The term web server can refer to either the hardware (the computer) or the software (the computer application) that helps to deliver web content that can be accessed through the Internet.

learn more… | top users | synonyms

6
votes
3answers
363 views

Why are web servers traditionally started as superuser?

Thinking about a future web server setup, it struck me that for some reason web servers usually start as root and then drop certain rights (setuid) for the worker processes. In addition there is often ...
1
vote
0answers
20 views

Renaming public_html for main domain to subdomain which is development website

In CPanel I created a subdomain test.mydomain.com under my main domain mydomain.com. Both domains have magento websites. The contents of mydomain.com are stored in public_html and the contents of ...
0
votes
0answers
14 views

configuration of apache on sunfire v880 runing solaris 10

I am runing SunOS 5.10 on Sunfire v880 for my project but I can't run the Apache which is already installed. I have tried svcadm enable apache but it says that apache is not a known service. How do I ...
0
votes
1answer
26 views

Apache fails to reload… Is there a log that I can look in for details?

I have a webserver that I'm working on adding a site to. After running a2ensite, I ran service apache2 reload, and got this: [FAIL] Reloading web server config: apache2 failed! Is there a log ...
1
vote
1answer
44 views

Security for a web server for multiple people?

I have an apache web server set up where multiple people have their websites hosted, mostly php based websites. The problem is, when these people upload their website files, it has read permissions ...
1
vote
1answer
32 views

Is there a selinux, httpd, or PHP configuration that prevents reading mounted drives?

I'm moving a virtualized centos web server over that has an all-to-small hard drive to a new machine and I hooked up a bigger drive for hosting videos and downloads and stuff. W When I try to run a ...
0
votes
0answers
25 views

Unable to access page with https

I have configured https on my server with apache2 which is in cloud. The below Listen directives are enabled in it. Listen 80 Listen 443 The port 80 is firewalled in cloud. So I used port 443 to ...
0
votes
0answers
22 views

How do I deploy Node on my domain

I have a remote dedicated Centos machine that uses cPanel and WHM. I know how to use ssh also. I just want to know how I can map my domain to node. I need to know where I put my server.js file, etc. ...
1
vote
1answer
105 views

How to redirect HTTP request to different local web servers

I have a Linux machine and some applications are running web interfaces. I'd like to create a web server, opened to the Internet, in order to access these local web interfaces (or web interface on ...
0
votes
1answer
37 views

Do I need a support contract to test my web application on solaris 10

I need to install Solaris 10 and I'm wondering if I need a support contract, on the download page it says that you need a support contract for production use, but I'm not too sure what production use ...
0
votes
2answers
46 views

My /var/www directory is full

I am using Debian 7 on VirutalBox as my virtual web server. Now, my /var/www directory is almost full. I added 27 GB of space to my VM as a new partition, formatted the partition with ext4 but my ...
1
vote
1answer
61 views

Web server seems to keep serving old images, issue with Apache & VirtualBox?

I'm asking this here because I'm pretty sure it's a Linux issue. I'm running Apache server locally on Ubuntu Server 12.10, which runs inside a virtual machine (VirtualBox) on Windows 7. The "www" ...
1
vote
1answer
25 views

Redirection to services in NAT or Bridged Network only with one subdomain

I have one subdomain (dyndns). xyz.dyndns.com (f.e.) Here my question begins: I have a server for virtualisation. On the server I have multiple VMs where different web-services are available ...
1
vote
1answer
83 views

How to properly setup web server directory permissions

I'm lost with this, hopefully I can find some help here: I have Ubuntu 12.04 LTS webserver. For example I have user "myuser". There is a public directory which is my web root. I chowned it and all ...
2
votes
4answers
76 views

Keeping my production webserver updated

I have a production webserver (CentOS 6.5) and I just wanted to know how do I keep this updated interms of security updates and stable. For example, is it safe interms of not breaking anything on the ...
0
votes
1answer
20 views

Help with directory ownership/permissions for apache

I've been using Ubuntu Linux for a couple years now but I still have trouble with permissions. I need to setup my web server for production. The root web directory should always be accessible by ...
0
votes
1answer
30 views

Restricting web application access to selected machines

I want to host a web based OpenERP application in a VPS Ubuntu 12.04 OS application. Can I restrict the application access to only assigned machines? In other words, I have 2 offices, and I need to ...
1
vote
2answers
109 views

How to “listen” to nginx writes to a file socket

I'm trying to get uwsgi and nginx to play nice. After moving to "file sockets" (hopefully I'm using the right terminology here) from TCP sockets, the only thing I get from uwsgi is a 400 with no ...
2
votes
1answer
136 views

How to properly setup user/groups/permissions for a web server?

