0

I bought a dongle which are Realtek 8812AU and I'm sure that the dongle could work on monitor mode but after I connected it to my kali Linux on virtual machine and I trying to enabled monitor mode, some error happen. here is how I enabling monitor mode, I refer to the GitHub steps https://github.com/kimocoder/rtl8812au : $ airmon-ng check kill $ sudo ip link set wlan0 down $ sudo airmon-ng start wlan0 PHY Interface Driver Chipset phy0 wlan0 8812au Realtek Semiconductor Corp.RTL8812AU 802.11a/b/g/n/ac WLAN Adapter (monitor mode enabled) Error setting channel: command failed: Operation not supported (-95) phy1 wlan1 8812au Realtek Semiconductor Corp.RTL8812AU 802.11a/b/g/n/ac WLAN Adapter here is what I insert and what I get. For the wlan0 there are showing monitor mode are enabled but the error setting of command failed: Operation not supported (-95) make it unable to run monitor mode how can I solve this problem?

marked as duplicate by G-Man, Jeff Schaller, elbarna, Romeo Ninov, Rui F Ribeiro Dec 24 '18 at 6:12

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.