-1
[martin@A08-R32-I196-2-FZ1RLP2 ~]$ sudo lshw -C display
  *-display UNCLAIMED     
       description: 3D controller
       product: NVIDIA Corporation
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:04:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress cap_list
       configuration: latency=0
       resources: iomemory:3a00-39ff iomemory:3a80-3a7f memory:92000000-92ffffff memory:3a000000000-3a7ffffffff memory:3a800000000-3a801ffffff
  *-display UNCLAIMED
       description: 3D controller
       product: NVIDIA Corporation
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress cap_list
       configuration: latency=0
       resources: iomemory:3b00-3aff iomemory:3b80-3b7f memory:91000000-91ffffff memory:3b000000000-3b7ffffffff memory:3b800000000-3b801ffffff
  *-display
       description: VGA compatible controller
       product: G200eR2
       vendor: Matrox Electronics Systems Ltd.
       physical id: 0
       bus info: pci@0000:09:00.0
       version: 01
       width: 32 bits
       clock: 33MHz
       capabilities: pm vga_controller bus_master cap_list rom
       configuration: driver=mgag200 latency=0 maxlatency=32 mingnt=16
       resources: irq:17 memory:90000000-90ffffff memory:93800000-93803fff memory:93000000-937fffff
  *-display UNCLAIMED
       description: 3D controller
       product: NVIDIA Corporation
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:83:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress cap_list
       configuration: latency=0
       resources: iomemory:3e00-3dff iomemory:3e80-3e7f memory:cd000000-cdffffff memory:3e000000000-3e7ffffffff memory:3e800000000-3e801ffffff
  *-display UNCLAIMED
       description: 3D controller
       product: NVIDIA Corporation
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:84:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress cap_list
       configuration: latency=0
       resources: iomemory:3f00-3eff iomemory:3f80-3f7f 

If yes, what's the model?

EDIT per suggestion:

[martin@A08-R32-I196-2-FZ1RLP2 anaconda3]$ lspci -vvv | head
00:00.0 Host bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 (rev 01)
        Subsystem: Intel Corporation Device 0000
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 0
        Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
0

It can be hit or miss with lshw whether you get meaningful product/vendor details. In your cases you're getting a mixed bag of results. The NVidia hardware is too generic, the Matrox seem pretty dead on as to what hardware version it is:

   product: NVIDIA Corporation
   vendor: NVIDIA Corporation

   product: G200eR2
   vendor: Matrox Electronics Systems Ltd.

I've had better luck with just using lspci for this instead:

$ lspci -vvv | head
...
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
        DeviceName:  Onboard IGD
        Subsystem: ASUSTeK Computer Inc. Skylake Integrated Graphics
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 128
        Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0800c  Data: 4142
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] #1b
        Capabilities: [200 v1] Address Translation Service (ATS)
                ATSCap: Invalidate Queue Depth: 00
                ATSCtl: Enable-, Smallest Translation Unit: 00
        Capabilities: [300 v1] #13
        Kernel driver in use: i915_bpo
        Kernel modules: i915_bpo

The key thing to do with `lspci`

AS you can see the above has much more detail about the video card.

  • please see my addition. It doesn't look like a GPU installed. right? – user697911 Aug 11 '18 at 2:50
  • @user697911 - was there no output regarding the video card when doing lspci -vvv? If that's truly all the output you received, there's no GPU listed. – slm Aug 11 '18 at 2:51
  • Yes. That's all I received. – user697911 Aug 11 '18 at 2:54
  • @user697911 - yeah so no GPU details. – slm Aug 11 '18 at 2:56
  • But these are our new machines and they are supposed to be GPU servers. Any other command to check? – user697911 Aug 11 '18 at 3:01
0

Please go to BIOS Settings to ensure that Dedicated GPU is enabled. If Dedicated GPU is disabled by mistake in BIOS. Commond lspci won't show GPU details.

Once sure that dedicated GPU is enabled do step as suggested by slm

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.