I spent all day figuring this out, but without success, so hopefully I can get some help here: I have Ubuntu 13.10 VPS server with nginx, PHP 5 and MariaDB installed. I created custom system user ...
0
votes
2answers
126 views

Connecting to localhost via system IP address

I am using Linux Mint 15, and I am running a Ruby web server(Thin) on port 3000. I can connect from my machine via localhost:3000, but the moment I type in the system IP address (eg. ...
0
votes
0answers
56 views

Capacities on Load-balancer & Web Servers? Bandwidth + Performance

I'm on DigitalOcean and I have a very simple scenario for my website. Now having 3000 concurrent hits every minutes. (For example) Currently it is directly on 1 only single Apache Server. The ...
1
vote
1answer
35 views

Network issue - only one machine can't access webpage on another machine

I'm trying to figure out why my MacBook is unable to reach the web page served by my Raspberry Pi while other computers on my local network (or on external networks) have no problems seeing the web ...
0
votes
1answer
82 views

configure web server in RHEL

I have installed Request tracker in my RHEL 5.6 system. The RT installation succeeded and I have also installed apache web server, mysql, phpmyadmin that is required for running the request tracker ...
0
votes
1answer
34 views

set up a proxy in nginx

I'm using amazon cloud. I have configured LB with SSL certificates and LB's port 443 is pointing to 80 to the instance. Nginx is running on instance on port 80. I have configured nginx like if some ...
1
vote
1answer
73 views

Running Apache with Tomcat

I was wondering if it's possible to run a Tomcat server within Apache whilst also running PHP servers under other virtual host instances? And if so, how is this done? Basically, I'm trying to run an ...
0
votes
0answers
36 views

LAMP WordPress site returning 404s

CentOS 6.4 64-bit Apache 2.4.6 PHP-FPM 5.5.4 Homepage from root loads fine http://csillamvilag.com But all other pages return 404 (CMS is WordPress). I am also able to access and log into WordPress ...
2
votes
1answer
72 views

How to copy a public key to your server

I was trying to figure out how to add a new SSH key to my amazon server - I found this question and answer How do you copy the public key to a ssh-server? However I am so new to Linux/Unix and I ...
1
vote
1answer
88 views

Linux fedora - httpd package and router, how to make it work?

I installed HTTPD package to setup private web server in my house on one of the computers. The server is up and running, but I can't access the server from outside by using my external IP address. I ...
3
votes
4answers
512 views

How can I improve nscd's cache hit rate?

My Goal: Let nscd maintain a fairly large DNS cache in excess memory since I have it available. Description: I have a webserver that has a broadly dispersed but high-repeat user base. It has plenty ...
0
votes
1answer
237 views

How to grep top most frequent error messages in a unix logfile

If I have a file example apache log file How to extract the top most frequent error messages in a unix log file with no timestamps the key is most frequent error message should come on top of the ...
0
votes
2answers
80 views

Linux Distrib with build in Web filter solution

Is there any distribution with a built in solution for web content filtering for my network?
0
votes
1answer
38 views

New Server: What things to take care of when setting up a webserver to host multiple websites?

I am setting up my first webserver. On this machine, I want to run a couple of websites. Let xyz.com and abc.com and they will not be on seperate virtual machines. I have a few queries: What should ...
4
votes
2answers
350 views

Real-World Use of TCP_DEFER_ACCEPT?

