WiFi is a networking technology permitting the exchange of information through wireless (radio) connections.

learn more… | top users | synonyms (1)

2
votes
1answer
338 views

How do I find out if my wireless card supports 5ghz?

I have the 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 2200 (rev c4) Hwo do I find out if that card/driver support 5 GHz?
0
votes
0answers
22 views

How can I make CentOS 6 treating WiFi flexibly like Ubuntu 12.04?

In my office, I have AT&T Uverse. The router is a 2wire 3600HGV. The WiFI is provided by a Cisco Linksys E1000 that is plugged in the 2wire device. With my notebook running Ubuntu 12.04 LTS ...
1
vote
0answers
11 views

Why do I get “authentication” errors on this “Open” configuration?

I have the following ifcfg-wlan0 file: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.5.1 NETMASK=255.255.255.0 NETWORK=192.168.5.0 NAME=wlan0 USERCTL=no the following dhcpd.conf file: ...
0
votes
0answers
44 views

Can't connect to WiFi

I recently installed Arch but didn't set it up yet. In particular, I can't connect to WiFi, although it's visible (in Arch). When I click on it, nothing happens. What might be the issue? $ ip addr 1: ...
1
vote
1answer
253 views

Fluctuating wifi signal and random disconnects rtl8192ce

Running Ubuntu 14.04 on a custom build. I have Encore wireless N300 PCI-E Adapter ( seen here ) The driver is available for download at this link as well. I am reading that a common fix for connection ...
3
votes
2answers
155 views

WiFi not working after restoring from hibernation (authentication times out)

My Intel 6205 wireless network card does not work after hibernating. It sometimes also does not work on boot, failing in the same way. Occasionally, it also stops working after ~10 minutes of ...
0
votes
0answers
24 views

IPv6 - how to force traffic destinated for same system but another interface to pass through the wireless network?

I want to perform some IPv6 stress testing (file transfer, flooding, Neighbor Discovery, etc) on wireless routers using a system which has two network interface cards. However, all traffic goes ...
0
votes
0answers
14 views

Two WiFi cards shown instead of WiFi and Bluetooth?

I have an Intel Centrino 6235 WiFi and Bluetooth card but I can't get the bluetooth working at all. The weird thing is that when I run lspci I get 03:00.0 Network controller: Intel Corporation ...
5
votes
2answers
153 views

Lenovo t440s fedora 20 WiFi authentication problem

In some WiFi networks, consistently in hotels so far, my computer cannot connect and prompts that authentication failed, when the password is correct. This is a very annoying problem that I don't know ...
1
vote
1answer
63 views

How do I edit the hotspot configuration for Network Manager?

Running Arch/Linux with everything up-to-date and I use network manager's built-in hotspot function to share my Internet. I'm trying to edit the configuration (mostly the password, as I don't like ...
0
votes
1answer
57 views

connecting to a wifi using wpa_supplicant

I have some problems connecting to my WiFi (WPA2, standard settings) using wpa_supplicant. My /etc/wpa_supplicant.conf is as follows: network={ ssid="MYWIFI" psk=******** } then my ...
0
votes
0answers
25 views

wificard goes into disabled state setting up AP in N-mode

I've recently set up an Access Point using the Ralink RT5390, using Linux Kernel 3.12.18. I'm using the rt2800usb module as the driver for the card, and rt2800.bin v0.29 as the firmware. The access ...
0
votes
0answers
275 views

How to associate using aireplay-ng [Reaver]?

I'm a bit of a noob (complete noob) and linux and wifi hacking have always fascinated me. I just started last week. I came across Reaver but it always fails to associate with the AP, and guides online ...
1
vote
4answers
107 views

Unable to connect to wireless

So I've been dual booting eOS with windows 7 for about 3 weeks now and I've absolutely loved it. I haven't had any problems until today. For some reason I cannot connect to my wireless router. I went ...
1
vote
0answers
61 views

How to set Ralink RT5390 into N mode using iw?

