XEN is a hypervisor based virtualization technique.

learn more… | top users | synonyms

0
votes
0answers
8 views

Why cannot I ping an xen domU through the bridge?

I am on a Debian upgraded from 7.11 to 8.5, so the xen package is upgraded from 4.1 to 4.4. I do not know much about networks, but when I see a diagram like this (taken from the Xen Networking wiki ...
0
votes
1answer
829 views

Change screen resolution of Xenserver Console for a CentOS VM

I need to increase screen resolution to 1024x800 for my XEN console. I tried to place vga=791 at the end of kernel line the file /boot/grub/grub.conf but it seems that most of the boot arguments ...
3
votes
2answers
2k views

Measuring CPU %steal on VMware and Hyper-V hypervisors

For Xen Linux guests, %steal time is readily available via top and other utilities. Is it possible to get this and related metrics from within a Linux guest when running a non-Xen hypervisor such as ...
0
votes
0answers
22 views

Xorg refuses to start with radeon driver, attempting to pass through NVIDIA GTX970 using Xen on Mint 18

I am attempting to pass through my GTX 970 to a Windows VM using Xen (I already have the hypervisor in place and am currently just running Linux Mint 18 on Dom0). I am attempting to use a Radeon R9 ...
0
votes
1answer
863 views

xe sr-create type=ext results in backend failure

I'm trying to create an ext based storage repository: xe sr-create content-type="local SR" \ host-uuid=c7030a1f-15e3-7e7d-2932-b30200a15917 type=ext \ device-config-device=/dev/sdb1 \ shared=...
0
votes
2answers
180 views

Is it possible to install Xen on a computer (processor supports virtualization) alongside Ubuntu and Windows?

The computer currently triple boots Ubuntu and a couple of Windows versions. Now I want to add Xen into the mix. Would it work if I simply made a new partition for Xen, or does it need to take over ...
1
vote
1answer
21 views

How to install CUDA on Linux Mint with Xen already installed?

Xen is installed on Linux mint. How to install CUDA without getting a black screen or command line on restart? In other words, how to get Xen's Dom0 Mint Desktop with CUDA installed?
0
votes
0answers
24 views

Converting A Physical Ubuntu Server with boot raid 1 to a Xen domu

So here's the situation: 1 physical server running a very outdated version of ubuntu 14.04 Booting off of a a software raid 1 configured in the installation. This server runs mission critical ...
0
votes
0answers
29 views

Install CentOS 6.2 GUI with XenServer 6.5

This is my first time to use XenServer 6.5. I want to add a CentOS 6.2 Virtual Machine into my XenServer. I put the CentOS 6.2 iso and added > vnc in boot parameter. Below are the screenshot: After ...
2
votes
1answer
8k views

Getting “cpio: Bad magic” when trying to rpm install into a mounted Logical Volume

I am trying to follow the Xen guide to provision a domU using package installation of the Fedora 15 release (the dom0 is CentOS 5.6). I've run the rpm install command with an alternate root to a ...
2
votes
1answer
147 views

Bridged networking problem with Xen 4.6 and Ubuntu 16.04

I'm trying to setup a Xen virtualization on Ubuntu 16.04, and Xen 4.6. My plan is to have 1 private network, as well as virtual servers with public IP addresses which should be accessible externally (...
1
vote
0answers
38 views

How to install Fedora on Xen with the LiveCD image?

I've managed to get the Fedora LiveCD image (Fedora-Live-Workstation-x86_64-21-5.iso) to boot in Xen using the following configuration: name = 'fedora_x86_64' memory = 1024 disk = [ 'file:/path/...
0
votes
1answer
56 views

Xen + DRBD + Pacemaker on Centos7

So my current environment is centos7 on a pair of identical bare metal servers. I've installed drbd and carved up 3 x 100G block devices for DRBD to mirror. Then I installed a Centos7 image on one of ...
1
vote
1answer
239 views

Creating new SLES 12 VM on XenServer 6.5 fails

When I try to create a new SLES 12 VM on a XenServer 6.5 host it fails with this error message: "Failed","Starting VM 'AAEB-PUBLIC218LY' Internal error: xenopsd internal error: VM = 4d956449-...
2
votes
0answers
58 views

Virsh (libvirt-bin) is not able to communicate with Xen server

I have installed the latest version of Xen server 6.5. Now I want to connect to it with virsh (libvirt-bin). When I do this I get the error error:end of file while reading data: sh:nc:command not ...
0
votes
0answers
20 views

Kernel bug at at fs/dcache.c on XenServer

Yesterday on of our servers running Xen 6.5 restarted, in /var/log/messages I found following messages: Apr 29 11:52:59 server kernel: [7476681.051566] ------------[ cut here ]------------ Apr 29 11:...
1
vote
1answer
22 views

Where to find information about tests from Phoronix test suite?

