4 added 325 characters in body
source | link

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

Edit 1

When I open /etc/sysconfig/network-scripts ifcfg-profile_1-1 I get this

TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME="Profile 1" UUID=d5d3e20c-6ef1-4e11-bf40-0cf5a7c6b463 ONBOOT=yes

Since PEERRDNS=yes what server information am I putting in the /etc/resolve.conf since mine is blank? Also in my network-scripts file I have ifcfg-lo and ifcfg-profile_1 and ifcfg-profile_1-1

Edit 2

When I type sudo dhclient p9p1 -v I get dhclient (2039) is already running -and exiting. this version of USC dhcp is based on the release available on FTP.isc.org. features have been added and other changes have been made to the base software release in order to make it work better with this distribution.

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

Edit 1

When I open /etc/sysconfig/network-scripts ifcfg-profile_1-1 I get this

TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME="Profile 1" UUID=d5d3e20c-6ef1-4e11-bf40-0cf5a7c6b463 ONBOOT=yes

Since PEERRDNS=yes what server information am I putting in the /etc/resolve.conf since mine is blank? Also in my network-scripts file I have ifcfg-lo and ifcfg-profile_1 and ifcfg-profile_1-1

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

Edit 1

When I open /etc/sysconfig/network-scripts ifcfg-profile_1-1 I get this

TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME="Profile 1" UUID=d5d3e20c-6ef1-4e11-bf40-0cf5a7c6b463 ONBOOT=yes

Since PEERRDNS=yes what server information am I putting in the /etc/resolve.conf since mine is blank? Also in my network-scripts file I have ifcfg-lo and ifcfg-profile_1 and ifcfg-profile_1-1

Edit 2

When I type sudo dhclient p9p1 -v I get dhclient (2039) is already running -and exiting. this version of USC dhcp is based on the release available on FTP.isc.org. features have been added and other changes have been made to the base software release in order to make it work better with this distribution.

3 added 566 characters in body
source | link

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

Edit 1

When I open /etc/sysconfig/network-scripts ifcfg-profile_1-1 I get this

TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME="Profile 1" UUID=d5d3e20c-6ef1-4e11-bf40-0cf5a7c6b463 ONBOOT=yes

Since PEERRDNS=yes what server information am I putting in the /etc/resolve.conf since mine is blank? Also in my network-scripts file I have ifcfg-lo and ifcfg-profile_1 and ifcfg-profile_1-1

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

Edit 1

When I open /etc/sysconfig/network-scripts ifcfg-profile_1-1 I get this

TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME="Profile 1" UUID=d5d3e20c-6ef1-4e11-bf40-0cf5a7c6b463 ONBOOT=yes

Since PEERRDNS=yes what server information am I putting in the /etc/resolve.conf since mine is blank? Also in my network-scripts file I have ifcfg-lo and ifcfg-profile_1 and ifcfg-profile_1-1

2 Formattting
source | link

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfigifconfig I get

lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 0 (Local Loopback) RX packets 150 bytes 12792 (12.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 150 bytes 12792 (12.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

p9p1: flags=4163 mtu 1500 inet6 fe80::96de:80ff:fe2d:8274 prefixlen 64 scopeid 0x20 ether 94:de:80:2d:82:74 txqueuelen 1000 (Ethernet) RX packets 85 bytes 11964 (11.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 94 overruns 0 carrier 0 collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstatnetstat I get  :

Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State
Active UNIX domain sockets (w/o servers)

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get

lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 0 (Local Loopback) RX packets 150 bytes 12792 (12.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 150 bytes 12792 (12.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

p9p1: flags=4163 mtu 1500 inet6 fe80::96de:80ff:fe2d:8274 prefixlen 64 scopeid 0x20 ether 94:de:80:2d:82:74 txqueuelen 1000 (Ethernet) RX packets 85 bytes 11964 (11.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 94 overruns 0 carrier 0 collisions 0

Also when I type netstat I get  

Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

I am brand new to linux and am unable to connect to the internet in Fedora 19. When I type ifconfig I get:

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 150  bytes 12792 (12.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 150  bytes 12792 (12.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p9p1: flags=4163  mtu 1500
        inet6 fe80::96de:80ff:fe2d:8274  prefixlen 64  scopeid 0x20
        ether 94:de:80:2d:82:74  txqueuelen 1000  (Ethernet)
        RX packets 85  bytes 11964 (11.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 94 overruns 0  carrier 0  collisions 0

Also when I type netstat I get:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
Active UNIX domain sockets (w/o servers)

I have tried to find what I can do to connect to the internet and I have been unsuccessful. I am using a wired connection through a router. I can ping 127.0.0.1 but cannot ping out.

1
source | link