Bumped by Community user
    Bumped by Community user
3 Formatted list.
source | link

I would like to have access from wan through ssh to my openwrt router. I did the following:

  • Go to the Network / Firewall / Traffic Rules.
  • Scroll down to the “Open ports on router” section.
  • Enter a name for this rule, e.g. “Allow-SSH-WAN”.
  • Set “Protocol” to “TCP”.
  • Enter “22” as the “External Port”.
  • Click “Add”.
  • Click “Save and Apply”.

Unfortunately ssh root@myWANip does not answer. WhereWhat did I miss?

I would like to have access from wan through ssh to my openwrt router. I did the following:

  • Go to the Network / Firewall / Traffic Rules.
  • Scroll down to the “Open ports on router” section.
  • Enter a name for this rule, e.g. “Allow-SSH-WAN”.
  • Set “Protocol” to “TCP”.
  • Enter “22” as the “External Port”.
  • Click “Add”.
  • Click “Save and Apply”.

Unfortunately ssh root@myWANip does not answer. Where did I miss?

I would like to have access from wan through ssh to my openwrt router. I did the following:

  • Go to the Network / Firewall / Traffic Rules.
  • Scroll down to the “Open ports on router” section.
  • Enter a name for this rule, e.g. “Allow-SSH-WAN”.
  • Set “Protocol” to “TCP”.
  • Enter “22” as the “External Port”.
  • Click “Add”.
  • Click “Save and Apply”.

Unfortunately ssh root@myWANip does not answer. What did I miss?

2 Formatted list.
source | link

iI would like to have access from wan through ssh to my openwrt router. iI did the following:

Go to the Network / Firewall / Traffic Rules.
Scroll down to the “Open ports on router” section.
Enter a name for this rule, e.g. “Allow-SSH-WAN”.
Set “Protocol” to “TCP”.
Enter “22” as the “External Port”.
Click “Add”.
Click “Save and Apply”.
  • Go to the Network / Firewall / Traffic Rules.
  • Scroll down to the “Open ports on router” section.
  • Enter a name for this rule, e.g. “Allow-SSH-WAN”.
  • Set “Protocol” to “TCP”.
  • Enter “22” as the “External Port”.
  • Click “Add”.
  • Click “Save and Apply”.

unfortunatelyUnfortunately ssh root@myWANip does not answer. any ideas, pleaseWhere did I miss?

i would like to have access from wan through ssh to my openwrt router. i did the following:

Go to the Network / Firewall / Traffic Rules.
Scroll down to the “Open ports on router” section.
Enter a name for this rule, e.g. “Allow-SSH-WAN”.
Set “Protocol” to “TCP”.
Enter “22” as the “External Port”.
Click “Add”.
Click “Save and Apply”.

unfortunately ssh root@myWANip does not answer. any ideas, please?

I would like to have access from wan through ssh to my openwrt router. I did the following:

  • Go to the Network / Firewall / Traffic Rules.
  • Scroll down to the “Open ports on router” section.
  • Enter a name for this rule, e.g. “Allow-SSH-WAN”.
  • Set “Protocol” to “TCP”.
  • Enter “22” as the “External Port”.
  • Click “Add”.
  • Click “Save and Apply”.

Unfortunately ssh root@myWANip does not answer. Where did I miss?

1
source | link

openwrt no ssh from wan

i would like to have access from wan through ssh to my openwrt router. i did the following:

Go to the Network / Firewall / Traffic Rules.
Scroll down to the “Open ports on router” section.
Enter a name for this rule, e.g. “Allow-SSH-WAN”.
Set “Protocol” to “TCP”.
Enter “22” as the “External Port”.
Click “Add”.
Click “Save and Apply”.

unfortunately ssh root@myWANip does not answer. any ideas, please?