Reading "What is the difference between Halt and Shutdown commands?" , I generally have an idea what does the command shutdown does, with or without -h/-r options.

The "halt" command performs power off of the system to run-level 0 of the system.

The "shutdown" command performs a power off of the system to run-level 1 without -h or -r command.

What about the command "poweroff" does it goes into run-level 0 or 1 ? Is this the only main difference between these three commands?

  • Related askubuntu.com/q/578144/216503 – heemayl Apr 13 '15 at 13:36
  • This is some of the things that differ significantly for e.g. Solaris and FreeBSD. (There they usually (almost) immediately halt / shutdown the server, without changing runlevels to shut down stuff first) – Gert van den Berg Jan 4 '17 at 12:52
up vote 106 down vote accepted

And now, the systemd answer.

You're using, per the tag on your question, Red Hat Enterprise Linux. Since version 7, that has used systemd. None of the other answers are correct for the world of systemd; nor even are some of the assumptions in your question.

  • Forget about runlevels; they exist, but only as compatibility shims. The systemd documentation states that the concept is "obsolete". If you're starting to learn this stuff on a systemd operating system, don't start there.
  • Forget about the manual page that marcelm quoted; it's not from the right toolset at all, and is a description of another toolset's command, incorrect for systemd's. It's the one for the halt command from the van Smoorenburg "System 5" init utilities.
  • Ignore the statements that /sbin/halt is a symbolic link to /sbin/reboot; that's not true with systemd. There is no separate reboot program at all.
  • Ignore the statements that halt or reboot invoke a shutdown program with command-line arguments; they are also not true with systemd. There is no separate shutdown program at all.

Every system management toolset has its version of these utilities. systemd, upstart, nosh, van Smoorenburg init, and BSD init all have their own halt, poweroff, and so forth. On each their mechanics are slightly different. So are their manual pages.

In the systemd toolset halt,poweroff,reboot, telinit, and shutdown are all symbolic links to /bin/systemctl. They are all backwards compatibility shims, that are simply shorthands for invoking systemd's primary command-line interface: systemctl. They all map to (and in fact are) that same single program. (By convention, the shell tells it which name it has been invoked by.)

targets, not runlevels

Most of those commands are shorthands for telling systemd, using systemctl, to isolate a particular target. Isolation is explained in the systemctl manual page (q.v.), but can be, for the purposes of this answer, thought of as starting a target and stopping any others. The standard targets used in systemd are listed on the systemd.special(8) manual page.

The diagrams on the bootup(7) manual page in the systemd toolset, in particular the last one, show that there are three "final" targets that are relevant here:

  • halt.target — Once the system has reached the state of fully isolating this target, it will have called the reboot(RB_HALT_SYSTEM) system call. The kernel will have attempted to enter a ROM monitor program, or simply halted the CPU (using whatever mechanism is appropriate for doing so).
  • reboot.target — Once the system has reached the state of fully isolating this target, it will have called the reboot(RB_AUTOBOOT) system call (or the equivalent with the magic command line). The kernel will have attempted to trigger a reboot.
  • poweroff.target — Once the system has reached the state of fully isolating this target, it will have called the reboot(RB_POWER_OFF) system call. The kernel will have attempted to remove power from the system, if possible.

These are the things that you should be thinking about as the final system states, not run levels. Notice from the diagram that the systemd target system itself encodes things that are, in other systems, implicit rather than explicit: such as the notion that each of these final targets encompasses the shutdown.target target, so that one describes services that must be stopped before shutdown by having them conflict with the shutdown.target target.

systemctl tries to send requests to systemd-logind when the calling user is not the superuser. It also passes delayed shutdowns over to systemd-shutdownd. And some shorthands trigger wall notifications. Those complexities aside, which would make this answer several times longer, assuming that you are currently the superuser and not requesting a scheduled action:

  • systemctl isolate halt.target has the shorthands:
    • shutdown -H now
    • systemctl halt
    • plain unadorned halt
  • systemctl isolate reboot.target has the shorthands:
    • shutdown -r now
    • telinit 6
    • systemctl reboot
    • plain unadorned reboot
  • systemctl isolate poweroff.target has the shorthands:
    • shutdown -P now
    • telinit 0
    • shutdown now
    • systemctl poweroff
    • plain unadorned poweroff
  • systemctl isolate rescue.target has the shorthands:
    • telinit 1
    • systemctl rescue
  • systemctl isolate multi-user.target has the shorthands:
    • telinit 2
    • telinit 3
    • telinit 4
  • systemctl isolate graphical.target has the shorthand:
    • telinit 5

After parsing the various differing command-line syntaxes, these all eventually end up in the same code paths inside the systemctl program.

