By the following way I convert a simple binary file into a text file

od –t x1 Check.tar | cut –c8- > Check.txt

Which gives a content similar to:

 64 65 76 2f 6e 75 6c 6c 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

What is the opposite way to convert the Check.txt to Check.tar as the original file

  • 1
    Maybe xxd -r -p Check.txt > Check.tar – cuonglm May 26 '15 at 9:13
  • its still text file , isnt work – maihabunash May 26 '15 at 9:17
  • What leads you to believe it's still a text file? xxd -r -p is the exact reverse of the od conversion you did; the output of cuonglm's command should be strictly identical to the original tarball. – Stephen Kitt May 26 '15 at 9:24
  • xxd -r -p Check.txt > Check.tar ..... file Check.tar Check.tar: ascii text – maihabunash May 26 '15 at 9:26
  • I also try this - tar xvf Check.tar tar: directory checksum error – maihabunash May 26 '15 at 9:28
od -An -vtx1 Check.tar > Check.txt

You need -v or od will condense sequences of identical bytes.

For the reverse:

LC_ALL=C tr -cd 0-9a-fA-F < Check.txt | xxd -r -p > Check.tar


perl -ape '$_=pack "(H2)*", @F' Check.txt > Check.tar

If your purpose is to transfer files over a channel that only supports ASCII text, then there are dedicated tools for that like uuencode:

tar cf - myfiles.* | xz | uuencode myfiles.tar.xz | that-channel 

And to recover those files on the other end:

uudecode < file.uu

would recreate myfiles.tar.xz.


uudecode -o - < file.uu | xz -d | tar xf -

To extract the files.

| improve this answer | |
  • first thanx for the answer , but I need to create file.tar file , how to do it? – maihabunash May 26 '15 at 10:12
  • @maihabunash If you created file.txt without -v and with removing the address, then you can't reliably recover file.tar if there were condensed sequences (do a grep '[*]' file.txt to check) as you've lost the information of how long those condensed sequences were by removing the address. – Stéphane Chazelas May 26 '15 at 10:22
  • hi , my target is to compress more then 30 perl script with tar or zip or whatever then convert it to text and then convert it back to compressed file , is it possible? ( I see tar is problem but can we do it with other options ) – maihabunash May 26 '15 at 10:31
  • or maybe there are more option for example to compress the 30 scripts but as ascii or text mode , I need that because when I copy from one machine to another machine from unclear reason the binary files are changes ( chksum ) and not ascii files – maihabunash May 26 '15 at 10:33
  • 1
    @maihabunash, you're looking for uuencode or base64 encoding. Note that my answer covers your question. I give the code to convert back to binary from od output provided you don't forget the -v option. If you're transferring files over FTP, don't forget to set the mode to "binary" (TYPE I FTP command, something like binary in your client) – Stéphane Chazelas May 26 '15 at 10:50

Answering the X part of this XY problem, I would recommend you investigate the reason your binary file transfers don't transfer properly.

If it turns out the reason is because you don't have an 8-bit clean datapath you could then use existing tools that were created to handle this situation, such as base64 or even uuencode. Old but still very effective.

tar czvf - /etc/h* | base64 >/tmp/tar.tgz.b64
ls -l /tmp/tar.tgz.b64
-rw-r--r-- 1 root root 7364 May 26 11:52 /tmp/tar.tgz.b64
base64 -d /tmp/tar.tgz.b64 | tar tzvf -


tar czvf - /etc/h* | uuencode - >/tmp/tar.tgz.uue
ls -l /tmp/tar.tgz.uue
-rw-r--r-- 1 root root 7530 May 26 11:51 /tmp/tar.tgz.uue
uudecode /tmp/tar.tgz.uue | tar xzvf -
| improve this answer | |
  • Upvote +1 for you thx – maihabunash May 26 '15 at 11:34
  • +1 for suggesting base64, which works on my relatively fresh cygwin install. – mwfearnley Nov 19 '15 at 9:18

In my case I didn't have xxd or uudecode on the remote device but I did have bash. I ended up with the following:

Convert from binary to txt with:

od -An -vtx1 myfile.bin > myfile.txt

Then convert back from txt to binary with:

while read p; do
    IFS=' ' read -r -a array <<< "$p" 
    for index in "${!array[@]}" 
        echo -en "\x${array[index]}" 
done < myfile.txt > myfile.bin
| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.