1
vote
1answer
65 views

How can I get xrandr to detect both nvidia cards: 2 x GTX480, triple-head?

I am running Linux Mint 16 (Petra) I am running the default driver nvidia-319 shipped with the distro I have 2x GTX480 cards I have 3 monitors Using the Nvidia driver, all monitors and GPUs are ...
2
votes
0answers
14 views

Disabling an Xorg server's extension at runtime (for new clients)?

I have an old Xorg server whose "Render" extension seems to be buggy (if enabled, most of the fonts are invisible, unless hovering over them -- after upgrading the packages with X clients and ...
5
votes
2answers
67 views

Killing X-related processes when CrashPlan is running

I am currently running Ubuntu Server 12.04, but this applies to all flavours of Linux really. This server does a bunch of things and is controlled remotely via ssh. Some time ago I have installed ...
1
vote
0answers
17 views

Can I make a second mouse/keyboard (virtual) for xdotool to use?

I have a script running a set of xdotool commands. It only uses half of my screen but I cannot use my keyboard or mouse while it is running due to the number of clicks and typing that is executed. Is ...
2
votes
2answers
179 views

NVIDIA driver upgrade failed

I downloaded the latest(331.49), tried to install, but failed. I compiled the kernel module and at the end of the installation it said that it went successful. But on bootup it said: version mismatch, ...
1
vote
2answers
56 views

what is the difference between X11 and Xlib?

I am not sure if I have got it right. Xlib is a library to interact with X server. X11 is just another name for X server. Is X server just a single library? if so, why we can't access it directly? ...
2
votes
0answers
26 views

xinitrc: starting xterm with tmux causes all windows to share same geometry

I have xterm with tmux open upon startup of X11 with the following line in my xinitrc file: xterm -e tmux & However the -e tmux causes all windows to assume the geometry of the first -geometry ...
2
votes
0answers
36 views

How to remove “dead window parts” after GUI errors?

I have experienced this problem with Chrome only (but for quite a while now, different versions) but the question is not about Chrome but about X (I guess). Sometimes (I am not aware of any pattern) ...
0
votes
0answers
20 views

logname not working under X session

I would like to find out the name of the user at the end of a sudo-chain. The exact tool for this is logname or also who am i works as well. My problem is that while over SSH or tty1 (Ctrl+Alt+F1) ...
1
vote
1answer
34 views

Program for choosing computers to run X clients on - what are such programs called?

At my college some 20 years ago they ran HPUX and had several X-terminals (terminals with graphic-cards that ran an X server, but left the running of X clients to the main computer). The college had ...
0
votes
1answer
51 views

How to start X program on local display? [duplicate]

I'm ssh-ing into a Raspberry Pi. I would like to start an X program remotely, on the Pi's display. I know you can export DISPLAY to have programs open up on your computer when you ssh-in. But I'm ...
0
votes
0answers
34 views

Multiple XkbOptions in xorg.conf

how should I write multiple XkbOptions in xorg.conf? I've tried "option,option,option", "option, option, option", "option option option" and none of these worked - only the first option was executed.
2
votes
1answer
45 views

What are the purposes of the different types of XWindows fonts?

In my /usr/share/fonts/ I have four sub-directories categorizing types of fonts: cmap truetype type1 X11 The command fc-list produces a list of them. Are these different categories for specific ...
1
vote
0answers
59 views

Xorg Configuration for Unregistered Resolution

I have a monitor with native resolution of 1600*900_60.00, and the intel on board Gen3 Xeon video chipset (i915). when i do $> xrandr the 1600x900 resolution is not in the list. I tried to write an ...
1
vote
1answer
34 views

configure xscreensaver through X resource database

I want to get rid of the xscreensaver config file in my home .xscreensaver. I read in man xscreensaver, that: Options to xscreensaver are stored in one of two places: in a .xscreensaver file in ...
1
vote
0answers
48 views

Xinerama configuration on OpenSuse

Configuration: OpenSuse 12.3 installed from the Sage Live CD (http://www.sagecommons.org) Latest proprietary NVIDIA drivers Dual GTX580s Four displays (two per card) Displays in a 2x2 arrangement. ...
2
votes
1answer
63 views

