Udev is a Linux process that manages device file entries under /dev

learn more… | top users | synonyms

0
votes
1answer
51 views

Why do I get mail when I unplug my adapter?

Usually I only get the terminal output You have new mail in /var/mail/$USER after running certain upgrades but I've started getting it every couple days after running other commands, seemingly at ...
1
vote
1answer
30 views

Pushing changes to driver repos

My understanding of dkms is that its a way to dynamically manage all connected/disconnected device drivers on a Linux system. If that's correct, then I have to imagine that it allows you to configure ...
4
votes
1answer
3k views

What's wrong with this udev rule?

I'm reading through this link in trying to make the appropriate rule to make the BSG device nodes have group ownership of wheel and permissions of 0660. This is the rule that I have: [user@mylinux ~]...
7
votes
2answers
33k views

Cloned Linux system and /etc/udev/rules.d/70-persistent-net.rules

I set up an Ubuntu system and configured it properly, including defining eth0 in /etc/network/interfaces. I then imaged that system and cloned it on a new system. When I booted up the system the ...
0
votes
1answer
87 views

Network card seems to be active but config file is missing?

I have a CentOS 7 virtual machine with an internal network as well as 2 bridged connections, I am unable to find the config file for the third network card. Any ideas where it could be? or what the ...
0
votes
1answer
97 views

many systemd-udevd spawns on embedded device

On my embedded device I observe a lot of systemd-udevd processes. Every few minutes a new systemd-udevd is spawning. At the same time a usb device (GSM Module) gets recognized and disconnect a few ...
2
votes
0answers
105 views

How to know when a device is ready

I have firewire mixing console and I wrote an udev rule which calls a script to set up the whole audio chain (alsa -> pulseaudio -> jackd -> firewire) as soon an the console is switched on. Now I ...
0
votes
1answer
898 views

Run a script that displays an X window from an udev rule

I found several questions on http://unix.stackexchange.com & on http://stackoverflow.com related to launch script by udev rules. But I can't find exact solution or certain answer for executing ...
4
votes
0answers
768 views

udev .rules not running script

I'd like my computer to run certain scripts when a specific keyboard is (1) plugged in, (2) plugged out, (3) detected at startup. Here's the device: [rob@X200 vim]$ lsusb | grep keyb Bus 005 Device ...
4
votes
1answer
1k views

lshw lists my drive but it has no /dev file

Ive just got a dedicated server which has 2x 1TB HDD. However when I type df -h I get the following: [root@sd-56537 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 916G ...
5
votes
1answer
1k views

Difference between /dev and /sys

Exactly what is the difference between devfs and sysfs? Both seem to maintain a list of hardwares attached to the system. Then why the need for 2 separate fs even arose? As far as I can get /sys ...
2
votes
0answers
178 views

What is the difference between HAL and udev? [duplicate]

As far as I understand, if I have 3 different network cards, then HAL will cal each of them eth0, eth1 and eth irrespective of their brands, manufacturerers etc. But it seems to me that udev precisely ...
8
votes
1answer
4k views

USB connect/disconnect notification

I use Linux Mint 13 MATE, and I'm trying to set up notifications when I plug/unplug devices. First of all, I found udev-notify package, but unfortunately it almost doesn't work for me: it works for ...
4
votes
0answers
104 views

Trouble getting USB printer to 'stick' using udevadm

What I’ve got so far $ udevadm info -a -p$(udevadm info --q path -n /dev/usb/lp1) | grep serial ATTRS{serial}=="544336460792090000" /etc/udev/rules.d/50-udev.rules: SUBSYSTEM=="usb", ATTRS{serial}=...
7
votes
5answers
21k views

Ubuntu 13.04 does not recognize USB drive

Using Ubuntu 13.04 (with Gnome 3), my new USB stick (details see dmesg/lsusb) doesn't show up automatically. Situation: The drive does not show up at fdisk -l The drive does appear when running ...
1
vote
1answer
198 views

UDEV Rule Not Triggering

I have gone through 10s of answers on this and other sites trying to debug my udev rule, but to no avail. The rule is very simple: I want to lock my screen when my Yubikey is unplugged. My rule is ...
12
votes
3answers
3k views

Are there alternatives to using `udev`?