Notes:

  • The traditional behaviour of option-less shutdown now has been to switch to single-user mode. This is not the case with systemd. rescue.target — single-user mode being renamed rescue mode in systemd — is not reachable with the shutdown command.
  • telinit really does wholly ignore all of those runlevelN.target and default.target symbolic links in the filesystem that the manual pages describe. The aforegiven mappings are hardwired into the systemctl program, in a table.
  • systemd has no notion of a current run level. The operation of these commands is not conditional upon any "if you are in run-level N".
  • The --force option to the halt, reboot, and poweroff commands is the same as saying --force --force to the systemctl halt, systemctl reboot, and systemctl poweroff commands. This makes systemctl try to call reboot() directly. Normally it just tries to isolate targets.
  • telinit is not the same as init. They are different programs in the systemd world, the latter being another name for the systemd program, not for the systemctl program. The systemd program is not necessarily compiled with any van Smoorenburg compatibility at all, and on some systemd operating systems complains about being invoked incorrectly if one attempts init N.

Further reading

  • 1
    This is very much generic for most modern Linux systems so for instance answers wiert.me/2012/12/30/… After all these years wondering, I finally understand what's going on and why. – Jeroen Wiert Pluimers Sep 10 '16 at 15:17
  • systemctl reboot should be equivalent to systemctl start reboot.target --job-mode=replace-irreversible. Using any other job mode is less robust. unix.stackexchange.com/questions/381739/… – sourcejedi Aug 3 '17 at 14:47
  • I read your entire reponse, and absorbed what I could. One question remains, the same one i came here for, is systemctl reboot the "safe" way to reboot, e.g. init 6 which is the way we would otherwise safe reboot? – Brian Thomas Aug 17 at 21:19
  • halt instructs the hardware to stop all CPU functions, but leaves it in a powered-on state. This usually means someone has to reboot or shut the machine down manually by pressing the power button afterwards. The specific way to achieve this is architecture specific, but for instance the x86 instruction set provides the HLT instructions which halts the central processing unit (CPU) until the next external interrupt is fired.

  • poweroff, like halt, stops the CPU but also sends an ACPI hardware signal which will instruct the system to commence with a complete and immediate shutdown. This is roughly equivalent to pressing the power button on a typical desktop computer.

Both halt and poweroff are usually symbolic links to the reboot executable, which will usually invoke the shutdown tool with the appropriate arguments (-h, -P or r) depending on if halt, poweroff or reboot was used to invoke the tool. However, When the --force option is passed to reboot, or when in runlevel 0 or 6, reboot will invoke the reboot() system call with an appropriate command code itself.

  • Thomas, thank you very much for explaining. I am interested to know what about doing a #init 0, there is not much differences right? – Win.T Apr 13 '15 at 9:41
  • @Win.T Switching to runlevel 0 using e.g. /sbin/init 0 or /sbin/telinit 0 should be the same as halting the system, although the specific steps taken would depend on the init system in question, such as System-V init, upstart or systemd. If you're running RHEL, you would be using systemd. – Thomas Nyman Apr 13 '15 at 10:08
  • 3
    Note to self: every time someone complains about an arcane Win32 API call, show them reboot(2). – immibis Apr 13 '15 at 12:29
  • @immibis But reboot is purposely arcane. It requires the magic flags so that it is very difficult to do by accident. – Kevin Cox Apr 2 '16 at 15:12
  • 3
    @KevinCox That's the argument for requiring magic flags. It's not the argument for accepting 4 different values for magic2, nor for behaving differently inside a PID namespace, nor for lumping several barely-related operations (like setting reboot-on-Ctrl-Alt-Delete behaviour) into one function. – immibis Apr 2 '16 at 22:10

halt, poweroff and shutdown -h are completely equivalent. In fact, halt and poweroff do nothing but call shutdown -h. From the halt/poweroff manpage:

If halt or reboot is called when the system is not in runlevel 0 or 6, in other words when it's running normally, shutdown will be invoked instead (with the -h or -r flag). For more info see the shutdown(8) manpage.

Shutdown then proceeds to shut down the system by switching to runlevel 0.

Halt and poweroff (and reboot) perform a dual role; when executed in the process of shutting down (i.e., in runlevel 0 or 6), they perform the low-level operations required to physically stop, power off, or reboot the machine, as described in another answer.

  • 2
    Which version of RHEL are you using? There normally is a difference between halt and poweroff (although for a while it used not to be the case in many distributions, but that was a bug). – Bruno Apr 13 '15 at 17:37

Your Answer

 

By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service, privacy policy and cookie policy, and that your continued use of the website is subject to these policies.

Not the answer you're looking for? Browse other questions tagged or ask your own question.