subfolders in folders in current folder...
My main grip is that echo **/*.ext will generally...
May or May not: list a .ext file in the current directory
May or May not: include .*.ext files
Generally I would prefer the glob expression to be '**/' and which can result in a null string (no sub-directory). This is how I convert glob expressions in program input. Of course I do insure there is comments explaining this in examples of use.