While I understand the greatness of udev and appreciate the developers' effort, I was simply wondering if there is an alternative to it. For instance, I might imagine there should be a way to make ...
1
vote
0answers
258 views

udevadm trigger runs only one rule

I have 1294:1320 RISO KAGAKU device on F17. The problem is after sleep/resume hid reclaims this device back and its udev rule is ignored. If I unplug and plug in the device it is OK until next sleep/...
3
votes
1answer
171 views

Udev RUN rule to run touch has no effect

I've created the file bellow $ cat /etc/udev/rules.d/10-tuned.rules SUBSYSTEM=="power_supply", ENV{POWER_SUPPLY_STATUS}=="Charging", RUN+="touch /home/fx/charg" SUBSYSTEM=="power_supply", ENV{...
1
vote
0answers
192 views

/dev/disk/by-id creating wrong symlinks for harddrive

I'm running into an interesting problem where on reboots and power cycles, my harddrives will occasionally be given the wrong symlink in /dev/disk/by-id. For example, when I issue ls /dev/disk/by-id I ...
1
vote
1answer
147 views

arch linux recognizes the partitions and hard disks wrongly

My arch Linux system does not recognize neither the partition nor the hard disk in which it is installed. it is installed on /dev/sdb1 but it recognizes that as /dev/sdc1 and the initialization goes ...
2
votes
1answer
292 views

Get ID and Mounted location of an USB

I need to find a way of retrieving the ID and Mounted Location for USB devices. I've found two commands that gives me what i want, but i haven't find how to associate them.. rsm@matrice:~$ lsusb Bus ...
1
vote
0answers
118 views

System doesn't see HDMI attached tv&receiver until reboot

When my system starts and receiver with tv are disabled during boot, then system will not see them even if later I will replug hdmi cable. To make receiver/tv visible to the system, I must leave them ...
1
vote
2answers
1k views

Arch, Ubuntu: So what's the deal with libudev.so.0?

I'm interested in building Linux desktop apps with Web front-end technologies. Both platforms I've tried -- Chromium Embedded Framework/CEFPython, and Awesomium, seem to have a dependency on libudev....
2
votes
0answers
733 views

How do I get ata-style IDs in /dev/disk/by-id to work for USB disks?

I have USB drive dock that I'm plugging SATA drives into. The way they show up in /dev/disk/by-id seems to be dependent on whether the drive has a partition table (usb if not, ata if yes). This makes ...
2
votes
1answer
105 views

stop an external hard disk from being in group floppy

I have an external hard-disk, connected by usb. Because it is external, the /dev file for it is in group floppy. However I use it as if it is internal. I also sometimes format sd cards and other usb ...
2
votes
1answer
478 views

create several /dev/xconsole files automatically upon boot

I understand from my previous question that the /dev/xconsole file can be created using mkfifo. On my system (Debian Wheezy), /dev/xconsole gets created automatically. I am wondering who creates it (...
2
votes
0answers
322 views

UDEV rule to run partprobe on loop device

I use udisks2 to mount raw image over a loop device: udisksctl -f image.img --no-user-interaction Policykit is configured, so no errors here. For some reason kernel does not want to re-read ...
27
votes
2answers
38k views

How to run custom scripts upon USB device plug-in?

What is the state-of-the-art method for automatically executing custom scripts upon USB device plug-in under current Linux distributions like Debian/CentOS/Fedora? For example if you want to ...
4
votes
1answer
346 views

How to disable USB devices based on their vendor ID on GNU/Linux?

In that question someone wanted a blacklist for all USB devices, and then only allow specific devices. In this question, we want to accept all USB devices, but prevent the driver (e.g. cdc_acm) from ...
2
votes
0answers
347 views

Udev running hibernation script

I have this udev rule that launches a script when the battery level is 5% or below: $ cat /etc/udev/rules.d/90-lowbat.rules: SUBSYSTEM=="power_supply", ATTR{status}=="Discharging", ATTR{capacity}=="...
1
vote
0answers
203 views

How to populate /etc/network/interfaces automatically

I am trying to populate /etc/network/interfaces with a dhcp config for all interfaces at the first system boot (Debian 7.6 server). I modified the script in : /lib/udev/write_net_rules by adding: ...
1
vote
1answer
538 views

Auto-hibernate with udev rule

I'm using Debian Jessie with systemd. In the past I've used an acpid script that let's my computer hibernate when the battery is 5% or below. In an attempt to make a replacement for that I've made ...
2
votes
2answers
426 views

Is there a udev attribute/something that determines whether a device is a USB drive or not?

