Problem I have a Linux machine (Slackware) with two network interface cards and i want to use one interface for network traffic and other for storage traffic . As this is Slackware i dont know this this could be the solution or not but i am trying this : ip route add IP1 dev eth0, ip route add IP2 dev eth1 For more reference please take a look at it
That is a bit complicated due to Linux being a "weak end system" design. Avoid it if you can.
Have a look at this question on Serverfault.
If the ARP problems are solved (the traffic from the SAN to
eth1) then all you still need should be a routing entry for the SAN:
# with then SAN address being 22.214.171.124 and the eth1 address 126.96.36.199 ip route add 188.8.131.52/32 dev eth1 src 184.108.40.206