1

I'm running Jessie/sid as my base.

When I type lspci:

00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0e)
00:13.0 SATA controller: Intel Corporation ValleyView 6-Port SATA AHCI Controller (rev 0e)
00:14.0 USB controller: Intel Corporation ValleyView USB xHCI Host Controller (rev 0e)
00:1a.0 Encryption controller: Intel Corporation ValleyView SEC (rev 0e)
00:1b.0 Audio device: Intel Corporation ValleyView High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e)
00:1c.2 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e)
00:1c.3 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e)
00:1f.0 ISA bridge: Intel Corporation ValleyView Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation ValleyView SMBus Controller (rev 0e)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

When I type lsusb:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. 
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 0c45:6513 Microdia 
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I can't figure out which device is the cdrom drive.

cat /proc/sys/dev/cdrom/info is empty of values.

There isn't even an eject button.

uname reads:

Linux DarthVader 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

Any ideas?

  • Which kernel version? – Jodka Lemon Dec 15 '15 at 21:29
  • Is it disabled in UEFI/ROM setup? – Jodka Lemon Dec 15 '15 at 22:08
  • It's not disabled in UEFI ROM. Secure boot is also disabled. The emulation is set to AHCI. – Frank Barcenas Dec 16 '15 at 3:45
1

Disregard, This version of the laptop I purchased does not come with a CDROM.

  • 1
    What a way to blow 50RP. – Frank Barcenas Dec 16 '15 at 4:33
  • How did you not notice this when you were running lspci and everything else? – cutrightjm Dec 16 '15 at 5:21
  • @ekaj My dvd drive does not show up in lspci or lsusb. I own a Thinkpad T420. With a drive. My question would be: How did you not see there IS NO DRIVE? – Jodka Lemon Dec 16 '15 at 9:56
  • 1
    They put a cover on the slot and make it look like it does. But there is no eject button. So you start thinking that its a software driven eject like macs. But no. It does not have a button on the slot because it doe snot have a drive. – Frank Barcenas Dec 16 '15 at 14:29

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.