2

I connect my Linux laptop to an Onkyo P-3000R (a USB DAC) using a 10 meter USB cable. I would like to replace that long USB cable with a WiFi connection, if possible.

I could connect my Onkyo USB device to a WiFi router using a short cable. I could also possibly connect the USB device to a server on my LAN using USB over IP.

On my laptop I'm using PulseAudio and I manage my audio devices using Phonon on KDE.

My initial research turned up this Linux project: usbip

What are the steps required to use usbip to accomplish my goal?

closed as too broad by user88036, RalfFriedl, Jeff Schaller, maulinglawns, countermode Sep 25 '18 at 13:31

Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.

2

You need to install the usbip server on the computer the real USB device is connected to. If that is your Wifi router, you need to be root on the router, and you need to be able to install custom software (or have installed a firmware which provides the usual Linux software as packages, e.g. OpenWRT, DD-WRT etc. This is probably easier then messing with a rooted proprietary firmware.).

On the laptop, you need to install the usbip client. The Onkyo will than show up as USB device on the laptop, so it doesn't matter how you manage audio devices.

More detailed installation instructions shouldn't be hard to find with a bit of googling. If you get stuck, edit the question and describe what you've done and where you got stuck.

Another option is to install Pulseaudio on the Wifi-Router (again, that needs open firmware), configure it to use the Onkyo, and also configure one of the various Pulseaudio ways for remote audio access (RTP, RAOP, whatever; see Pulseaudio modules. In a similar way, configure Pulseaudio on your laptop. Then you'll have an additional "remote" sink on your Laptop, which you can use like a local sink.

  • I did not (yet) get usbip to work. But I did get PulseAudio remote to work – MountainX Sep 23 '18 at 22:53

Not the answer you're looking for? Browse other questions tagged or ask your own question.