My problem:

I'm writing a bash script and in it I'd like to check if a given service is running.

I know how to do this manually, with $ service [service_name] status.

But (especially since the move to systemd) that prints a whole bunch of text that's a little messy to parse. I assumed there's a command made for scripts with simple output or a return value I can check.

But Googling around only yields a ton of "Oh, just ps aux | grep -v grep | grep [service_name]" results. That can't be the best practice, is it? What if another instance of that command is running, but not one started by the SysV init script?

Or should I just shut up and get my hands dirty with a little pgrep?

  • initd -> respawn | systemd -> Restart=always. Details in man pages.
    – schweik
    Feb 21, 2020 at 20:00

12 Answers 12


systemctl has an is-active subcommand for this:

systemctl is-active --quiet service

will exit with status zero if service is active, non-zero otherwise, making it ideal for scripts:

systemctl is-active --quiet service && echo Service is running

If you omit --quiet it will also output the current status to its standard output.

As pointed out by don_crissti, some units can be active even though nothing is running to provide the service: units marked as “RemainAfterExit” are considered active if they exit successfully, the idea being that they provide a service which doesn’t need a daemon (e.g. they configure some aspect of the system). Units involving daemons will however only be active if the daemon is still running.

  • 4
    Careful about oneshot services. They are only inactive or activating and both systemctl status and systemctl is-active exit with 3. (as of systemd-241) Workaround: systemctl show service | grep -qx ActiveStatus=activating Jul 16, 2019 at 19:51
  • @Alois I’m wondering what kind of scenarios you’ve encountered where you’d want to consider a oneshot service to be active; do you have an example? Jul 20, 2019 at 22:09
  • Sure, @StephenKitt. Tool foo does something to system involving reboot and uses a one-shot service, say, foo_cleanup at the next boot to clean things up. I'm testing this (my script is also scheduled as a service) and want to collect errors afterwards, but when is afterwards (vsauce music)? Well one of the criteria is that foo_cleanup has finished ("stopped being active"). Aug 4, 2019 at 16:18
  • 1
    It might be worth pointing out that 'is-failed' is also an option, and is useful if you need to perform an action based on a service not started. Sep 6, 2019 at 16:10
  • Note: for webmin the only working command is: service webmin status. systemctl won't work
    – Hardoman
    Aug 18, 2020 at 15:48

systemctl does have a mode suitable for scripting; use show rather than status, and add the -p / --properties and --value options to get only the output you want.

Here's an example (from an Ubuntu 17.04 system):

$ systemctl show -p SubState --value NetworkManager

Running (or otherwise) is a SubState. If you want to know whether a service is active, use the property ActiveState

$ systemctl show -p ActiveState --value x11-common
$ systemctl show -p SubState --value x11-common

Notes from the man:

show [PATTERN...|JOB...]
           Show properties of one or more units, jobs, or the manager
           itself. If no argument is specified, properties of the
           manager will be shown. If a unit name is specified, properties
           of the unit are shown, and if a job ID is specified,
           properties of the job are shown. By default, empty properties
           are suppressed. Use --all to show those too. To select specific
           properties to show, use --property=. This command is intended
           to be used whenever computer-parsable output is required. Use
           status if you are looking for formatted human-readable output.

-p, --property=
           When showing unit/job/manager properties with the show command,
           limit display to properties specified in the argument. The
           argument should be a comma-separated list of property names,
           such as "MainPID". Unless specified, all known properties are
           shown. If specified more than once, all properties with the
           specified names are shown. Shell completion is implemented for
           property names.

           When printing properties with show, only print the value, and
           skip the property name and "=".

To see available properties for a service, run (for example, for polkit)

systemctl show -a polkit

There are many properties, so if you know what you're looking for...