Phoronix Test Suite is a linux benchmarking tool made of tests and suites of tests. To print all available test phoronix-test-suite list-available-tests To print all available suites phoronix-...
0
votes
0answers
38 views

Qubes/Xen OS: access file manager for dom0

I hope somebody more experienced with Qubes specific terminal commands can help. If the KDE manager is installed, how does one open via terminal input the file manager for 'dom0'? To browse 'Home' ...
1
vote
0answers
48 views

xen + libvirt share disks betwee VM on diferent hosts

I have another problem. what I've done is: We deploy 2 physical hosts with SLES 12 SP1 and install XEN hypervizor on both. On each host we provide few block devices via FC. On each host we ...
25
votes
2answers
39k views

BUG: soft lockup - CPU# stuck for x seconds

I've seen a few bug reports and questions (on stackexchange and elsewhere) regarding a nagging "BUG: soft lockup - CPU#<n> stuck for <dt>s!". So far, I haven't found any clue as to what ...
1
vote
1answer
378 views

Networking problem with new Intel NUC

I recently got a new Intel NUC6i5SYH to replace my very old and not too powerful home server. I've installed XenServer 6.5.0 (as was on the old server) and plan to just copy over the VM's and other ...
0
votes
0answers
53 views

Curses interface for text-mode Xen DomU's

QEMU implements an -options curses (previously -curses) flag for text-mode OSs. From the qemu(1) man page: Normally, QEMU uses SDL to display the VGA output. With this option, QEMU can display ...
0
votes
1answer
28 views

Restore a disk from a snapshot in XEN 4.6

I created a snapshot with lvcreate -n snap01.vm01 -L 5G -s vg0/vm01.eclabs.de now I did some stuff on my disk i don't want to keep and want to revert it to the snapshot point. How do I restore ...
1
vote
1answer
782 views

Install Xen 4.6 on Debian jessie

I need to install Xen with LVM on my dedicated root server. The current version Xen 4.4 in Debian jessie does not support the new Skylake intel processors. I tried Debian stretch, which has Xen 4.6 ...
0
votes
0answers
88 views

Xen DomU PV - how do I get graphics?

Both Dom0 and DomU are Arch linux. Because Xorg :0 -configure results in video card not found as I'm in a DomU, I created a xorg config file. /etc/X11/xorg.conf.d/10-monitor.conf Section "Monitor" ...
1
vote
1answer
269 views

Boot problem with grub; Arch Linux, Xen, Dom0

After installing Arch I installed grub with these commands: pacman -S grub grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=grub --recheck grub-mkconfig -o /boot/grub/grub.cfg ...
0
votes
0answers
60 views

How do I boot into Ubuntu 12.10 or higher WITHOUT using grub2, but just grub?

I have a machine I SSH into on a Rackspace virtual XEN environment originally built as Ubuntu 11.04, but I have since upgraded to 12.04 with a grub 1.99 on menu.lst, not a grub2. The do-release-...
3
votes
1answer
2k views

Booting from ISO in Xen Paravirtualized Environment

Specifically, Citrix XenServer 5.6. I can map the an ISO from a Storage Repository with no issues and mount it inside the OS but I can't boot from the DVD drive without converting it to HVM, which ...
0
votes
0answers
22 views

How to extend a windows volume on xen xm virtual server

I have inherited a Xen virtual server running debian 2.6.32. I have two windows hosts and one of them needs more disk space. I am thinking I should be able to rob a few GB from one of the windows ...
2
votes
1answer
205 views

Should I use KVM or Xen ? What are the main differences? [closed]

I've spent a few hours trying to understand the differences between KVM and Xen without much succes. So both are Type 1 Hypervisors with comparable performances (source) and I don't understand what ...
1
vote
0answers
202 views

Running QEMU inside XEN virtual machine

Is it possible to run QEMU inside XEN virtual machine? I tried to enable the XEN nested virtualization for with following options to virtual machine configuration file in /etc/xen/vm1.cfg: hap=1 ...
1
vote
0answers
30 views

How can I trigger scripts on a virtual machine when I insert a CD or DVD in the host?

I have a PC running XenServer 6.2.0 It hosts, among others, an Ubuntu VM that I configured to rip and copy my CD/DVD collection to the NAS hosting my media collection. What I would like it to do on ...
0
votes
1answer
191 views

Installing Xorg on ASRock AM1H-ITX (Xen DomU Arch-Linux LXQT): startx and no screens

Dom0: Arch Linux DomU: Arch Linux The problem seems to be that the DomU can't find the Video Card. inxi -F (DomU) System: Host: ArkOS_Dev Kernel: 4.2.5-1-ARCH x86_64 (64 bit) Console: tty 0 ...
0
votes
1answer
79 views

How to debug Xen dom0 sluggishness?

