4 Improved readability
source | link

Use Ncat (http://nmap.org/ncat/). It is multiplatform, and it comes installed by default in many GNU/Linux distributions.

On your PC, listen with Ncat (port here we are using port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC><Your PC's IP> 55555

Then if you type something in your CuBox, it will be sent to your PC (type something and press enter to see how it works).

With bash, you could easily redirect your serial data received in the CuBox through the USB to nc. Example (i.e. usingusing screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

Use Ncat (http://nmap.org/ncat/). It is multiplatform, and it comes installed by default in many GNU/Linux distributions.

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC (type something and press enter to see how it works).

With bash, you could easily redirect your serial data received in the CuBox through the USB to nc (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

Use Ncat (http://nmap.org/ncat/). It is multiplatform, and it comes installed by default in many GNU/Linux distributions.

On your PC, listen with Ncat ( here we are using port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <Your PC's IP> 55555

Then if you type something in your CuBox, it will be sent to your PC (type something and press enter to see how it works).

With bash, you could easily redirect your serial data received in the CuBox through the USB to nc. Example (using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

3 deleted 153 characters in body
source | link

I can not tell you how to do it with your Windows PCUse Ncat (not because I do not want to, it is just that I do not know howhttp://nmap.org/ncat/).

Anyway It is multiplatform, if you had another Linuxand it comes installed by default in your PC, then you could try this (just search on the internet if there is a similar command for Windows or install a Linux based system on your PC! :-P):many GNU/Linux distributions.

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC (type something and press enter to see how it works).

With bash, you could easily redirect your serial data received in the CuBox through the USB to the nc connection (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

I can not tell you how to do it with your Windows PC (not because I do not want to, it is just that I do not know how).

Anyway, if you had another Linux in your PC, then you could try this (just search on the internet if there is a similar command for Windows or install a Linux based system on your PC! :-P):

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC.

With bash, you could easily redirect your serial data received in the CuBox through the USB to the nc connection (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

Use Ncat (http://nmap.org/ncat/). It is multiplatform, and it comes installed by default in many GNU/Linux distributions.

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC (type something and press enter to see how it works).

With bash, you could easily redirect your serial data received in the CuBox through the USB to nc (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

2 Fixed bad English.
source | link

I can not tell you how to do it with your Windows PC (not because I do not want to, it is just that I do not know how).

Anyway, if you had another Linux in your PC, then you could try this (just search on the internet if there is a similar command for Windows or install a Linux based system on your PC! :-P):

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC.

With bash, you could easily redirect your serial data receivedinreceived in the CuBox through the USB to the nc connection (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 bywith your PC's IP.

I can not tell you how to do it with your Windows PC (not because I do not want to, it is just that I do not know how).

Anyway, if you had another Linux in your PC, then you could try this (just search on the internet if there is a similar command for Windows or install a Linux based system on your PC! :-P):

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC.

With bash, you could easily redirect your serial data receivedin the CuBox through the USB to the nc connection (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 by your PC's IP.

I can not tell you how to do it with your Windows PC (not because I do not want to, it is just that I do not know how).

Anyway, if you had another Linux in your PC, then you could try this (just search on the internet if there is a similar command for Windows or install a Linux based system on your PC! :-P):

On your PC, listen with Ncat (port 55555, but you can use any port):

nc -l 55555

On your CuBox, connect to the listener:

nc <ipofyourPC> 55555

Then if you type something in your CuBox, it will be sent to your PC.

With bash, you could easily redirect your serial data received in the CuBox through the USB to the nc connection (i.e. using screen for reading serial data from the terminal):

screen /dev/ttyUSB0 | nc 192.168.1.20 55555

Notice you should change your tty device and substitute 192.168.1.20 with your PC's IP.

1
source | link