1
vote
1answer
5 views

How to merge config files interactively after “yum update”

After system packages are updated with "yum update", config files which could not be overwritten are not replaced, but we can find *.rpmnew files near by. By design system administrator must merge ...
1
vote
0answers
11 views

Yum or Reposync: How can I slowly remove a repository without unintended dependency issues?

I have used reposync to create and maintain local copies of two repositories, remi and remi-test. These are repositories maintained by Remi Collet. On several systems in an internal LAN, I added both ...
2
votes
1answer
48 views

yum: RPM dependency tree

I'm going to install an RPM package and I can see that some of dependencies requires X server libraries to be installed as well. I'm absolutely sure that the package I need is a server software and ...
1
vote
3answers
25 views

Other than via configuration in /etc/yum.repos.d, where else can a repository be configured?

Helping out someone who inherited his environment. He wants to disable some repositories. This is an anonymized output of his yum repolist: luke@server1 $ sudo yum repolist Loaded plugins: rhnplugin, ...
0
votes
0answers
39 views

bash script to verify rhel patching

we have several redhat servers which we patch from redhat satellite. To avoid confusion, I'll use the term "host" to denote the server which is being patched. We have a script, say, patch.sh, which ...
0
votes
2answers
68 views

Yum file conflicts due to my mistake. How do I fix?

I did something stupid. I simply scped my rpmforge repo files from another (working) machine on to my dev box, and ran yum update. This yielded: root@dev07 /etc/yum.repos.d # yum update Loaded ...
2
votes
3answers
49 views

listing package dependents

I stupidly did "yum remove python" which also ended up removing all the packages that required python as well. Luckily, I have access to another Linux machine that is a near clone of this machine, ...
0
votes
0answers
67 views

Creating yum .repo file from a remote repo using rpm

This command (from the install page for Varnish 3.x): rpm --nosignature -i http://repo.varnish-cache.org/redhat/varnish-3.0/el6/noarch/varnish-release/varnish-release-3.0-1.el6.noarch.rpm appears ...
0
votes
1answer
48 views

Building rtmpdump on RHEL x86 without yum and no root rights

I have an ssh connection to a RHEL x86 machine, and I can't use yum and I don't have root rights. Is there a way to still install rtmpdump? By looking at this tutorial, it seems that installing ...
1
vote
1answer
179 views

git 1.9 and yum groupinstall “Development Tools”

I was reading that installing unofficial repositories in RedHat was not a good idea. So I was trying to install NodeJS on the RH Server and I saw that the git version was 1.7.1. Our team is using 1.9 ...
0
votes
1answer
2k views

yum install PHP Error Summary

so I'm following this tutorial to install php5 in a red hat 6.5 box and I have only type one command and is this one below, I just wantend to install the php-gd module.(testing..) when I try this: ...
0
votes
1answer
269 views

How to install mysql-server 5.6 on RHEL 5.8 (when MySQL-server 5.0 is already installed)

I want to install mysql-server 5.6 on RHEL 5.8, but when trying rpm -i or rpm -Uvh it complains that I already have version 5.0 on there. I am happy to replace, upgrade or install another instance. ...
0
votes
2answers
720 views

Why does “yum update” fails with many duplicates, after many months of no upgrades?

After many months (> 6) of no software upgrades, I logged into an EC2 instances running: Linux version 2.6.32-358.23.2.el6.x86_64 (mockbuild@x86-022.build.eng.bos.redhat.com) (gcc version 4.4.7 ...
1
vote
2answers
91 views

shall we rerun `createrepo` after copying new files in repositry

I have a repository installed. I wanted to update that repository with new rpm files. Can I rerun createrepo command on this repository for updating my new available files to servers?
0
votes
2answers
88 views

Best secure way to update back-end servers?

Our back-end servers (Redhat 5,6 mostly) are very outdated, and are not connected to the Internet for security reasons. I'm looking for the best strategy to update them, without connecting them to ...
0
votes
1answer
420 views

linux + how to install glibc.i686

I try the following, but I get No package glibc.i686 available. What do I need to do in order to install the glibc.i686? Or maybe there is another way to solve this problem? yum install glibc.i686 ...
5
votes
1answer
363 views

Why did removing iptables “break” my network access?

