4 deleted 108 characters in body
source | link

Before trying to use monitor mode:

>`wlx00223f942bc4  wlx00223f942bc4  IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j" --> wifi adapter 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=30 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=70/70  Signal level=-40 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:23   Missed beacon:0
---------------------------------------------------- 


wlp3s0    IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j"  -->home wifi
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=56/70  Signal level=-54 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:145   Missed beacon:0

Before trying to use monitor mode:

>`wlx00223f942bc4  IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j" --> wifi adapter 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=30 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=70/70  Signal level=-40 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:23   Missed beacon:0
----------------------------------------------------

wlp3s0    IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j"  -->home wifi
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=56/70  Signal level=-54 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:145   Missed beacon:0
  wlx00223f942bc4  IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j"
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=30 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=70/70  Signal level=-40 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:23   Missed beacon:0
 


wlp3s0    IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j"  -->home wifi
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=56/70  Signal level=-54 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:145   Missed beacon:0
3 mainly formatting
source | link

hei guys. imI'm new to kaliKali but I realy want to get into this so I tried some online-tutorials tutorials refering to aircrackaircrack-ng.

I am using 2 interfaces which are my wifi and a networkadapter  (itsit's connected to the same wifiWiFi than the first interface). However, everytime im using airmon-ng start [networkname]airmon-ng start [networkname] it keeps disconnecting my wifiWiFi. could that be because of an invalid networkcard? or maybe because of the managed mode?

`wlx00223f942bc4 IEEE 802.11bgn ESSID:"JIxx0Ovqee1j" --> wifi adapter Mode:Managed Frequency:2.462 GHz Access Point: 08:76:FF:CB:C4:21
Bit Rate=18 Mb/s Tx-Power=30 dBm
Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal level=-40 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0

Tx excessive retries:1 Invalid misc:23 Missed beacon:0

wlp3s0 IEEE 802.11bgn ESSID:"JIxx0Ovqee1j" -->home wifi Mode:Managed Frequency:2.462 GHz Access Point: 08:76:FF:CB:C4:21
Bit Rate=18 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=56/70 Signal level=-54 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:145 Missed beacon:0

>`wlx00223f942bc4  IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j" --> wifi adapter 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=30 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=70/70  Signal level=-40 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:23   Missed beacon:0
----------------------------------------------------

wlp3s0    IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j"  -->home wifi
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=56/70  Signal level=-54 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:145   Missed beacon:0

Problem: (Afterafter using monitor mode)

root@sney:/home/sney# airmon-ng start wlx00223f942bc4

Found 6 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to run 'airmon-ng check kill'

PID Name 768 NetworkManager 795 avahi-daemon 829 avahi-daemon 1000 wpa_supplicant 1236 dhclient 2225 dhclient

PHY Interface Driver Chipset

phy0 wlp3s0 iwlwifi Intel Corporation Centrino Wireless-N 2200 (rev c4) phy1 wlx00223f942bc4 carl9170 NetGear, Inc. WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101] Interface 15mon is too long for linux so it will be renamed to the old style (wlan#) name.

root@sney:/home/sney# airmon-ng start wlx00223f942bc4

Found 6 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to run 'airmon-ng check kill'

  PID Name
  768 NetworkManager
  795 avahi-daemon
  829 avahi-daemon
 1000 wpa_supplicant
 1236 dhclient
 2225 dhclient

PHY Interface Driver    Chipset

phy0  wlp3s0    iwlwifi   Intel Corporation Centrino Wireless-N 2200 (rev c4)
phy1  wlx00223f942bc4 carl9170  NetGear, Inc. WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]
Interface 15mon is too long for linux so it will be renamed to the old style (wlan#) name.

    (mac80211 monitor mode vif enabled on [phy1]wlan0mon
    (mac80211 station mode vif disabled for [phy1]wlx00223f942bc4)

somebody please help ):

hei guys. im new to kali but I realy want to get into this so I tried some online-tutorials refering to aircrack.

I am using 2 interfaces which are my wifi and a networkadapter(its connected to the same wifi than the first interface) However, everytime im using airmon-ng start [networkname] it keeps disconnecting my wifi. could that be because of an invalid networkcard? or maybe because of the managed mode?

`wlx00223f942bc4 IEEE 802.11bgn ESSID:"JIxx0Ovqee1j" --> wifi adapter Mode:Managed Frequency:2.462 GHz Access Point: 08:76:FF:CB:C4:21
Bit Rate=18 Mb/s Tx-Power=30 dBm
Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal level=-40 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0

Tx excessive retries:1 Invalid misc:23 Missed beacon:0

wlp3s0 IEEE 802.11bgn ESSID:"JIxx0Ovqee1j" -->home wifi Mode:Managed Frequency:2.462 GHz Access Point: 08:76:FF:CB:C4:21
Bit Rate=18 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=56/70 Signal level=-54 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:145 Missed beacon:0

Problem: (After using monitor mode)

root@sney:/home/sney# airmon-ng start wlx00223f942bc4

Found 6 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to run 'airmon-ng check kill'

PID Name 768 NetworkManager 795 avahi-daemon 829 avahi-daemon 1000 wpa_supplicant 1236 dhclient 2225 dhclient

PHY Interface Driver Chipset

phy0 wlp3s0 iwlwifi Intel Corporation Centrino Wireless-N 2200 (rev c4) phy1 wlx00223f942bc4 carl9170 NetGear, Inc. WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101] Interface 15mon is too long for linux so it will be renamed to the old style (wlan#) name.

    (mac80211 monitor mode vif enabled on [phy1]wlan0mon
    (mac80211 station mode vif disabled for [phy1]wlx00223f942bc4)

somebody please help ):

I'm new to Kali but I realy want to get into this so I tried some online tutorials refering to aircrack-ng.

I am using 2 interfaces which are my wifi and a networkadapter  (it's connected to the same WiFi than the first interface). However, everytime im using airmon-ng start [networkname] it keeps disconnecting my WiFi. could that be because of an invalid networkcard? or maybe because of the managed mode?

>`wlx00223f942bc4  IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j" --> wifi adapter 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=30 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=70/70  Signal level=-40 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:23   Missed beacon:0
----------------------------------------------------

wlp3s0    IEEE 802.11bgn  ESSID:"JIxx0Ovqee1j"  -->home wifi
          Mode:Managed  Frequency:2.462 GHz  Access Point: 08:76:FF:CB:C4:21   
          Bit Rate=18 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=56/70  Signal level=-54 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:145   Missed beacon:0

Problem (after using monitor mode):

root@sney:/home/sney# airmon-ng start wlx00223f942bc4

Found 6 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to run 'airmon-ng check kill'

  PID Name
  768 NetworkManager
  795 avahi-daemon
  829 avahi-daemon
 1000 wpa_supplicant
 1236 dhclient
 2225 dhclient

PHY Interface Driver    Chipset

phy0  wlp3s0    iwlwifi   Intel Corporation Centrino Wireless-N 2200 (rev c4)
phy1  wlx00223f942bc4 carl9170  NetGear, Inc. WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]
Interface 15mon is too long for linux so it will be renamed to the old style (wlan#) name.

    (mac80211 monitor mode vif enabled on [phy1]wlan0mon
    (mac80211 station mode vif disabled for [phy1]wlx00223f942bc4)
2 edited tags
| link
1
source | link