$ systemctl show - polkit | grep Active
ActiveEnterTimestamp=Thu 2020-07-02 07:24:40 IST
  • 3
    +1 for sophisticated answer . kindly specify the distros which will accept --version option with systemctl. Apr 26, 2018 at 11:31
  • 2
    On Raspbian I used a service which would break sometimes. Instead of "active (running)" its status would be "active (exited)". "systemctl is-active" would not differentiate. This answer gave me distinctions I needed: running / exited / dead
    – Pila
    May 31, 2020 at 18:25
  • 1
    Great answer, thank you. In my case I needed to care about portability (--value may not be available) and pattern matching, so I came up with a bash oneliner. e.g. to list the names of services matching apt* systemctl show --type service --property Names 'apt*' | while IFS= read -r line; do [[ $line ]] || continue; printf '%s\n' "${line#*=}"; done
    – m0dular
    Sep 10, 2021 at 17:50
  • 1
    It's very frustrating that the documentation which you site does not list all the states. For the states relevant to the "service" unit type, it refers to another documentation page, which simply does not discuss the possible substate values or their semantics :(
    – Otheus
    Feb 22 at 14:28
  • 1
    @Otheus I think the documentation issues are one of people's least favourite things about systemd :(
    – Zanna
    Feb 22 at 18:07

As a complement to Zanna's answer, the --value option for systemctl show has been introduced with version 230 of systemd. So it may not be available on certain distros like debian jessie.

In this case, one can emulate the option by using sed:

$ systemctl show -p ActiveState sshd | sed 's/ActiveState=//g'
$ systemctl show -p SubState sshd | sed 's/SubState=//g'  
  • 2
    +1 for pointed out the --value intro version & distro which will not work. Apr 26, 2018 at 11:29

I am too late to the party , however using systemctl is-active along with && and || to this in script wont be the case all the time. The below is one I used for tomcat but can use it in method taking arguments and pass service name as arguments if u have to check multiple services but its out of scope here.

STATUS="$(systemctl is-active tomcat.service)"
if [ "${STATUS}" = "active" ]; then
    echo "Execute your tasks ....."
    echo " Service not running.... so exiting "  
    exit 1  

This is how I made use of.... Just sharing mine.

and for the simplicity and easy stuffs, follow others explained here :

systemctl -q is-active tomcat.service  && \
echo "Tomcat Runnung" || \
echo "Service is not running at all "
  • 1
    How is that better than simply if systemctl is-active --quiet tomcat.service? Also, [[ isn't standard shell. Jun 13, 2019 at 17:55
  • @TobySpeight You need to read my post a bit more as I mentioned in my post "This is how I made use of.... Just sharing mine." I never said, its a standard shell usage, if u make it single bracket, it will become then but thats out of scope here. Moreover I below mention easy single line usage to do it using && and ||.
    – SAGAR Nair
    Jun 19, 2019 at 9:34

i find this useful for command line execution or if you are making scripts.

Copied from @StephenKitt

This will check if the service is down and perform service restart

systemctl is-active --quiet <service name> || <service name> restart

the || there checks if the return value from systemctl is non-zero meaning if it's not active as explained by the author.

  • 1
    You could also use `is-failed´ to test if a restart is needed. It seems a bit more intuitive for restarting a failed service. Sep 6, 2019 at 16:14
  • yes, but for me.. i wanted to practice myself and assume everything is running when it is not. so i can go things verify other stuffs with it. simply if you just want to check if it's not running, then 'is-failed' is a rightful choice. :)
    – asterisk
    Sep 8, 2019 at 2:02
  • I think Phil's point is that using is-active means that the script will restart the service even if it was stopped manually, which could cause some confusion. Jan 21, 2020 at 10:35
  • I put this into a cron job, and added logging: systemctl is-active --quiet <service name> || (echo '…' >> log.txt && systemctl restart <service name>).
    – Manngo
    Nov 27, 2020 at 1:46

this is for init.d system

if service is not running then start service:

service mysql status > /dev/null ||     service mysql start &
service ssh status > /dev/null ||     service ssh start &
service php7.4-fpm status > /dev/null ||     service php7.4-fpm start &
service redis-server status > /dev/null ||     service redis-server start &
service nginx status > /dev/null ||     service nginx start  &
service cron status > /dev/null ||     service cron start &

when a program exits it returns also an error id, a signed byte. on exit without problems, the value is usually 0. on exit because of errors, the value is usually error id or frequently -1.

this value is frequently used for command integration like the numeric status id of the printed program output.

to use it with command chaining the are two options && and ||

the || checks if the exit return value is not a zero, then it runes the chained command

instead of || it impossible to write &&

the && checks if the exit return value is a zero, then it runes the chained command

similar to @asterisk answer on this page (for systemd) https://unix.stackexchange.com/a/500336/156304

