VSFTPD ("Very Secure FTP Daemon") is an FTP server for Unix-like systems, including Linux.

learn more… | top users | synonyms

0
votes
0answers
20 views

file permissions is getting differed with the umask value while using sftp

I have set up the jail rooted sftp environment on port 222 with umask 0002. I have created the jail rooted user whose home directory is on nfs mount point. When I have tried to upload the files , I ...
0
votes
0answers
24 views

Creating a manual delay (30 seconds) on server side (VSFTPD ) - while a bash client sends to it some files using curl

I have created a shell script in ubuntu that connects to a vsftp server using curl and transfer some files. In my testing 3 files and each file will take 0.3 seconds to get transferred (very fast to ...
0
votes
0answers
8 views

vsftp and folder permissions weird behavour

I have setup an ftp server on a Centos6 machine using vsftpd. This service runs on a virtual box machine just for testing-demo purposes. My setup allows anonymous connections to the ftp server with ...
0
votes
0answers
17 views

VSFTPD and ability to write to root

I successfully implemented VSFTPD on CentOS 7, however I would like to know if it is possible to write to the root. Here is a fragment of my VSFTPD configuration file. [root@Turbo media]# vi ...
0
votes
0answers
66 views

500 OOPS: chroot on vsftpd login

I'm aware this question has been asked a lot in the past, but my problem seems to be a bit different. I'm using vsftpd on my CentOS 7 server and I have specified chroot_local_user to YES in ...
0
votes
1answer
52 views

Directory Contents Not Listed When Connecting To CentOS 7 VSFTPD

OS: CentOS 7 with VSFTPD with firewall turned off for the moment Client: Filezilla VSFTPD Configuration Settings: Used [root@Turbo ~]# vi /etc/vsftpd/vsftpd.conf anonymous_enable=NO ...
0
votes
0answers
33 views

Setting up a VSFTPD Server and Client

I have created two VM running Ubuntu 12.04, I am trying to set one up as a server and another as a client. I have installed vsftpd using sudo apt-get install vsftpd and then I changed my config file ...
1
vote
1answer
31 views

vsftp doesn't respect chmod setting when uploading outside my local network

Yo! I've a ftp server on my linux machine and I've set the following rules: I keep group and owner and chmod it to 775. When I use it at home (192.168.x.x) it's ok, files keep their group and user ...
-1
votes
1answer
39 views

vsftpd, 553 Could not create file. How do I chown two different users?

I'm new to linux, but I'm learning! I'm running CentOS 6.7 with nginx and I'm trying to get vsftpd to work. I can log in via FTP okay, but when I try to write a file, I get an "553 Could not create ...
2
votes
1answer
17 views

(vsftpd) uploaded file group

I'm creating an ftp server with vsftpd, and I've almost finished, the only thing remaining is when I upload a file (logged as an user U), the file belongs to a group which has the same name (so group ...
1
vote
2answers
39 views

Is it Safe to open port 35000:40000 for FTP data connections

I recently got hacked so im being careful when changing the settings in my CentOS 7 iptables. I just opened ports 35000 to 40000 for FTP PASV connection, will this represent any security risks?
0
votes
0answers
41 views

500 OOPS: priv_sock_get_cmd - Interoperability failure

When i give 1 user named gja allow acces to my vsftpd setup i get this error when i want to connect: 500 OOPS: priv_sock_get_cmd - Interoperability failure But when i turn that one user thing off it ...
0
votes
0answers
16 views

vsFTPd cannot directory listing

Hey guys This problem really messed me up. I'm using LFS 7.7 OS and linux 3.19 compiled from source. FTP can be login perfectly but cannot list the diretory or file. Can anyone help? vsftpd.conf ...
1
vote
4answers
220 views

All files are not getting downloaded by SFTP script

I have a sftp file script with below details,my server folder like BCP11,BCP12,BCP13,BCP14.....BCPXX. In which BCPDUMP folder have files. Filename : file_sftp.sh #!/usr/bin/expect spawn sftp ...
0
votes
0answers
168 views

vsftpd 2.2.2 - 500 OOPS: priv_sock_get_cmd

I'm very new to Linux, and I'm currently experimenting with it and several services in order to familiarize myself to it. I've installed vsftpd to access the machine over ftp however I'm getting the ...
1
vote
1answer
40 views

ftp user for root directories? [closed]

I am setting up my Ubuntu 14.04 server. I want to have an FTP access (I use vsftpd), mainly for my apache2 server, so I added a new user to the www-data group. I also set up the settings for ...
0
votes
0answers
45 views

Creating a new user for FTP with access to a specific dir

After following all of the instructions found here: How to create a FTP user with specific /dir/ access only on a Centos / linux installation I am having some troubles. For some reasons the new ...
1
vote
1answer
106 views

NFS + SFTP on the same directory - are there any pitfalls?

