I enabled xterm-keys in tmux in order to have normal xterm key bindings like whole-word movement using the Ctrl-arrow keys.

However, by enabling xterm-keys it causes Shift-Enter to have undesired effects in vim. In particular, pressing Shift-Enter in normal mode toggles the capitalization of 13 letters beginning from the cursor's position, irrespective of word boundaries. Pressing the keys in command mode escapes from that mode and then toggles the capitalization of 13 letters. Normally in vim, the results of this key press are to move down one line (normal mode) or to execute any entered commands (command mode), and as far as I know these are the default behaviors.

I've reproduced this effect with empty .tmux.conf and .vimrc files, so it's not a side effect of other configuration settings.

1 Answer 1


You are now using the F14½ key.

You have wandered into the world of Harry Potter, where there is a F14½ key between the F14 and Help keys on a DEC VT keyboard. VIM is not conversant with this world.

An LK401 keyboard

On a DEC VT keyboard, like the LK401 (for a DEC VT420) in the picture, the function keys from F1 to F20 generate input control sequences (DECFNK) numbered from 11 to 34. The extra DECFNK numbers correspond to physical gaps on the keyboard where there are not actually keys. It's quite logical once one realizes that. (There's a lot more on this in the further reading.) In particular, F14 generates a DECFNK 26 control sequence and Help generates a DECFNK 28 control sequence.

If one turns on the modifyOtherkeys option in XTerm, instead of generating the more usual input control sequences for a whole bunch of keypad keys, when modifiers are pressed XTerm generates a whole bunch of variations on DECFNK 27, the code for the gap between F14 and Help. The idea behind this is that a TUI program can differentiate amongst the various modified and unmodified uses of these keys, which it normally cannot do.

The Enter key, which conventionally generates ␍ as input except for when it generates ␊ when modified by ⎈ Control, in this mode instead generates DECFNK 27;2;13 when used in combination with ⇧ Shift and other DECFNK 27;M;13 sequences for other combinations of modifiers.

The xterm-keys option in tmux makes tmux understand all this. It recognizes these control sequences as input and sends them on as input to the terminals being multiplexed.

The problem is that very few Unix and Linux tools actually understand these control sequences properly. To handle terminal input properly one needs an ECMA-48 control sequence parser, that knows about intermediate characters, parameter characters, final characters, and so forth. But programs (including shells) using libraries like libedit, ZLE, and Readline; programs using ncurses; and programs like VIM do not have ECMA-48 control sequence parsers. (Again, there is more on this in further reading.) They do not handle the actual terminal protocol properly.

What they have instead are rather ad-hoc input handlers that do over-simplistic pattern matching. Which means that they cannot cope with DECFNK sequences in the form used by XTerm and tmux here.

DECFNK 27;2;13 spelled out in full is the character sequence CSI 2 7 ; 2 ; 1 3 ~. Using the 7-bit code extensions from ECMA-48 makes that ESC [ 2 7 ; 2 ; 1 3 ~. VIM does not properly decode this as an ECMA-48 control sequence, misunderstands the terminal input, and the 1 3 ~ characters at the tail of the control sequence end up having the effect that you see, of converting the capitalization of 13 characters.

Further reading

  • Thanks, you have a very detailed knowledge on this subject. It is interesting to learn that pressing 'Shift-Enter' with the xterm-keys option enabled ends up being interpreted by vim as 13~ (plus other silent inputs), just as I was observing.
    – user001
    Commented May 22, 2019 at 19:28

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .