To get a complete picture you need to look at the number of threads per core, cores per socket and sockets. If you multiply these numbers you will get the number of CPUs on your system.
CPUs = Threads per core X cores per socket X sockets
CPUs are what you see when you run htop (these do not equate to physical CPUs).
Here is an example from a desktop machine:
$ lscpu | grep -E '^Thread|^Core|^Socket|^CPU\('
CPU(s): 8
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
And a server:
$ lscpu | grep -E '^Thread|^Core|^Socket|^CPU\('
CPU(s): 32
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
The output of nproc corresponds to the CPU count from lscpu. For the desktop machine above this should match the 8 CPU(s) reported by lscpu:
$ nproc --all
8
The output of /proc/cpuinfo should match this information, for example on the desktop system above we can see there are 8 processors (CPUs) and 4 cores (core id 0-3):
$ grep -E 'processor|core id' /proc/cpuinfo
processor : 0
core id : 0
processor : 1
core id : 0
processor : 2
core id : 1
processor : 3
core id : 1
processor : 4
core id : 2
processor : 5
core id : 2
processor : 6
core id : 3
processor : 7
core id : 3
The cpu cores reported by /proc/cpuinfo corresponds to the Core(s) per socket reported by lscpu. For the desktop machine above this should match the 4 Core(s) per socket reported by lscpu:
$ grep -m 1 'cpu cores' /proc/cpuinfo
cpu cores : 4
To specifically answer your question you tell how many cores you have by multiplying the number of cores you have per socket by the number of sockets you have.
Cores = Cores per socket X Sockets
For the example systems above the desktop has 4 cores:
$ echo "Cores = $(( $(lscpu | awk '/^Socket\(s\)/{ print $2 }') * $(lscpu | awk '/^Core\(s\) per socket/{ print $4 }') ))"
Cores = 4
While the server has 16:
$ echo "Cores = $(( $(lscpu | awk '/^Socket\(s\)/{ print $2 }') * $(lscpu | awk '/^Core\(s\) per socket/{ print $4 }') ))"
Cores = 16
Another useful utility is dmidecode which outputs per socket information. In the case of the server system listed above we expect to see 8 cores per socket and 16 threads per socket:
$ sudo dmidecode -t 4 | grep -E 'Socket Designation|Count'
Socket Designation: CPU1
Core Count: 8
Thread Count: 16
Socket Designation: CPU2
Core Count: 8
Thread Count: 16
The lscpu command has a number of useful options that you may like to check out, for example:
$ lscpu --all --extended
$ lscpu --all --parse=CPU,SOCKET,CORE | grep -v '^#'
See man lscpu for details.
In summary:
- You need to be aware of sockets, cores and threads
- You need to be careful of the term CPU as it means different things in different contexts
processor, notprecessor, correct? . Thanks for the help!