I'm working on supporting a new wifi card for my company. This is the first n mode card I've worked with, previously we've used iw to set the cards into either b or g mode as follows: case $mode in ...
1
vote
1answer
56 views

Madwifi VAP (and wlanconfig) modern equivalent

It appears that the Madwifi project is deprecated, so I am curious if there is a replacement for the wlanconfig utility that allowed users create Virtual APs. I did search for wlanconfig in my package ...
0
votes
0answers
73 views

Unstable wireless connection on Debian 7.5 with a AR9382 chipset

I recently reformatted my primary drive (I have a custom built machine based on a Clevo P150 chassis), and decided to opt for Debian (7.5 / Wheezy) after some years using Ubuntu. My issue - which I ...
0
votes
0answers
62 views

WiFi fails in LXLE 12.04.4

Installed LXLE 32-bit 12.04.4 on a Dell Inspiron B130. Networking works, WiFi fails. Has a Broadcom 4401-B0. Network applet shows WiFi greyed out, just like it did in the LiveUSB boot. lspci reports: ...
0
votes
0answers
46 views

problem with airmon-ng start waln0

I'm new in Kali Linux, I have a USB wireless adapter, Realtek RTL8187 wireless802.11b my command airmon-ng it shows the waln0, but when I type the command airmon-ng start waln0. It doesn't show ...
2
votes
1answer
58 views

Getting a list of WiFi networks nearby when the adapter is in AP mode

I am trying to get a list of wireless networks nearby while the adapter is acting as an access point but iwlist returns the following error: $ sudo iwlist wlan0 scan wlan0 Interface doesn't ...
0
votes
0answers
143 views

Intel wireless 7260 card is slow; eventually hangs and is unable to reconnect

I have fresh install of Debian Jessie. My WiFi controller is Intel Corporation Wireless 7260 (rev 73). My WiFi works really slowly and after 5-10 minutes it just hangs. It fails to reconnect for some ...
0
votes
0answers
97 views

Arch Linux: Unable to connect to internet post-installation reboot

So I somehow managed to install Arch Linux successfully. At the time of installation, I followed the official guide as well as this guide. During the installation, I had successfully connected to ...
6
votes
1answer
65 views

FreeBSD systat doesn't calculate upload speed/total on wlan0

When I call systat -if shows that wlan0 out traffic/peak/total are 0 kb(/s). I'm using wlan0 for networking, internet down/upload are working. The in traffic/peak/total are OK. The wifi chip is ...
0
votes
0answers
121 views

Wifi card not detected - Archlinux

I've recently installed Archlinux on my Asus N76V Notebook but the system doesn't seem to detect my wifi card. It is not listed in any of the normal detection commands : lspci 00:00.0 Host bridge: ...
0
votes
1answer
142 views

Ho to bridge wlan0 in AP mode and eth0 so that eth0 is static and wlan0 uses DHCP?

I have a router that provides internet access. Connected to this router is a desktop PC that has working eth0 (static IP address) and wlan0. Also connected to the router is a laptop which I use to ...
1
vote
0answers
57 views

Constant prompt for WPA2 password in Fedora

I asked on the Fedora forums but no one responded so I am asking here. I am on Fedora 20 with Gnome 3. My machine is the Dell XPS 13 which has an Intel 7260 rev 6b wireless card. I connect to my ...
3
votes
1answer
326 views

How to send data from serial port over wifi?

I have microcontroller device which reads data from sensors and sends it via Serial to USB converter (ftdi232 cable). This Serial to USB converter is connected to ARMv7 mini-computer - CuBox with ...
1
vote
0answers
95 views

Very weak wireless connection on Debian live image install

I'm having a problem with the wireless connection on a fresh install of Debian 7.4 which I didn't have before, I had Debian installed before and WiFi was working great, the only thing that changed ...
2
votes
1answer
127 views

Automatically run rfkill unblock on startup

I'm running Elementary OS on an old(er) HP Pavilion dm1. Unfortunately, on startup my wireless is hard disabled, and I need to run sudo rfkill unblock all to get it up and running. Works fine once I ...
0
votes
0answers
130 views

iw not detecting my usb Wifi card

I am using iw list command to determine whether my usb Wifi stick is supported by hostapd to create a Wifi hotspot or not. But iw seems not recognizing it. Here is the output of iwconfig:- ...
2
votes
0answers
52 views

While connecting to hidden SSID, Supplicant PAE state=HELD

Here details of my Wireless network hidden SSID (non-broadcast) The authentication protocol used is PEAP, which is a username and password protocol. The username and password are passed between the ...
2
votes
0answers
37 views

How to check whether a usb Wifi supports Hotspot or not

I found a wifi card here:- Wifi Now, how can I check whether It can enter master mode and have support for hotspot? As my current in-built Wifi card is giving me this:- Error for wireless request ...
0
votes
1answer
304 views

Cannot connect to WIFI

I finally made the switch from windows to Linux. CentOS to be precise. Unfortunately, I am unable to have my wireless connection working, so accessing the web is a hassle. Following directions on the ...
0
votes
0answers
23 views

Networksetup, how do I make an IF loop for error on connection?