  • IS running: sudo service ssh status > /dev/null && echo "SSH running" .... or NOT running: sudo service ssh status > /dev/null || echo "SSH not running"
    – pds
    Aug 10, 2021 at 4:17

Instead of using the sed command like in the answer of Oxmel, it is enough to use cut -d'=' -f 2 for all kind of properties queried:

for example:

$ systemctl show -p ActiveState sshd | cut -d'=' -f2
$ systemctl show -p SubState sshd | cut -d'=' -f2
  • That's great but you really need to give some explanation as to what those commands do. Sep 6, 2019 at 16:12

There are many answers using systemctl.

You have other options as well (where $? comes handy):

  • Using pidof command: suppose I am trying to find if redis-server is running. First issue pidof redis-server and then check the value of $? You will find 0 if it was running; non-zero otherwise.
  • Service specific solution: If the service provides a way to check if the service is running, you may use that. For the redis-service example, if the service is running, we will get a PONG response for redis-cli ping command. After issuing redis-cli ping, I'd check $? and if it's 0 then the service is running.
  • 3
    systemctl seems better in general, but in Windows Subsystem for Linux (v1), that won't work. +1 for this, which works well enough for me in WSL. If you don't want to use $?, you could also put, e.g., pidof cron in the test directly or do cron_pid=$(pidof cron) and use it later. The output is an empty string if the service isn't running, so one can test for it like if [ -z $cron_pid ]; then dosomething; fi
    – Nathan
    Jan 25, 2020 at 15:00

Absolutely shameless plug since I'm the author, but I'd recommend checking out the service::linux task from the Puppet Service module. It's pure Bash and comes bundled with Bolt, so you don't actually need to use Puppet at all. e.g.

$ bolt task run service::linux action=status name=sshd --targets localhost

  "status": "MainPID=1358,LoadState=loaded,ActiveState=active",
  "enabled": "enabled"

The code uses systemctl show, which is here. It's been in use long enough that I feel confident in recommending it, and issues and PRs are welcome to be submitted.


Also works for a non-systemd OS.

What about ps -C service-name? check $? for answer. If 0 it's running, if 1, it's not running.


ps -C privoxy && echo running

The quiet version:

ps -C privoxy 1>/dev/null && echo running


I noticed that service-names longer than 14 characters can give a false positive.

Also, see comment by ''Nick S''.


Correctly shows running:

$ ps -C notification-daemon
  PID TTY          TIME CMD
 7418 ?        00:00:04 notification-da

Incorrectly shows running:

$ ps -C notification-daemon-fake
  PID TTY          TIME CMD
 7418 ?        00:00:04 notification-da

Correctly shows not running because less that 14 characters:

$ ps -C notification
  PID TTY          TIME CMD

I got this answer from here.

  • Good to know about the -C option to ps. But this will false positive if another instance of the command is running, but not as a service, as I mentioned in my question.
    – Nick S
    Feb 13, 2020 at 14:27
  • 3
    I didn't know that. I just tested it to verify and you are correct. So, this is not a good solution.
    – ajnabi
    Feb 21, 2020 at 19:19

You can use if/else in your bash script, as example for service service:

if (systemctl is-active --quiet service); then
        echo -e "SERVICE is Running!"
        echo -e "SERVICE has Stopped status!"
  • This is the answer I was looking for, it seems simple, robust, and it just works. Thanks! Apr 6 at 4:26

Have just found this great little script:


if (( $(ps -ef | grep -v grep | grep $service | wc -l) > 0 ))
  echo "$service is running!!!"
  /etc/init.d/$service start


  • 2
    Not all services have an executable of the same name, and any user could be running a command that accidentally matches - this is a recipe for disaster. Jun 13, 2019 at 17:54
  • It looks like you want to make the service restarted, if it dies. In the time of init the keyword was respawn in the /etc/inittab. Now, with systemd you have to configure the service in the /etc/systemd/system/multi-user.target.wants/mydaemon.service, by simply add a row with: Restart=always.
    – schweik
    Feb 21, 2020 at 19:56

Not the answer you're looking for? Browse other questions tagged or ask your own question.