To remove iptables i used yum : # yum remove iptables -y But this removed a lot of packages : Remove 262 Package(s) Installed size: 710 M Downloading Packages: Running rpm_check_debug ...
0
votes
1answer
3k views

No package * available. cannot install git through yum

I am trying to install git on my Red Hat Enterprise Linux 6.5 server and have hit a brick wall. I can't find the package dependencies for git using yum. [root@FOOBAR mydir]# yum install ...
2
votes
2answers
91 views

Does Redhat subscript provide access to yum repositories?

I created an install script on an AWS Redhat instance and i'm not trying to use the same script on a base Redhat install. Nearly every package in my script comes back as "No package..." I've ...
2
votes
1answer
2k views

local yum repository with grouplist not working

I am trying to create a local yum repository with group list for RHEL 6. Packages from DVD are dumped at the following location /var/www/html/rhelisos/ To create the repo, I used the following ...
1
vote
1answer
716 views

Update a Red Hat repo with no packages

I'm attempting to install a handful of packages on my RHEL 5.10 (Tikanga) server, however I'm prevented from doing this because of an installed repo with zero packages. When I do yum repolist, it ...
1
vote
2answers
2k views

CentOS how to update Ant Version to 1.8.x and higher?

I'm using CentOS v6.5 and installed Ant by using: yum install ant But it came with Ant version 1.7.1. And i need the latest Ant version 1.8.0. How to properly get the latest Ant version 1.8.x (or ...
2
votes
1answer
353 views

obsoleted package breaks yum install of older JBoss

I need to install an older version of JBoss. 6.1.0 EAP is what has been approved and supported for my application. So when I try to force install the correct version of the jbossas packages the ...
1
vote
1answer
89 views

What problems should I expect when adding a CentOS yum repository to RHEL?

I've added the CentOS 6 Updates yum repository to my RHEL 6.4 machine. That's because RHEL doesn't ship with the php-snmp package - and the easiest one to find is on the CentOS site. Anyways, this ...
0
votes
2answers
2k views

Why is yum not installing my softwares on RHEL 6 ?

I am trying to install avr-gcc using yum on a RHEL 6. But I get this error. [root@xilinx etc]# yum install avr-gcc Loaded plugins: refresh-packagekit, rhnplugin There was an error parsing the RHN ...
1
vote
2answers
3k views

yum installs an old version of cmake

For some reason when I run yum to get cmake it will install an older version. Could it be because my repo list is not complete? I'm on CentOS 6 using a minimal desktop install from the non-net install ...
1
vote
3answers
60 views

Yum not working

When I try to execute yum I get this: My guess is I need to start the Ethernet connection because I cant ping and this is what what we do with SL6. I'm new to CentOS that is why I ask. I've ...
1
vote
2answers
1k views

Installing PostgreSQL 9.0 on RHEL 6.4 (How to get Yum to Include a version of OpenSSL I built from source)

I receive the following errors from yum install postgresql90-server: Error: Package: postgresql90-9.0.15-1PGDG.rhel6.x86_64 (pgdg90) Requires: libssl.so.10(libssl.so.10)(64bit) Error: Package: ...
0
votes
1answer
348 views

Yum update shows “Killed”

When I update my RHEL with yum update commend, it list all update packages, and after I hit Y for yes, got following response. Running rpm_check_debug Running Transaction Test Transaction ...
1
vote
1answer
29 views

Yum adds the dir 'Package' to baseurl

I'm on a network that doesn't get outside internet. I have the repo file pointing to a http server on the network that has the packages that came with the RHEL install cd. Most of the servers work ...
1
vote
1answer
848 views

Yum user temp files (/var/tmp/yum*) fills up with repo data

On my rhel6 system, non-sudo users can do yum check-update. Files are then placed in /var/tmp/yum[user]*/ . The repodata there gets quite large. Can I: Configure the location? Configure yum so it ...
0
votes
2answers
11k views

Yum update error: Could not retrieve mirrorlist

I'm trying to do yum update. This is the error I'm getting. sudo yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile Could not retrieve mirrorlist ...
1
vote
1answer
295 views

Public key for git-…rpm is not installed

When attempting to install git (and probably other packages), I get this error: $ sudo yum -y install git Installing: git x86_64 1.7.11.3-1.el6.rfx ...
2
votes
1answer
3k views

