0

I have tried to mount a SD card on Linux Mint, I have found the right device file and tried: mount -t vfat /dev/sdb /mnt/zauberportal ,but it failed and I tried some variations like different types of file systems after the -t option.

Now, I read, that it is quiet possible that it is because of a badly written partition table, the suggestion was to erase the whole partition table by filling the first 512 bytes of the SD card with zeros: dd if=/dev/zero of=/dev/sdb bs=512 count=1, than I should create a partitioning table using a program called gparted, but it did not work.

Is it possible to create a new partitioning table from the command line ?

closed as unclear what you're asking by jasonwryan, Braiam, Celada, Michael Homer, Anthon Feb 18 '15 at 6:25

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.

  • 2
    "It failed" and "it did not work" provide no useful information. Please read How To Ask Questions The Smart Way... – jasonwryan Feb 18 '15 at 0:54
  • Where did you get "the suggestion" from? Did that include making a backup of the SD? Any reason why to use gparted (I only use that for my drives > 2TB) – Anthon Feb 18 '15 at 6:25
4

If you want to possibly * remove everything then you can do your dd command; however, you'll still need to create a partition table.

NOTE I'm going to use /dev/sdb because that is what you have in your original question

I recommend fdisk. So you would do something like the following:

# fdisk /dev/sdb
Command (m for help): n
Select (default p): p
Partition number (1-4, default 1): 1
First sector (starting-ending, default starting): starting
Last sector, +sectors or +size{K,M,G} (starting-ending, default ending): ending
Command (m for help): w

You will then need to format the partition using mkfs. If you're only going to use your SD Card in a linux box then use ext3 or ext4:

# mkfs.ext3 /dev/sdb1

Otherwise, you're probably safer off with ntfs (check with what you're going to insert the card into):

# mkfs.ntfs /dev/sdb1

Once that's done, you can then mount it:

# mount -t ext3 /dev/sdb1 /mnt

When you're finished, make sure you unmount it:

# umount /mnt

*All of the data will still be there, but for most end users this means it's as good as gone without a partition table.

3

"fdisk" and "parted" are command line commands to deal with disk partition tables. You may try with them.

Not the answer you're looking for? Browse other questions tagged or ask your own question.