I want to route all traffic from
computer_X over the vpn client except outgoing traffic
(I can also install a vpn-server on the client if that makes it easier).
Incoming connections, such as requests to my webserver :80 or :443 or ssh :22, will still be routed by default via my WAN interface, but outgoing connections, such as :80 requests from my
computer_X should be routed over the vpn client.
I added a rule to always use the WAN_GATEWAY as default route for packets that origin from my WAN_INTERFACE. See:
# ip route show table 42 default via WAN_GATEWAY dev eth0 # ip rule list 0: from all lookup local 32765: from WAN_IP lookup 42 32766: from all lookup main 32767: from all lookup default # ip r default via WAN_GATEWAY dev eth0 onlink 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 WAN_SUBNET/26 via WAN_GATEWAY dev eth0 WAN_SUBNET/26 dev eth0 proto kernel scope link src WAN_IP # ip a eth0: inet WAN_IP ... tun0: inet 10.8.0.1 peer 10.8.0.2/32 scope global tun0
Now I want to route all outgoing traffic over my tun0 device, but I can't just
ip route add default via 10.8.0.1, because you can't route a tunnel over itself?
But maybe I can still do a default route with
ip route default via 10.8.0.1
but additionally create a specific route for the vpn connections like so?
ip route add table 32 default via WAN_IP ip rule add from 10.8.0.0/8 table 32
I was hoping that this would prevent the vpn doesn't routing through itself.
Or do I have to add all routes for all subnets except 10.8.0.0/8 manually (to make sure that the tunnel is not tunneling itself)?
ip route add 188.8.131.52/1 via 10.8.0.1 ip route add 184.108.40.206/2 via 10.8.0.1 ip route add 220.127.116.11/3 via 10.8.0.1 ip route add 18.104.22.168/4 via 10.8.0.1 ip route add 22.214.171.124/6 via 10.8.0.1 ip route add 126.96.36.199/7 via 10.8.0.1 ip route add 188.8.131.52/8 via 10.8.0.1