I was perusing the Apache httpd manual online and came across a directive for enabling this. Found a description in the man page for tcp: TCP_DEFER_ACCEPT (since Linux 2.4) Allow a ...
3
votes
1answer
78 views

New webserver: What all user accounts should I create and permissions to provide for

This is a followup on my question here. I am setting up the first webserver and am fumbling with what user accounts to create and permissions to provide for better security. Below is what I have. ...
3
votes
1answer
393 views

PID file not accessible after update of nginx

After I removed the version 0.7.x which was delivered by the Debian standard packages, I installed the version 1.4.1 of nginx by source. It is possible to start nginx with service nginx start and I ...
1
vote
0answers
73 views

Why does my CMS run extremely slow in my workstation (Ubuntu)

For over a year I have been struggling with the response speed on my Drupal v7.2x CMS install. Let me explain. I'm running Drupal 7.2x on an Ubuntu 12.10 (upgrade to 13.xx pending) for the purpose of ...
3
votes
1answer
145 views

Apache Request Hangs For 2 Minutes Exactly

I am experiencing some odd behavior with apache. I have requests that are hanging for exactly two minutes. The request could be one file one time, and then a completely different file another time. ...
0
votes
1answer
738 views

xampp fail to start, apache running, but apache is not installed!

I am having a strange problem. When I try to start xampp it fails with message: XAMPP: Another web server daemon is already running. When I tried to find out which server is running using ...
0
votes
2answers
110 views

Low-RAM Linux Distro Specifically for serving static sites [closed]

I'm looking for a near-zero-configuration linux distro that is designed specifically for serving static web sites and nothing else on a low-RAM machine (I'm planning on 128MB, but the option of less ...
1
vote
1answer
56 views

visit a website with multiple domains on the same server using the IP address

I've a web server hosting multiple domains, user webmin and virtualmin. How can I view the website for example www.abc.com by IP address? As I remember, something like user mode of Apache can view the ...
0
votes
0answers
630 views

mod-mono-server 4 is not working, while 2 does

I need to deploy an ASP.NET MVC4 (MVC3 at least) application on Centos 6 server. I've installed Mono 3.2.1, XSP4, mod_mono (for use with apache web server) and succesfully ran the test application ...
0
votes
1answer
235 views

How to run a shell command in a server?

I am fairly familiar with computers and web stuff but this is a bit out of my comfort zone. I have a shell script (.sh file) I want to run in a Linux server I have one site hosted (the script is a ...
2
votes
1answer
45 views

Persistent script to check if my webserver work with low budget vps?

I have a low budget vps and they constantly change a lot and my webserver is often unable to reach. Is there a shell script that is persistent and can check my webserver is running and if not make it ...
2
votes
1answer
1k views

Configure Glassfish http-listener to Port 443/ 80

I want to configure the http-listeners in Glassfish 3.1.2.2 Build 5 under Linux. I changed the settings for the http-listener-1 to the port 80 and the settings for the http-listener-2 to the port 443. ...
0
votes
1answer
44 views

Linux development server [closed]

I have an issue. I want to set up a Linux development server on my home PC so everyone who has credentials can log in from anywhere into that machine and write code. What should I do or what should I ...
1
vote
1answer
43 views

FreeBSD: Put Server Files on Its Own Partition/Slice

When installing FreeBSD v9, can I specify that a particular partition/slice have /var/www/ as a mount point?
0
votes
1answer
1k views

What's the approximate percentage of Linux servers in the world? [closed]

I did so many searches on search engines, but could not find a relevant solution. Is there any research or source that shows an approximate value for servers?
0
votes
0answers
45 views

error_page and error_log in same config file on nginx

Can we keep error_log and error_page directives in a same config file for nginx ? When I keep both in the same config file for same server container, it throws error something like this 2013/07/31 ...
6
votes
2answers
182 views

With which user should I run web servers, redis & mongodb?

On this VPS there are three users: root, another_one, nobody. All webserver files, configs, &c. are owned by root. However, I'm in doubt for what regards running things. If I use root for the web ...
3
votes
2answers
1k views

How to install Cherokee web server on Debian Wheezy?

I'm trying to install Cherokee webserver on Debian Wheezy. All the docs and websites that I've visited suggest that apt-get install cherokee will do it, but when I do that, I see: $ apt-get install ...