1

I have been trying to clone my Debian /dev/sda1 partition containing /root with size of 100GB using Clonezilla. I did this by using Clonezilla-live to create iso file with size around 18 GB. It seems succesfully clone /root. My problem rises when I tried to restore it in virtualbox which I created with drive size of 110GB. The restore process shows the following:

Disk destinantion is too small!
Destination disk size: 230686720 sectors (118.1 GB)
Source disk size from the image: 976773168 sectors (500.1 GB)
Program terminated!!

It looks like Clonezilla only copies /root, but put the size of entire harddirsk instead of only 1 partition. Am I doing something wrong in creating iso file to restore 1 partition only? Or is it the limitation mentioned in Clonezilla website? As far as I understand, it states that The destination partition must be equal or larger than the source one not The destination disk.

  • unix.stackexchange.com/questions/73125/… Suppose you create in the VM a partition table containing the "size/filesystem type" properties as your current /dev/sda1 that you already have. Then you could copy in there the image_of_sda1.img of your /dev/sda that you created with dd if=/dev/sda1 of=./image_of_sda1.img". Be careful with if=` (input file) and of= (output file), since it may erase your disk if you do it the other way around. – Konstantinos Jun 23 '15 at 22:13
  • sounds like you did savedisk instead of saveparts. – meuh Jun 24 '15 at 6:05
  • @pidosaurus I haven't tried using dd to clone, but it seems interesting to try that since it doesn't require live boot like CloneZilla. @meuh I perfectly remember I chose saveparts because I repeatedly tried the cloning more than twice. – Franky Jun 25 '15 at 4:18
1

I happened to find the answer on serverfault in which we can modify image/sda-pt.parted in image folder produced by cloning before the iso file is made to overcome this problem. The sda-pt.parted file contains the following:

Model: ATA ST31000524AS (scsi)
Disk /dev/sda: 976562500s
...

where the value in the second line can be converted to the size of the cloned disk (though I only wanted to clone partition) by 976562500*512 = 5E11 (500GB). Let say the size of partition that is desired to be clone (or could be only the actual size of file in that partition) is 40GB, then that value on the second line can be altered into 4E10 / 512 = 78125000s, so the sda-pt.parted is going to be like this:

Model: ATA ST31000524AS (scsi)
Disk /dev/sda: 78125000s
...

As long as the new partition has equal size or larger to that value, then the cloning will work flawlessly.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.