I'm attempting to connect to a network in Mac OSX with this command: networksetup -setairportnetwork eno "NETWORK_NAME" and can most often connect to the network. But I need to make an IF loop for ...
1
vote
0answers
131 views

iw fails to configure interface

I have two PCs: Ubuntu 12.04.4, 3.5.0-45-generic (let's call it "myGoodPC") Ubuntu 12.04.3, 3.8.0-35-generic (let's call it "myBadPC") myBadPC operates in a virtual machine of ESXi 5.0.0. In ...
1
vote
0answers
113 views

Unable to change bitrate on wifi adapter

I'm having issues with my Belkin N-300 USB wifi adapter. I can connect fine, but about a week ago the connection started getting very slow and regularly drops. Bringing the interface down and back up ...
0
votes
1answer
810 views

Setting up hostapd with a iwlwifi device to run a hotspot

I am trying to configure my opensuse 13.1 system to function as a hotspot (on my dell xps13 computer). So I tried setting up hostapd as explained here, but I get an error: hostapd ...
0
votes
0answers
347 views

WiFi not working in Backtrack 5r3 Acer Aspire V3-571 Laptop having “Broadcom Corporation NetLink BCM57785 Gigabit Ether” integrated wireless card

I have installed backtrack 5r3 in one hard disk partition alongside with windows7 in another partition in Acer Aspire V3-571 laptop having "Broadcom Corporation NetLink BCM57785 Gigabit Ether" ...
0
votes
1answer
35 views

How to connect to wifi on a Gnome 2.24.1 system?

A friend gave me an old laptop running Gnome 2.24.1. It's been in storage for years but seems to run fine, albeit with this old OS. Now, I don't know too much about Linux, but I'd like to set it up ...
0
votes
1answer
48 views

Using WiFi port as redundant link

I want to use WiFi port of my server as redundant link for copper connection to my home DSL router. My router if SAGEM 2704 with very limited functionality. So practically the only possibility is to ...
1
vote
2answers
507 views

Error compiling drivers for Ralink RT2870

Im trying to install drivers for a rosewill RNX-N600UBE wireless card (Ralink RT2870 chipset) on Kali Linux. I downloaded the drivers form their website and unpacked/unzipped them, but now when i try ...
0
votes
0answers
24 views

How can I bind together several wifi adapters into one internet connection?

I would like to get around an unnecessary and extremely tight (20k) speed cap per wifi client on a wifi network providing internet. Each client passes through a captive portal that requires just ...
1
vote
1answer
110 views

iw: what's the default channel bandwidth?

I'm using the iw tool to configure a WiFi interface to sniff the air (monitor mode) on specific channel: ifconfig wlan0 down iw dev wlan0 set channel 1 iwconfig wlan0 mode monitor ifconfig wlan0 up ...
1
vote
2answers
126 views

Retrieve value of RTS threshold without iwconfig

Is there a way in OpenWrt to read the current value of the RTS threshold for a specific interface without installing iwconfig? What I'm looking for is the value of RTS thr that can be found in the ...
0
votes
2answers
32 views

wpa_supplicant ignore some networks

I am using wpa_supplicant and would like to add a rule so that my machine connects to any open network. I can do this with: network={ key_mgmt=NONE } Now I would like to blacklist some ...
0
votes
0answers
57 views

Wireless driver issue slowing and sometimes freezing pc on start up

Can anyone tell me how to remove this start up error message or fix it? lspci: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Currently ...
0
votes
0answers
136 views

No wireless interface detected in Linux

I'm using Backtrack5R3 via bootable CD and getting no wireless interface found output. These are the o/p of commands by which you can get details of my problem. My laptop model is Lenovo b490(20205). ...
0
votes
0answers
240 views

Why does my USB device not get recognized by Ubuntu?

I seem to have a problem that no else appears to have encountered before (at least a couple of hours Googling has shown this to be the case). I am running Ubuntu 12.04. I plug in the device (Linksys ...
1
vote
1answer
384 views

Install Edimax EW-7612UAn wireless on CentOS 6.5

Does anyone know how to install the driver for Edimax EW-7612UAn on CentOS 6.5? I've tried to install it on Ubuntu, but I never gotten it to work. EDIT: Here is an attempt building a downloaded ...
0
votes
0answers
29 views

Can slattach control a serial WiFi device?

I have a Wi-Fi device which is driven by AT commands over a USB-Serial connection. I am able to successfully make a serial connection to the device and set the SSID, PSK, obtain an IP address, and do ...