I have such line when running
/dev/sda4 47G 45G 0 /
I have all those error messages that there is no space left on the device. I rebooted system and nothing changed. I also have free inodes (used about 30%). Drive SMART days tells that everything is OK.
What can be the cause? How to fix it? Deleting files doesn't increase the available space.
NAME FSTYPE LABEL UUID MOUNTPOINT sda ├─sda1 vfat EFI 67E3-17ED ├─sda2 ext4 data 05fb1d77-ca58-482c-be30-d1bc23a2e7d0 /home/enedil/data ├─sda3 hfsplus Linux HFS+ ESP 96a17c8a-ac44-30f3-b436-ff173b605c74 /boot/efi └─sda4 ext4 e0b1deed-2cf8-4967-a813-538affd72a75 /
These are outputs of command I was asked for:
This in turn is the of
smartctl -s on -a /dev/sda:
~ $ sudo smartctl -s on -a /dev/sda smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.20.15-100.fc28.x86_64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Apple SD/SM/TS...E/F/G SSDs Device Model: APPLE SSD SM0128G Serial Number: S23CNYAG426087 LU WWN Device Id: 5 002538 900000000 Firmware Version: BXW1JA0Q User Capacity: 121,332,826,112 bytes [121 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Mar 26 01:56:53 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x001a 200 200 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 12364 12 Power_Cycle_Count 0x0032 065 065 000 Old_age Always - 34430 169 Unknown_Apple_Attrib 0x0013 221 221 010 Pre-fail Always - 1052311028192 173 Wear_Leveling_Count 0x0032 183 183 100 Old_age Always - 1297113874815 174 Host_Reads_MiB 0x0022 099 099 000 Old_age Always - 24044320 175 Host_Writes_MiB 0x0022 099 099 000 Old_age Always - 15890436 192 Power-Off_Retract_Count 0x0012 099 099 000 Old_age Always - 537 194 Temperature_Celsius 0x0022 051 033 000 Old_age Always - 49 (Min/Max 5/67) 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.