I currently have an SFTP (actually vsftpd) server I use for regular archives. The OS is Centos 7.0. While I used to use SFTP, I still could benefit from having an NFS connection to this server (rw). ...
1
vote
1answer
77 views

vsftpd: use Explicit SSL in a different port than unencrypted FTP

I've managed to run vsftpd with unencrypted FTP, Implicit SSL, and Explicit SSL. What I'm looking for is a way to run it with Explicit SSL, but have a separate port for SSL. For example: port 15000 ...
0
votes
1answer
23 views

vsftpd and filezilla

I'm new to linux. I've installed vsftpd and filezilla locally on my pc(ubuntu 12.04) I can enter ftp via filezilla using 0.0.0.0 and it works. How can i access to ftp from outside of my computer? ...
1
vote
0answers
17 views

Restrict all FTP Accounts to a single directory [duplicate]

I am trying to restrict all FTP users to the directory /jannik with the vsftp-daemon. I don't want them to go anywhere but the folder /jannik and it's sub-folders. Also, I don't want them to have ...
0
votes
0answers
89 views

another problem “oops 500 cannot change directory” vsftpd server

I have the same problem as discussed here: What are the settings to correct vsftpd "500 OOPS: cannot change directory" error? but setsebool commands are not recognized in my OS, I am ...
0
votes
0answers
78 views

VSFTP user login & activity monitoring

We have a linux box that is configured with vsftp for our ftp sessions. Unfortunately, for the last few days, we've found that files served by vsftpd have been lost (deleted). I would like to know: ...
-2
votes
1answer
70 views

How to Upload To vsftpd default dir with scp

I have been working on uploading from shell and I need to upload from shell I found scp in openssh-client . and it work perfectly but in this command I have to set destination path in ftp server like ...
-1
votes
1answer
51 views

Vsftp too much time for login [closed]

While I'm trying to connect my new Vsftpd server using ftp client. The user authentication passed quit speedy but next steps lag too much. Please help me to speedup my Vsftpd server.
0
votes
1answer
244 views

SSH login too slow in Centos 6.6 [closed]

SSH login take too much time in my CentOS machine, and also a ftp server is running on it. Please help me to speedup the login time for both root and ftp user. I tried some tricks but no ...
0
votes
1answer
403 views

Right permissions FTP server

I need create a FTP server to upload files directly to apache directory. I have create user with: useradd -G wheel,apache newuser and set password with passwd newuser I have changed home directory ...
0
votes
1answer
2k views

Unable to start vsftpd service on CentOS 6.6

I have installed vsftpd ftp server on CentOS 6.6 with yum, But I can't start vsftpd service. When I run /etc/init.d/vsftpd start, I get Starting vsftpd for vsftpd: [FAILED] with no ...
0
votes
1answer
117 views

vsftpd is failing in Debian Wheezy [closed]

I have just setup vsftpd and unable to start the server. I have tried to change the listen parameter from yes to no, but without any difference. Most guides mention xinetd or inetd, but there are no ...
0
votes
0answers
12 views

Configure a VSFTP User to have Access to /var/www Directory Centos 7 [duplicate]

How do I go about configuring VSFTP to have access to the web root folder in my LAMP Centos 7 server? I cannot seem to have anything displayed in the var directory. Thank you!!
0
votes
0answers
63 views

OpenLDAP and vsftpd default directory

We are hosting a cluster of VMs all incorporating OpenLDAP. I came on after the server was setup, and the original sysadmin set a single FTP LDAP username for everyone inside and outside the ...
0
votes
0answers
147 views

VSFTPD slow speeds compared to NAS

I am running linux server with vsftpd server as ftp server. My LAN network is a gigabit one. However when i download from my ftp server i cannot pass 11.1-11.2mb/s but on my NAS server i can get up to ...
0
votes
0answers
285 views

vsftpd conditional pasv_address (internal ip vs. external ip)

I have a vsftpd server setup that i'd like to be able to access with passive transfer from an external ip (use of my domain name) and also from my local network (192.168.1.x). Currently I have ...
0
votes
0answers
159 views

