i'm using #Void_linux. Before i was using Ethernet. I've never used wireless before...

# ip link show

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp12s0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether d4:be:d9:71:98:bc brd ff:ff:ff:ff:ff:ff
3: wwp0s29u1u6i6: <BROADCAST,MULTICAST,NOARP,DYNAMIC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT
group default qlen 1000
    link/ether 06:0a:7e:d4:64:b6 brd ff:ff:ff:ff:ff:ff

so i created a config file here :

# touch /etc/wpa_supplicant/wpa_supplicant-wwp0s29u1u6i6.conf
# vi /etc/wpa_supplicant/wpa_supplicant-wwp0s29u1u6i6.conf
edition :
           1. ctrl_interface=/run/wpa_supplicant
           2. update_config=1
(save & exit)

and after done editing, i applied my wifi name and password into config file.

# wpa_passphrase <ssid> <pass> >> /etc/wpa_supplicant/wpa_supplicant-wwp0s29u1u6i6.conf
# vi /etc/wpa_supplicant/wpa_supplicant-wwp0s29u1u6i6.conf


Here last cmnd,

# wpa_supplicant -B -i wwp0s29u1u6i6 -c /etc/wpa_supplicant/wpa_supplicant-wwp0s29u1u6i6.conf

and after that i got all this Errors output :

Successfully initialized wpa_supplicant
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wwp0s29u1u6i6 disabled_11b_rates=0
wwp0s29u1u6i6: Failed to initialize driver interface

**Here i don't know what to do ? Please give me instruction,

Thank you :)


Try using wext driver

wpa_supplicant -B -i wwp0s29u1u6i6 -D wext -c /etc/wpa_supplicant/wpa_supplicant-wwp0s29u1u6i6.conf


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.