Some months ago I ran an helloworld MirageOS app on Xen on my machine without any problem, now I wanted to get back into using Xen, but I have some issues. Plenty of things changed: The previous ...
0
votes
1answer
75 views

xl create problem with Arch Linux, Xen, DomU LVM

This is still my first time setting up a DomU. With Dom0 being Arch Linux and DomU as well. I recently figured out that I would need an LVM for my setup as I want at least two partitions (root + swap)....
1
vote
0answers
14 views

Networking issues after XEN guest migration

Yesterday, after mirgation of my CentOS 5.3 VPS from ISP to my own local XEN, I was a little bit complicated: after changing all network settings inside: /etc/sysconfig/network-scripts/ifcfg-eth0 (...
1
vote
1answer
73 views

Boot problem with grub; Arch Linux, Xen, DomU

Inside my Dom0 My error log: sudo xl create /etc/xen/arkOS-Dev_PV.cfg /var/log/xen/bootloader.1.log pyGRUB version 0.6 ┌────────────────────────────────────────────────────────────────────────...
1
vote
1answer
22 views

how can I create filesystem on the additional drive

I have a dedicated server with Xen virtualization and I have many VPSs on it I requested from datacenter(Hetzner) to add another HDD but now how can I setup the additional HDD to use it for creating ...
0
votes
1answer
31 views

Is the running Xen Suse OS just Dom0?

When I select "Xen" option during Suse boot which has installed "Xen" tools: Is the running OS just Dom0?
0
votes
1answer
387 views

Xen error: “xl list” complains about libxl

After having installed Xen on Arch Linux, I cannot issue any xl commands, getting this error: xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): ...
0
votes
0answers
43 views

bridge does now work in Xen-4.5.1 on centos

I installed Xen-4.5.1 on CentOS6.5 and create a bridge "xenbr0" and modified ifcfg-eth0 at the same time. ifconfig eth0 Link encap:Ethernet HWaddr 00:1E:67:12:83:B4 inet6 addr: fe80::...
0
votes
0answers
130 views

How to start xend service automatically on boot?

I am trying to auto-start xend and xendomain service automatically on boot as soon as I log into XEN-dom0 (on Ubuntu server 12.04 x64) so that when I type : sudo xm list the hypervisor lists me all ...
0
votes
0answers
186 views

Dump XEN guest memory image

I am new into memory forensics thing and I am trying to dump a memory image from a XEN guest (Ubuntu 12.04 x64 - domU) in order to analyze it on dom0 (Ubuntu server 12.04 x64) with volatility . For ...
1
vote
0answers
121 views

How to run Windows with GPU virtualization?

A year ago I switched to Ubuntu for my primary OS, which has worked out just fine. Every now and then I want to play computer games and while using Wine often works, I can't get all of the games that ...
0
votes
1answer
270 views

CentOS 6.7: cannot disable netfilter for Xen bridge

Following sysctl.conf settings at Xen host does not work: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 # sysctl -p ... ...
2
votes
2answers
612 views

run FreeBSD 10 (as guest) under Xen on Linux

I have my Linux/Debian/Sid amd64 (with i7 3770K, 16Gb RAM, 1 SSD + 2 hard disks) PC with xen (notably I have installed a package xen-linux-system-amd64), so sudo xen list Name ...
2
votes
1answer
136 views

Is it possible to read PVclock from user space?

Is it possible to read clocksource xen or kvmclock using some user space tool? Referring to /sys/devices/system/clocksource/clocksource0/current_clocksource. Reading the actual value of the pvclock. ...
0
votes
1answer
785 views

Systemd hangs in Xen Dom0 immediately after switch_root in boot process

I've been trying to set up Xen to work with UEFI and my Arch Linux install (3.18.2) as a Dom0 but have been unable to boot. Of note is the fact that it will boot completely fine otherwise, just not ...
1
vote
1answer
32 views

Old Xen Installation Unable to be Formatted

I recently tried to format a disk that had an old Ubuntu 14.04 partition and a Xen Swap Disk partition. I am currently running the Ubuntu Live CD and trying to access my partitions on the drive for ...
3
votes
1answer
1k views

libvirt daemon doesn't start on Gentoo [closed]

I'm trying to use Xen with virt-manager on Gentoo system and I have some troubles with libvirt daemon. When it starts: Starting libvirtd ... /usr/sbin/libvirtd: error: Unable to initialize ...