Resolve dependencies installing rpm packages

I am using RHEL6 Hi i have created the yum repository, i downloaded the snort rpm package from their website when i tried to install the rpm its thorws error e.g. snort-2.9.5.3-1.f18.i386.rpm ...
2
votes
1answer
589 views

Yum can find a package, but can not install it

How is it possible? [root@server1 ~]# yum search diy Loaded plugins: product-id, rhnplugin, security, subscription-manager This system is not registered to Red Hat Subscription Management. You can ...
0
votes
2answers
788 views

Does Yum have an equivalent to apt / aptitude's DEBIAN_FRONTEND=noninteractive?

On Ubuntu you can use something like this: export DEBIAN_FRONTEND=noninteractive sudo -E apt-get update Which will prevent things that require input (choosing grub versions or conflicts between ...
0
votes
1answer
899 views

problem with installing packages

I get these messages when I run this command: # yum install pcre pcre-devel php php-common php-gd php-cli php-mysql flex bison Loaded plugins: product-id, refresh-packagekit, security, ...
2
votes
1answer
518 views

Can I use yum to manage a “package” installed from source

I am running CentOS 5.5. I need to upgrade some packages to newer versions, unfortunately they're not available. I am stuck building from source. Is there a simple way to use yum to manage ...
0
votes
1answer
495 views

How to Install all the default packages by group Using the Local YUM repo

I created a Local HTTP YUM repo. I can install the individual packages. But is there a way to install packages in the available groups? When I tried to install using groups, it give me this message: ...
3
votes
2answers
2k views

Where do installed RPMs go?

I download and install packages on my Red Hat Enterprise Linux Server 6 machine using YUM package manager in command-line mode. When I install apk files on my Android phone, they go to /data/app ...
3
votes
1answer
832 views

Error while loading shared libraries after installing a program

I was installing rfc5766-turn-server. But it fails to launch with an error: error while loading shared libraries: libevent_core-2.0.so.5: cannot open shared object file: No such file or directory ...
0
votes
1answer
246 views

RHEL6 Install MySql-Python without internet connection?

Using RHEL 6 how can you install MySql-Python package without a internet connection? I can SCP files to the server but our current restrictions do not allow a direct or proxy connection to the ...
1
vote
2answers
5k views

On Red Hat Enterprise Linux 6.2 how can I use Python 2.7 as default not Python 2.6? I did but still showing 2.6?

RHEL 6.2 I have python 2.6 but I need default python 2.7 using yum packaging (so that nothing goes messed up, cause its a heavy duty working system, all I need the python 2.7 on it, without messing ...
1
vote
2answers
872 views

YUM UPDATE stuck forever

I created repository for RHEL 5.6 . There was already an exiting repository for RHEL5.2 which I deleted. And i run following commands yum clean all yum clean metadata then, Yum list all It list all ...
-1
votes
2answers
801 views

yum install wireshark-gnome [closed]

I tried using command yum install wireshark-gnome to install wireshark on RedHat 6.3. And I make sure the network is ok. But it fails cause by below prompt. Loaded plugins: product-id, security, ...
0
votes
3answers
5k views

-bash: yum: command not found

I have one server with Red Hat Enterprise Linux AS release 4 (Nahant Update 3) installed. And I tried to add the online repo using this link: Centos Wiki: RPMForge And everything goes smooth. But ...
0
votes
1answer
54 views

Finding RPMs for Install

I'm trying to install later version of software for 2 RPM-based installations, but yum tells me that I already have the latest versions. When looking to install software via RPM, what's the best way ...
4
votes
1answer
2k views

Yum Check Available Package Updates

Red Hat docs say: To see which installed packages on your system have updates available, use the following command: yum check-update What command must I run to view all available versions for ...
0
votes
1answer
124 views

ERROR:While Updating

I am using RHEL6.Whenever I am tryiung to update my machine it says that [root@ASL-DRDO manmatha]# yum update Loaded plugins: product-id, refresh-packagekit, security, subscription-manager This ...
0
votes
2answers
3k views

How to install vsftpd package

I am having a rhel6 server i want to install vsftpd package from there to my client machine How to do this.