I am trying to create a UDEV rule to match/allow the use of USB devices. However, there is a twist. I want to be able to use only USB mass storage. Is there a unique UDEV parameter that can be used ...
1
vote
0answers
280 views

Failing to load a module on udev event

I have a pretty simple udev rule which is executed when a USB is plugged into my Debian machine: SUBSYSTEMS=="usb", KERNEL=="sd?", ACTION=="add", RUN+="/usr/local/bin/USB/t.sh \ %k" My t.sh is also ...
2
votes
0answers
1k views

Udev rule not working on Debian

I can detect and mount my USB drive on my Debian VM machine. And the first post here - explained below - works on my Ubuntu machine. Should not it work on Debian too? It doesn't of course. Why is that?...
1
vote
0answers
167 views

Ubuntu 14.04 HDMI UDev Script

I have tried multiple variations to this script but I cannot get it to work. The UDEV Rule fires the script and the script exectutes but simply does not change the audio profile. If I run the script ...
0
votes
2answers
4k views

udev rule trouble on a Raspberry Pi (Raspbrian) using an ACR122U card reader

I am trying to get my ACR122U usable by all users on my Pi. I have the drivers installed correctly and nfc-list is working for root: root@raspberrypi:/etc/udev/rules.d# nfc-list nfc-list uses libnfc ...
1
vote
0answers
25 views

character device file (rtai_shm) disappears under runlevel=5 in fedora9 (exists when runlevel=3)

I am trying to run Realtime (RTAI) on my Linux Fedora 9 machine. For that, it is needed to have a character device file, named rtai_shm, in /dev, that takes care of shared memory. I have made this ...
1
vote
0answers
439 views

udev rules fail to run a script on addition of usb device

Here is a simple rule I created in /etc/udev/rules.d/21-persistent-local.rules for my Seagate 500 GB expansion drive which uses a USB interface on a Debian machine running inside a VM. ACTION=="add",...
7
votes
2answers
890 views

mount is not executed when called by udev

I tried to create some udev rules to mount and unmount my USB flash drives; the rules for the moment are very simple: ACTION=="add",KERNEL=="sd[b-z]",RUN+="/root/scripts/plug_flash_drive.sh %k" ...
4
votes
1answer
3k views

can not create /dev/shm

I need to create /dev/shm on an embedded ARM system. From "Installed The Latest Changes to Current and......". I see that it can be created with mkdir /lib/udev/devices/shm, but I'm wondering what ...
4
votes
1answer
249 views

Is nameif deprecated? If so is there an equivalent replacement?

I read that the nameif is deprecated, although I still see it on my Ubuntu 14.04 system. If this command is deprecated, is the command cited for removal or will it still be available? This command ...
2
votes
1answer
960 views

udev Unable to Rename Network Device: Device or Resource Busy

I'm trying to use udev rules in order to give my network interfaces static, consistent names. However, it seems like there is some race condition happening preventing these rules from consistently ...
2
votes
1answer
658 views

Why doesn't my udev rule work?

I created a file /etc/udev/rules.d/60.alsa.rules with the following content: KERNEL=="0000:00:1b.0", SUBSYSTEM=="pci", ATTR{label}=="Realtek High Definition Audio Device", ATTR{vendor}=="0x8086", ...
2
votes
0answers
539 views

persistent network interface naming and kvm

I wonder why my network interface is still named eth0 in my kvm guests. udevadm just outputs # udevadm test-builtin net_id /sys/class/net/eth0 2> /dev/null ID_NET_NAME_MAC=enxc2184ae7ab3f I ...
2
votes
1answer
775 views

systemd mount volume using device symlink

I'm trying to have systemd mount a volume by symlink. Unfortunately when I try it times out waiting for the systemd device to show up. # systemctl start mnt-ephemeral0.mount A dependency job for mnt-...
1
vote
1answer
239 views

udev rules for PS/2 and game port don't match on attr, only env

When I build rules for either a PS/2 or game port connected device, udev will never match on attributes, but it will on environment values. The reason why this is an issue can be seen in the output ...
1
vote
1answer
481 views

UDev automounting drives as 'usbhd' regardless of type and name on Ubuntu 12.10

I have 3 drives which I use for storage on my system. Here are their mounting points in /etc/fstab # <file system> <mount point> <type> <options> <dump> <...
4
votes
1answer
5k views

Map physical USB device path to the Bus/Device number returned by lsusb

I need to get the title of the attached USB device. I can do that with lsusb. udev allows some substitutions when I write rules: say, we can use $kernel to get name of the device, or $devpath to get ...