Writing single-handed layouts for X

I know someone who'd really like to be able to type with only the left hand, so I had the idea of writing a layout which "switches" the sides of the keyboard when the caps lock key is pressed. For ...
3
votes
1answer
118 views

Running GUI application as another (non-root) user

Let's say I have 2 user accounts user1 and user2. When I login as user1, and then switch to user2 using su, I can execute command-line programs, but GUI programs fail. Example: user1@laptop:~$ su - ...
0
votes
1answer
34 views

Text Data from X Client for usage in android app

Is it possible to write a program such that it can capture the data from an X Client to X server and extract only the Text data inside it? I have to port a legacy application to android and the ...
1
vote
1answer
283 views

Certain fonts missing from xlsfonts in Centos 6.4

I have a certain software on CentOS 6.4 that gave the following error: X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 45 (X_OpenFont) ...
0
votes
1answer
192 views

How can I set up multiseat/separate X sessions with gnome 3? [duplicate]

With classic Gnome, if one had two monitors, one could set up "separate X sessions" for each monitor. In this configuration, each monitor had a separate user login session and application windows ...
2
votes
0answers
70 views

Xorg Setting checking from Command Line

How do I determined, whether Xorg is using Xinerama, DDC and Reduced Blanking ?? Just adding few options in Xorg.conf is sufficient ? If I have to check from command-line, then how can I check ...
3
votes
2answers
268 views

Viewing a part of the screen in a window on Linux

I plan to make a presentation with a live demo using my wide screen Ubuntu 12.10 Laptop and a projector. My plan is to connect the projector as a second (small) display and put my slides and live-demo ...
5
votes
1answer
553 views

How to detect which keyboard device is being used

I'm working on a computer with two keyboards and two users. They are using different layouts. The two keyboards are identical. Their device ID can be found easily with xinput, but when typing we can't ...
0
votes
0answers
133 views

PUIAS 6.4 four monitors working xorg.conf

Fox, I would like to make this post in order to save the time to people who would like to use 3-4 monitors on PUIAS 6.4 (RedHat 6.4 clone). My Lab just got some Dell Precisions T1650 with few ...
2
votes
1answer
812 views

How start a second X session?

I tried to do it with the command startx 1. It seemed to flicker to a different screen momentarily, but then exited. Got the following error: /usr/bin/xterm: No absolute path found for shell: :1 ...
1
vote
1answer
714 views

How to use all buttons of SteelSeries Cataclysm MMO Gaming Mouse in Xorg (GNOME)?

I've a problem with my mouse on Gentoo. The normal buttons (left/right/wheel and previous/next) work, but the other buttons are not recognized by x. I tried in xev and using them does not do anything. ...
0
votes
1answer
710 views

Trying to open a GUI from a remote server using Mac but not succesfully

I'm brand new user in MacOSX. I'm using ssh to connect to some Linux servers. I'm trying to open a GUI locally for a process running in the remote Linux server. So I read that I should install ...
4
votes
2answers
476 views

How to make gdm3 start X installed in a different path (or running X from a personalized path)?

I've built the entire Xserver from git for testing proposes using the build.sh provided by freedesktop.org as the easier method to compile all modules against the git tree, and installed under the ...
1
vote
1answer
62 views

Splitting display among computers

If i have 17 system units (computers with monitors) that connected using network, is it possible to display image or video splitted into those computers without having split it manually? 1 2 3 4 ...
1
vote
1answer
54 views

What graphical launcher program can I use?

I have the following setup: I am running Ubuntu on VirtualBox in a Windows Environment. I am using Xming launcher to start xterm from Ubuntu as a client from where I can launch other graphical ...
1
vote
2answers
364 views

Is xinitrc executed when logging in?

I have a ~/.xinitrc with the following content xrdb -merge $HOME/.Xdefaults this xinitrc is basically useless because it's not loaded when the user logs in, I don't think that I'm doing something ...
2
votes
3answers
728 views

How does GDM authenticate to the X Server?

