Recently I've installed Linux Mint Cinnamon alongside Windows 10 on my SSD. However, the other two drives I have are not properly recognized by Linux Mint.
One appears on the File System tree, but I can't access it, and the other doesn't even appear. When I try to use fdisk this is what I get:
sudo fdisk -l Disk /dev/sda: 931,5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0x49649181 Device Boot Start End Sectors Size Id Type /dev/sda1 63 1953523119 1953523057 931,5G 42 SFS Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 111,8 GiB, 120034123776 bytes, 234441648 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xfaf5a060 Device Boot Start End Sectors Size Id Type /dev/sdb1 * 2048 159942232 159940185 76,3G 7 HPFS/NTFS/exFAT /dev/sdb2 159942654 233478143 73535490 35,1G 5 Extended /dev/sdb3 233478144 234436607 958464 468M 27 Hidden NTFS WinRE /dev/sdb5 159942656 233478143 73535488 35,1G 83 Linux Partition table entries are not in disk order. Disk /dev/sdc: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 24A51F7E-9C3C-11E1-831D-705681C4DD72 Device Start End Sectors Size Type /dev/sdc1 34 2081 2048 1M Microsoft LDM metadata /dev/sdc2 2082 262177 260096 127M Microsoft reserved /dev/sdc3 262178 3907029134 3906766957 1,8T Microsoft LDM data
The sda is the one that shows up on the file system tree, and sdc is the one that does't.
When I use fdisk -l /dev/sda I get
sudo fdisk -l dev/sda fdisk: cannot open dev/sda: No such file or directory
I get this with either of the HDDs.
I have tried shutting off windows hibernating mode, have tried creating a partition on the sda using GParted, but the disk still does't show up.
This is the description I get from GParted for sdc
And this is the one for sda
But either way, I'd like to access the data there is on these HDDs using Linux, which I can using Windows.
I'm very new to Linux, and I'd like to have some help with this. Thank you.