I have a Unix-like OS installed without a windowing environment; i.e., just a text-mode console and no GUI.

Is it possible to change the font used by the console?

To be clear, I am not talking about the terminal emulator that comes with a desktop environment like KDE or GNOME.


If you use the Linux console, the best way I found is:



put, for example


Another way is to use setfont from the kbd package:

setfont /usr/share/consolefonts/Lat7-Terminus28x14.psf

This works for my Debian; it may be different for you.

In Debian, you can also run dpkg-reconfigure -plow console-setup to be prompted for the various console settings and pick them from menus.

Edit - I put together a small page how to setup the font colors. The section that is relevant for this post has the header "the Linux VTs" (= ttys, or "console").

| improve this answer | |
  • 10
    Font sizes listed by dpkg-configure console-setup are: 6x12, 8x14, 8x16, 10x20, 11x22, 12x24, 14x28, and 16x32. – Casey Watson Apr 8 '15 at 5:17
  • 1
    I had to reboot for this to take effect – mt025 Apr 5 '17 at 0:11
  • I used dpkg-reconfigure console-setup solution, and after i made my selections of font options, it modified /etc/default/console-setup and ran update-initramfs (i suppose with -u option). However, your answer does not mention running update-initramfs. Is it necessary? – Alexey Jul 28 '18 at 13:33
  • @mt025 you may use the command setupcon to apply the changes. It is part of the console-setup package. – Jangid Mar 3 at 6:22
  • 1
    On some distros (at least on Arch), the fonts will be in /usr/share/kbd/consolefonts. I will add a separate answer to highlight the setfont solution. – Leif Arne Storset Mar 5 at 12:23

If you want to use nearly any X-compatible font you should have a look at David Herrman's work on kmscon. The name slightly belies the project, actually, as Kernel Mode Setting is not a requirement for it to work - it also works with with frame-buffer devices - for instance if you are using proprietary AMD or nvidia display drivers. With kmscon you get multi-seat session management, xterm like keyboard and UTF-8 font handling and session control. Changing the font can be done via the /etc/kmscon/kmscon.conf or via a command-line option.

| improve this answer | |

/etc/default/console-setup et al. have been superseded on systemd operating systems, although you will find that some operating systems such as Debian try to maintain the older configuration system.

The way to do this on a systemd operating system is to edit the font settings in the /etc/vconsole.conf file. These settings are applied by the systemd-vconsole-setup service, which is essentially a glorified way of running setfont and loadkeys before the login services are brought up.

So you would have FONT=Uni2-Terminus28x14 in that file, for example.

Note that the service program allows kernel command-line options such as vconsole.font to override /etc/vconsole.conf contents. If you are mucking around with GRUB kernel command-line options, bear this in mind.

Further reading

| improve this answer | |
  • The problem with this approach is that it is systemd-specific and changes the default for all users. – fpmurphy Oct 18 '17 at 10:42

Using Ubuntu 16.04 (probably works in all supported versions), I edited ~/.bashrc and just before terminal splash at end of file, inserted the setfont command:

# Set font when running in console
/bin/setfont /usr/share/consolefonts/Lat2-Terminus32x16.psf.gz    

# Splash Calendar and time

# ASCII Linux distribution display

Now when selected Ctrl+Alt+F1 through Ctrl+Alt+F6 and get nice big fonts.

This is the largest font available and you can see a complete list with ls command:

$ ls /usr/share/consolefonts
Arabic-Fixed15.psf.gz             Lat15-Terminus20x10.psf.gz
Arabic-Fixed16.psf.gz             Lat15-Terminus22x11.psf.gz
Arabic-VGA14.psf.gz               Lat15-Terminus24x12.psf.gz
    (... SNIP ...)
Lat15-Terminus14.psf.gz           Vietnamese-Fixed16.psf.gz
Lat15-Terminus16.psf.gz           Vietnamese-Fixed18.psf.gz

Sample screen

This is a facsimile, not a true screen capture from console where screen is wider by 20% and background is black:

Sample console fonts

Prior to changes I couldn't read the screen on HDPI monitor.

| improve this answer | |

setfont worked for me. Choose a font; usually they are listed in one of these:

  • /usr/share/consolefonts
  • /usr/share/kbd/consolefonts

For example, to use the font /usr/share/kbd/consolefonts/ter-v32n.psf.gz, you can enter

setfont ter-v32n
| improve this answer | |

In Linux Mint 18.1 terminal:

  1. Right click anywhere in the black space.
  2. Choose "profiles", "profile preferences".
  3. Put a tic in "custom font" box.
  4. Click on the big text sample box next to it.
  5. Choose whatever font size and type you want.

The changes will appear immediately.

| improve this answer | |
  • 2
    I think the question is about Linux console (tty1 -- tty8). – Alexey Jul 11 '17 at 7:32
  • You saw the words without desktop @Never Too Old To Learn? – alamin May 3 '18 at 16:23

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.