1
vote
1answer
28 views

Cannot connect to WPA2, but connecting to WEP is fine

I'm trying to set up a connection to a WPA2-Personal network on a barebones Debian install. I've installed the firmware for my wireless adapter just fine (ipw2200) and can connect to open wireless ...
1
vote
2answers
36 views

wpa_supplicant issue

We are using wpa_supplicant utility v2.2 for Wlan. Below is the configuration for the router: Mode: WEP Password: 12345678 Mode: WPA Password: 1122334455 The router's current mode is WEP and we ...
3
votes
2answers
177 views

WiFi not working after restoring from hibernation (authentication times out)

My Intel 6205 wireless network card does not work after hibernating. It sometimes also does not work on boot, failing in the same way. Occasionally, it also stops working after ~10 minutes of ...
0
votes
1answer
59 views

connecting to a wifi using wpa_supplicant

I have some problems connecting to my WiFi (WPA2, standard settings) using wpa_supplicant. My /etc/wpa_supplicant.conf is as follows: network={ ssid="MYWIFI" psk=******** } then my ...
2
votes
0answers
54 views

While connecting to hidden SSID, Supplicant PAE state=HELD

Here details of my Wireless network hidden SSID (non-broadcast) The authentication protocol used is PEAP, which is a username and password protocol. The username and password are passed between the ...
0
votes
2answers
33 views

wpa_supplicant ignore some networks

I am using wpa_supplicant and would like to add a rule so that my machine connects to any open network. I can do this with: network={ key_mgmt=NONE } Now I would like to blacklist some ...
4
votes
2answers
410 views

How do I authenticate to a wireless provider's “open” network without using a browser?

This sort of a setup seems to be common in shopping malls and airports. In Western Canada Shaw provides such a service and calls it "Shaw Open". I'm pretty sure other locales have similar services ...
0
votes
1answer
187 views

wpa_supplicant and signal strength

I use wpa_supplicant to handle a connection to specific SSID. I added the wpa_supplicant to default runlevel in order to start it at the boot time. I have this question however; Is it any program, ...
1
vote
2answers
2k views

WiFi error wpa_supplicant

I have a problem with the wpa_supplicant program. My problem is about the use of wpa_cli which needs wpa_supplicant. Error when I'm executing sudo wpa_cli: Could not connect to wpa_supplicant The ...
3
votes
0answers
220 views

Wifi on Fedora trouble

My university's WiFi is particularly unfriendly to Linux, and the only way to make WiFi work is to repeatedly "forget" the network settings for the student network, re-enter all the data about the ...
3
votes
1answer
186 views

wpa_supplicant: connect to WLAN in the background (during boot)

I am using manual configuration to connect to my WLAN. In my wpa_supplicant.conf, I have something like this: network={ ssid="mywifi" key_management=WPA-EAP ... } and then, in my ...
0
votes
0answers
355 views

BAMT wireless connection no DHCPOFFERS received

I have managed to get my Edimax EW-7811Un wireless adapter registered and the correct driver installed, but need some help getting it connected to my WPA2 PSK network. root@bamt-miner:/home/user# ...
1
vote
3answers
9k views

How to connect to Wi-Fi network in Arch Linux?

tl;dr After reading the Arch wiki articles on installation, wireless setup and WPA supplicant, trying the suggestions below and a host of forum threads, I'm unable to get either of the following cards ...
2
votes
2answers
923 views

“wpa supplicant: No network configuration found for current AP” - carl9170-driven wifi adapter glitching on Debian 7

I've got a Debian 7 machine with Linux3.2 kernel and a USB wifi adapter with Atheros chipset (D-Link DWA-16 Xtreme N Dual Band), which in theory should work. Indeed, I managed to establish a wifi ...
1
vote
0answers
263 views

wpa_supplicant connection issue: iw dev wlan1 link shows connection, but network unreachable

I've been testing a Wifi card in my machine and I can't seem to get it to connect to my home router. The card is a ralink rt37, I compiled the modules that I needed into the kernel and downloaded a ...
2
votes
2answers
411 views

Store password as hash in wpa_supplicant.conf? [duplicate]

This question is very much related to this one. I want to log into a user and password protected wifi which uses PEAP and maybe MS-CHAPv2. My wpa_supplicant.conf has to contain an entry like this: ...
1
vote
1answer
559 views

How to prevent wpa_supplicant from connecting to a network

How can I persistently prevent a wireless interface using wpa_supplicant in roaming mode from connecting to a particular open network foo? This doesn't work: $ sudo wpa_cli > blacklist ...
5
votes
1answer
552 views

How to confirm/verify WiFi is WPA2?

How do I, from the command line, confirm on the host that the wireless network connection uses WPA2? The wireless router is set to use WPA2 Personal (WPA2 with a pre-shared key) and AES on the ...
1
vote
2answers
583 views

Problem with WPA connection on OpenBSD

I have an OpenBSD 5.3 amd64 installed and Intel WiFi Link 1000 card which works with WEP but I obtain a strange message with WPA keys: # sh /etc/netstart iwn0 iwn0: no link ............. sleeping ...
2
votes
1answer
534 views

wpa_supplicant store password as hash (WPA-EAP with phase2=“auth=PAP”)

Is there a way to store my password in /etc/wpa_supplicant/wpa_supplicant.conf as some hash instead of plaintext? By "password" I refer here to the password used for phase2 authentification. I do not ...
3
votes
1answer
2k views

Connect to hidden Wifi AP with wpa-supplicant?

I have a headless Debian machine, with a Wifi dongle connected. I used to hide the Wifi AP, but now I can't. If I unhide it, some lines in the /etc/network/interfaces will allow me to connect: auto ...
2
votes
0answers
240 views

Can I configure specified PEAP in network-manager

Here's the wpa_supplicant.conf file: ap_scan=1 network={ ssid="<SSID Name>" proto=WPA2 key_mgmt=WPA-EAP pairwise=CCMP group=CCMP eap=PEAP phase1="peaplabel=0" ...
4
votes
1answer
864 views

Can I spoof the MAC address in Android?

Is it possible to spoof the MAC address of the wireless interface using wpa_supplicant.conf in Android when I connect as a client to an access point? Edit Unfortunately, Android doesn't support ...
3
votes
0answers
539 views

WPA pre-shared key format in linux and macintosh

I'm temporarily in a situation where the wifi network I need to use is implemented using Macintosh equipment. They have encoded their network using WPA and TKIP. I can't seem to get onto their network ...
2
votes
1answer
680 views

Getting wireless card to work in Debian with wpa_supplicant

I'm having difficulty getting a Netgear WG311 network card to work with Debian. Here is a screenshot showing ifconfig wlan0, iwconfig, network interface cards, and wpa_supplicant configs: I ...
1
vote
1answer
484 views

Unexplained Log Cruft and Possible Dropped Packets on WPA2-Personal LAN

I've been receiving a LOT of log cruft ever since I installed my Linksys Rangeplus USB WUSB100v2 (using the rt2870sta community driver from the Linux kernel) and was wondering what it all meant. Many ...
5
votes
2answers
2k views

Use wpa_supplicant without plain text passwords

I'm running gentoo on my laptop, and I'm currently using wpa_supplicant to handle wifi. My configuration works and I can connect, but it is required to type in the plain text password into the ...