I have two network interfaces: eth0, and p2p1. My default zone is set to public. I would like to permanently set p2p1 to be trusted.
In order the achieve this I run:
sudo firewall-cmd --permanent --change-zone=p2p1 --zone=trusted
after that I get this:
The interface is under control of NetworkManager, setting zone to 'trusted'. success
(I have netplan controlling my network.) To check if all is good I do:
sudo firewall-cmd --get-active-zones public interfaces: eth0 trusted interfaces: p2p1
But after a reboot it is all gone. How can I make this stick?
Update: I found this "To permanently assign the eth0 network interface to the internal zone (a file called internal.xml is created in the /etc/firewalld/zones directory... "
root@me:~# nmcli con show | grep p2p1 netplan-p2p1 44db1fb7-b83f-36aa-8dd1-faa6fb97f6c4 ethernet p2p1 p2p1 3ad65062-db85-4ba6-9104-76644e78a5c4 ethernet -- p2p1 c3297794-7641-4033-9f68-156f26ffe024 ethernet -- root@me:~# nmcli con mod "netplan-p2p1" connection.zone trusted root@me:~# nmcli con up "netplan-p2p1" Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/3)
... the above calls changed p2p1 to zone=trusted. But same problem -- it is not sticking.
I am on an Ubuntu 18.10 system, so adding a config file like suggested here will not work. Not sure, but I am assuming I need to add some script in "/etc/network/if-up.d" folder.
Update 2: netplan config file 01-netcfg.yaml
network: version: 2 renderer: NetworkManager ethernets: # WAN eth0: dhcp4: no dhcp6: no addresses: [184.108.40.206/29] gateway4: 220.127.116.11 nameservers: addresses: [18.104.22.168,22.214.171.124] # LAN p2p1: dhcp4: no dhcp6: no addresses: [192.168.1.99/24] gateway4: 192.168.1.100