Help with vsftpd and sftp

Is it possible to sftp setup that is more flexible then the ssh internal ftp server? I have been tasked with providing an /srv/ftp/ directory which includes mount -bind other_directory1 /srv/ftp/d1 ...
1
vote
1answer
130 views

FTP user creates file that are not executable by apache

I am facing a little issue: I have created an FTP server with vsftp and a web server with Apache 2.2. Now, my goal is to make so that anyone can log into the machine via FTP and upload files (.html, ...
0
votes
2answers
313 views

vsftpd: pam_userdb permission denied

I've been trying to set up VSFTPD on Centos 6.6 to allow virtual users. Below is my vsftpd.conf, which is configured to allow only virtual users in /etc/vsftpd/vsftpd-virtual-user.db. listen=YES ...
1
vote
2answers
85 views

SFTP server without root as owner of the user's folder?

I installed a SFTP server with SSH. But the chroot directory must be owned by root, then the user can't write on it. Is there any way to allow that user to write in its root directory? Thanks in ...
1
vote
2answers
179 views

FTP straight to directory, rather than making it relative to FTP users home directory?

I've set up an FTP server using vsftpd on a Centos 5.10 machine. This is my target directory on the server: /var/www/supercoolstuff I can connect from a Windows XP machine using WinSCP then ...
1
vote
2answers
4k views

Installing vsftpd - 500 OOPS: could not bind listening IPv4 socket?

I have to set up a FTP server on my machine. I have installed vsftpd using the command: sudo apt-get install vsftpd I then edited the configuration file vsftpd.conf in the location /etc. The file ...
1
vote
0answers
85 views

VSFTPD cutted uploads

Installed VSFTPD v2.3.2 on a Wheezy. When I try to put anything my ftp client (filezilla v3.5.3) it sends the file by parts of 229376 bytes interrupted by deconnexion/reconnexion untill the en of the ...
1
vote
2answers
36 views

FTP and WWW services don't acknowledge connections

I have Lubuntu 14.04 LTS with vsftpd and the lamp stack (apache2, etc.) installed. Everything works fine on the LAN. Externally, the services don't acknowledge connection attempts. I can see packets ...
0
votes
1answer
142 views

Ubuntu Server 12.04 vsftpd timeout using external IP

I am having a problem connecting to my Ubuntu 12.04 server with vsftpd using my external IP. Connecting with local IP is successful. I am using FileZilla for the ftp client. I know there is a bunch of ...
0
votes
1answer
255 views

Unable to delete files via FTP?

I have a couple of FTP users who can access my (pseudo) server running vsftpd under Mint Linux. They are restricted to a specific directory and below via chroot(). Whilst they can access the files ...
2
votes
1answer
396 views

dyanamically creating directories with pam_mkhomedir and mysql for vsftpd

I'm a Linux noob, so hopefully someone will be able to help me to get this up and running. I've installed vsftpd using the following instructions ...
0
votes
2answers
234 views

Setting up a script on an AMI box to create directories - vsftpd, pam, mysql

I'd like to first say I'm a noob when it comes to linux, so please excuse my confusion. I'm trying to setup vsftpd on a amazon ami 64 bit box, free tier micro. Following these instructions, ...
1
vote
1answer
2k views

vsftpd wont start

I have Rapsberry Pi B+ with Arch Linux installation. uname reports version: [computer@computer001 ~]$ uname -a Linux computer001 3.18.3-3-ARCH #1 PREEMPT Mon Jan 26 20:10:28 MST 2015 armv6l GNU/Linux ...
1
vote
1answer
177 views

Super-slow LAN speed, unless downloading through Chrome's FTP client [closed]

I have connected 2 PCs using ethernet cable and set up FTP on one of them to transfer some >100GB of files. However, trying to download it, I run into a problem of speed not more than 50kB/s. It ...
0
votes
1answer
399 views

Using 'lftp' as a FTPS (not SFTP) client on SuSE Linux ES 11

I have to configure lftp as a FTPS client to be used on a system with SuSe Linux Enterprise Server 11 SP1 installed on it. For that, I have downloaded lftp-4.6.1 and executed following command in ...
2
votes
1answer
629 views

Set group ownership on FTP upload via an ACL

I am interested in setting an ACL which will chown all the files I upload through FTP to the www-data group. However, after performing chown -R user:www-data /var/www/website.com/public_html/ ...
1
vote
1answer
35 views

File permissions on uploaded files

This is hopefully a simple question. I have a VPS set up running LAMP and accepting FTP connections. the only problem with my setup at the moment seems to be that apache is denied access to uploaded ...