0

I've hard disk failure on this pool. I replace the disk, I don't have any hard error and I can not to put back it online as nofified:

:~# zpool status data
  pool: data
 state: UNAVAIL
status: One or more devices could not be opened.  There are insufficient
        replicas for the pool to continue functioning.
action: Attach the missing device and online it using 'zpool online'.
   see: http://www.sun.com/msg/ZFS-8000-3C
 scan: none requested
config:

NAME                    STATE     READ WRITE CKSUM
data                    UNAVAIL      0     0     0  insufficient replicas
  raidz2-0              ONLINE       0     0     0
    c2t2d0              ONLINE       0     0     0
    c2t3d0              ONLINE       0     0     0
    c2t4d0              ONLINE       0     0     0
    c2t15d0             ONLINE       0     0     0
    c2t6d0              ONLINE       0     0     0
    c2t7d0              ONLINE       0     0     0
    c2t8d0              ONLINE       0     0     0
    c2t9d0              ONLINE       0     0     0
    c2t10d0             ONLINE       0     0     0
  14132293493917319721  UNAVAIL      0     0     0  was /dev/dsk/c2t11d0s0
  c2t12d0               ONLINE       0     0     0
  c2t13d0               ONLINE       0     0     0
  c2t14d0               ONLINE       0     0     0

I tried this command:

:~# zpool online -e  data  c2t5d0 
cannot open 'data': pool is unavailable

Why the zpool data still unavailable?

c2t0d0 and c2t1d0 are reserved for the system and are in z mirror. unavailable

And I would like to know what 's meaning this line:

14132293493917319721  UNAVAIL      0     0     0  was /dev/dsk/c2t11d0s0

because in my mind there's should be like this:

c2t11d0        UNAVAIL     0  0   0

Thanks.

3
  • Thks Marco, I used :~# zpool replace data c2t5d0 and I got this cannot open 'data': pool is unavailable – dubis Jun 3 '15 at 10:53
  • I believe you need to first remove it from the pool in order to replace it. – jas- Jun 3 '15 at 12:00
  • You have a severe problem: four of your disks (c2t11 through c2t14) are toplevel "stripe" disks. The loss of one disk means the loss of the entire pool, despite the fact that you've got a 9-way raidz2 in there. If you ever do recover your c2t11 disk, I highly recommend backing up the pool, recreating it from scratch with proper redundancy, and then restoring. – mmusante Jun 3 '15 at 13:50
2

You will need to remove from the pool prior to replacing. See the docs for a better explanation then I can provide: Replacing a Device in a ZFS Storage Pool | Oracle Help Center

2
  • 1
    c2t11d0 is a toplevel - it can't be removed, only replaced. The original disk needs to be found (or have the connector re-seated) before it can be replaced, because zfs needs something to copy the data from. – mmusante Jun 3 '15 at 13:51
  • I backup the data of pool and I restored it after replacing the damaged disk. I put 3 disks in the spare – dubis Mar 8 '17 at 8:24

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.