0

My command is ppp-ublox-on to activate GSM ppp0. After 25 minutes interval the PPP0 disconnect .and I need to run the command ppp-ublox -on again manually. I am using busy box. ppp-ublox-on script is as below

#!/bin/sh
#
# Script to initiate a ppp connection. This is the first part of the
# pair of scripts. This is not a secure pair of scripts as the codes
# are visible with the 'ps' command.  However, it is simple.

# These are the parameters. Change as needed.
APN=web2                # The APN for the connection
#APN=3GNET              # The APN for the connection
TELEPHONE=*99#          # The telephone number for the connection
ACCOUNT=                # The account name for logon (as in 'George Burns')
PASSWORD=               # The password for this account (and 'Gracie Allen')
LOCAL_IP=0.0.0.0        # Local IP address if known. Dynamic = 0.0.0.0
REMOTE_IP=0.0.0.0       # Remote IP address if desired. Normally 0.0.0.0
NETMASK=255.255.255.0   # The proper netmask if needed

# Save DNS Server IP
if [ ! -f /etc/dnsserver/dhclient.res.conf.ppp0 ]; then
        touch /etc/dnsserver/dhclient.res.conf.ppp0
fi
echo "nameserver 114.114.114.114" > /etc/dnsserver/dhclient.res.conf.ppp0
echo "nameserver 8.8.8.8" >> /etc/dnsserver/dhclient.res.conf.ppp0

# Save GATEWAY
if [ ! -f "/etc/gwserver/gateway.ppp0" ];then
        touch /etc/gwserver/gateway.ppp0
        chmod a+x /etc/gwserver/gateway.ppp0
fi
echo "route add default ppp0" > /etc/gwserver/gateway.ppp0

# Set DNS Server IP
if [ -f "/etc/dnsserver/dhclient.res.conf.ppp0" ];then
        cp /etc/dnsserver/dhclient.res.conf.ppp0 /etc/resolv.conf
fi

# Export them so that they will be available at 'ppp-on-dialer' time.
export APN TELEPHONE ACCOUNT PASSWORD

# This is the location of the script which dials the phone and logs
# in.  Please use the absolute file name as the $PATH variable is not
# used on the connect option.  (To do so on a 'root' account would be
# a security hole so don't ask.)

- /usr/sbin/ppp-ublox-on 1/57 1%

# This is the location of the script which dials the phone and logs
# in.  Please use the absolute file name as the $PATH variable is not
# used on the connect option.  (To do so on a 'root' account would be
# a security hole so don't ask.)

DIALER_SCRIPT=/etc/ppp/ppp-on-dialer

# Initiate the connection
#
# I put most of the common options on this command. Please, don't
# forget the 'lock' option or some programs such as mgetty will not
# work. The asyncmap and escape will permit the PPP link to work with
# a telnet or rlogin connection. You are welcome to make any changes
# as desired. Don't use the 'defaultroute' option if you currently
# have a default route to an ethernet gateway.
#
exec /usr/sbin/pppd debug lock modem crtscts /dev/ttyACM0 460800 \
        asyncmap 20A0000 escape FF kdebug 0 $LOCAL_IP:$REMOTE_IP \
        noipdefault netmask $NETMASK defaultroute connect $DIALER_SCRIPT
- /usr/sbin/ppp-ublox-on 57/57 100%
NETMASK=255.255.255.0   # The proper netmask if needed

ppp-on-dialer script is as below

and enter the APN as follow
#!/bin/sh
#
# This is part 2 of the ppp-on script. It will perform the connection
# protocol for the desired connection.
#
exec    chat -v                                         \
        TIMEOUT         3                               \
        ABORT           '\nBUSY\r'                      \
        ABORT           '\nNO ANSWER\r'                 \
        ABORT           '\nRINGING\r\n\r\nRINGING\r'    \
        ''              \rAT                            \
        'OK-+++\c-OK'   ATH0                            \
        TIMEOUT         30                              \
        OK              'AT+CGDCONT=1,"IP",'\"web2\"''  \
        OK              ATDT$TELEPHONE                  \
        CONNECT         ''
        ogin:--ogin: mobily
        assword:     awais

~ ~ ~ ~ ~ - /etc/ppp/ppp-on-dialer 1/18 5%

  • have you at?? – mikeserv Aug 5 '18 at 7:50
0

Make a file job1.sh

while true
do
    bash your-script.sh
    sleep 1500
done

**your-script is script you want to run every 25 minutes **

Now run job.sh in backgrounders

bash job1.sh &

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.