Given that you usually have to authenticate to the X Server by way of a "magic cookie" stored in the .xauthority file in the user's home directory: How does GDM (like most login processes, running as ...
0
votes
1answer
630 views

urxvt not loading xft font from ~/.Xdefaults

Some basic details: archlinux 3.9.3-1 xmonad 0.11 urxvt 9.18 I can get urxvt to load my desired font manually using: urxvt -fn "xft:Ubuntu Mono" However, I'm unable to get this font to load ...
9
votes
2answers
526 views

How to Save X Session — ArchLinux+Openbox

I use Arch Linux and Openbox. How can I save the state of my current openbox/X session and later restart them? The scenario is like this: I've several browsers windows open, terminals, file ...
8
votes
2answers
184 views

Single key audio capture in Linux (save on key release)

I'd like to run a program that records audio only when the Right Control key is held down. On keyboard release the result would write to disk as, e.g. yy-mm-dd hh:mm.ogg. How might I do that? $ ...
1
vote
1answer
118 views

Virtual mouse driver, possible X11 problems

I created virtual mouse driver according to Essential Linux Device Drivers book. After I wrote coordinates echo x y > /sys/ ... /coordinates into sysfs node, my program generates event packets ...
2
votes
1answer
158 views

difference between X and Xorg executables under Debian 6.0(kernel 2.6.32-5-686)

What is the difference between X and Xorg executables? I have both in /usr/bin directory: # file /usr/bin/Xorg /usr/bin/Xorg: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically ...
5
votes
3answers
1k views

How does X-server calculate DPI?

From Xfce Docs: In case you want to override the DPI (dots per inch) value calculated by the X-server, you can select the checkbox and use the spin box to specify the resolution to use when ...
1
vote
1answer
152 views

Which user owns X display?

How to determine, as root, which user owns X display :0? (on a Fedora 18 system with defaults)
1
vote
2answers
371 views

Running Mono on CentOS 5 CLI

I have vps server (virtual private server) running on Linux CentOS 5 32 bit , I installed vncserver X-Windows , GNOME and KDE environment and I connect to the VNC server from vncviewer in my Windows 7 ...
1
vote
1answer
241 views

Setting the minimum pointer speed with no usable GNOME GUI

I use Debian Squeeze x86-64 (Kernel 3.2) with gdm3 and GNOME on a 2010 MacBook Pro. Recently, as I tried changing the pointer configuration, I accidentally set the minimum speed of the pointer to 0 ...
1
vote
1answer
2k views

Can X11 scale to virtual resoltions on HiDPI/Retina screens the way OS X does?

I've recently had the chance to use a Macbook Pro with Retina Display, and its quite clear that the display is futuristic enough to actually warrant Apple's over-the-top marketing. I've got sensitive ...
2
votes
1answer
172 views

How to force X to use specific display, regardless if it is plugged in?

As it says in title: How to force xorg to use specific display trough HDMI, regardless if it is plugged in? I have TV that has some crazy "power save" option that can't be turned off and X thinks ...
2
votes
1answer
552 views

How can I automatically disable my laptop's built-in keyboard in X.org?

Distro and X.org Version Information I am using Ubuntu 12.10 with xserver-xorg/quantal 1:7.7+1ubuntu4. Disabling Built-In Keyboard in X11 I have a laptop with a built-in keyboard that no longer ...
3
votes
2answers
3k views

How to configure xorg.conf for widescreen VNC on headless Linux/Ubuntu?

I have a Ubuntu 12.10 Box configured to run headless. I've managed to boot X headless by a lot of trial and error but I still have a glitch: When booting using the monitor, it all works ok, widescreen ...
2
votes
0answers
160 views

Cyborg RAT mouse with xserver

I got a cyborg RAT3 mouse. This mouse got some problem to work on linux. I'm under lubuntu 12.10. I have searched some solutions on google. I have done this : I created /etc/X11/Xmodmap file, and I ...
0
votes
0answers
141 views

Input freeze when X starts on other terminal

I have a Packard Bell F2011HC-125GE running a Debian Squeeze-based Linux. After a few days of usage i found the system freezes from time to time. It's obvious the freezes happen, when X starts while ...
5
votes
0answers
224 views

How to disable select-on-release right mouse button in Linux [duplicate]

We are having issues with mouse behavior in Linux. In Windows: In any application, to open a context menu and select an option: right mouse button down + release move the cursor to an option left ...
3
votes
1answer
2k views

xming debian can't open display

I followed numerous guides for setup and even more "can't open display" error solution, but still can't find what's wrong. First, on VPS Debian Squeeze I installed xserver-xorg-core and xauth. Then ...