3
votes
1answer
31 views

problem when booting linux server : Too many levels of symbolic links

By mistake, I executed these commands : sudo ln -sf bash /bin/sh sudo ln -sf bash /bin/bash When I rebooted the Linux server in recovery mode I got this message: unable to execute too many levels ...
0
votes
1answer
24 views

dual boot from two different harddrives, windows and lubuntu not working

I have a computer with two harddrives. I first installed my Windows 8.1 on my ssd taking up the whole drive. Then on my second 2TB I made 3 partitions. 1TB is dedicated to external storage, 500GB is ...
0
votes
0answers
29 views

Dual Boot with Grub: can't boot Arch Linux [closed]

My history I got a PC with Intel 64 Bit Processor. There I have installed Ubuntu 14.04 LTS at /dev/sdb1 and Arch Linux at /dev/sda1. Both use swap on /dev/sdb2. I tried (with success) to install ...
0
votes
0answers
78 views

Ubuntu server boot assigns names to NICs erratically but all traffic is handled on only one NIC

I have two NICs, em1 and p3p1 on my Ubuntu 14.04 Server. During boot, network interface eth0 is renamed to both em1 and p3p1 but the order is not consistent from one boot to another. In use ALL ...
1
vote
1answer
40 views

Ubuntu How to re-install bootloader

I accidently altered my partition table. Somehow I wiped it out completely and changed the disk label. The system has not been rebooted yet and I managed to rebuild it the way it originally was using ...
1
vote
0answers
40 views

A problem with ubuntu [closed]

I have a Dell Inspiron 1420 with Windows Vista. I wanted to install Ubuntu on it, so I burned the ISO file to a 16GB flash memory and I booted the laptop from it. I tried to install Ubuntu on the hard ...
0
votes
1answer
61 views

Command set in /etc/rc.local on Ubuntu 13.04 is ignored

I am trying to set my Ubuntu 13.04 machine in a way that, upon reboot, an instruction is executed and a program is launched with specific parameters, REGARDLESS of whether a user is logged on to the ...
3
votes
0answers
106 views

windows 7 reinstallation killed grub

I have been running dual boot windows7/ubuntu. Recently I reinstalled windows 7, and I no longer have the option to boot to ubuntu. I would like to be able to get my dual boot working again or at ...
1
vote
0answers
57 views

Multiple Windows 7 installations from Grub

I have the following disk configuration: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes ...
0
votes
1answer
41 views

“Enabling additional executable binary formats” fails

On ubuntu 14.04, after doing do-release-upgrade -d several systems failed like dbus, network-manager, sound card etc.. I am logged into terminal instead of X. Looking at the /var/log/boot.log I ...
3
votes
1answer
1k views

After installing a new Kernel in Ubuntu 14.04, rebooting takes me to busybox initramfs. How do I mount a filesystem after that?

I have a virtual machine with Ubuntu 14.04 in it. I recently built and installed linux-3.14.5 kernel on it, and tried to boot into it, but it drops me to BusyBox v1.21.1 built-in shell. Here's what I ...
2
votes
1answer
480 views

Ubuntu - Booting black screen with purple border

After the installation of Ubuntu, when I try to boot a black screen with a purple box appears without let me see the GRUB menu. Then the screen becomes black and Ubuntu starts booting. Ubuntu is the ...
2
votes
0answers
2k views

Is there a solution for when a system hangs on “switching to clocksource tsc” anyway?

Ok so this is exactly what I did yesterday, and what I have tried to solve the problem so far. The distribution is Ubuntu Server 12.04. What I have done just before the error appeared I added a new ...
2
votes
2answers
152 views

Newly compiled kernel not booting up (vanilla kernel 3.12.14)

I downloaded, configured and installed kernel downloaded from kernel.org. While booting up this new kernel for the first time, this error screen shows which is pointing towards a missing or wrongly ...
3
votes
1answer
106 views

Updating kernel versions when booting from rEFInd

I'm booting from EFI using the awesome rEFInd bootloader. I've so far had to configure boot myself by manually copying over my EFI-compatible linux boot image to my EFI partition and writing a ...
4
votes
2answers
12k views

How to fix boot into initramfs prompt and “mount: can't read '/etc/fstab': No such file or directory” and “No init found”?

Installing a new system using a GPT partitioned disk dedicated to a single partition, ext4 formatted, extlinux (version 4.05) as bootloader, Ubuntu Core version 13.10 amd64 as rootfs, and Ubuntu ...
2
votes
0answers
114 views

When and why is /etc/init/failsafe.conf invoked on Ubuntu Server 12.04?

Could someone please tell me when during the boot process and why /etc/init/failsafe.conf is invoked? If possible, please point me towards a resource (keyword or link) where I could read more about ...
1
vote
1answer
92 views

how to change partitioning?

I have a hdd with /, /home. I just got new SSD and I need to change my partitions without any reinstalling. I would like to create a separate /var partition (which is currently under /) and leave it ...
0
votes
0answers
31 views

Boot Halts if Time if Reset

I have an old powerbook g4 with a dead battery & I am trying to run ubuntu 10.04 on it. Whenever the power cord gets unplugged the date gets set back to Dec. 31st 1969. Apparently when you ...
1
vote
0answers
206 views

How do I fix this boot-up error (attempt to read or write outside of partition)? [closed]

I just installed a version of ubuntu linux that I got from here, http://www.bauer-power.net/2013/06/bauer-puntu-1304-is-alive-download-it.html using vmware workstation. I have installed it before ...
1
vote
1answer
77 views

Ubuntu load and hang on live USB [closed]

I seem to have run into some difficulties trying to install Linux alongside my USB. I made a bootable USB stick and done all the UEFI firmware settings from which I disabled fast boot. Now when I run ...
1
vote
1answer
1k views

mei 0000:00:16.0: init hw failure

When I boot up I get the following errors: mei 0000:00:16.0: init hw failure. mei 0000:00:16.0: initialization failed. (they don't prevent the bootup, I'm just curious as to what they are and if ...
0
votes
1answer
473 views

Why is my machine not showing anything when booting?

I'm using Ubuntu Server 11.10 x86, and after I make my normal selection (Ubuntu, with Linux 3.0.0-12-generic-pae) from the GRUB menu, the screen just goes blank - there's not even a cursor showing up. ...
1
vote
2answers
198 views

Is a bad NFS mount preventing a clean boot?

I'm on Ubuntu server 11.10 (x86) and I basically ran into this problem as this: http://serverfault.com/questions/56588/unmount-a-nfs-mount-where-the-nfs-server-has-disappeared The umount command ...
2
votes
1answer
71 views

How to schedule initial configuration of a system after cloning?

I want to setup a big amount of servers using cloning. After the initial image was applied, I want to run a configuration script. The cloning will be done through hard disk replication by the hardware ...
1
vote
2answers
127 views

Move and empty /home partition of Ubuntu

My partitions are: Ubuntu's / on /dev/sda1 Ubuntu's /home on /dev/sda6/ Crunchbang's / on dev/sda7 Now I want to install Backtrack, but for this I need to get rid of Ubuntu's /home and move its ...
1
vote
1answer
131 views

Ubuntu 13.04 on Acer x64 PC, only boots after starting recovery

I have this strange problem with my Acer E1 421. First of all it's important to say that I've upgraded this laptop's memory to 8gb RAM instead of 2. I decided to remove Windows 7 x64, and install ...
1
vote
0answers
158 views

Memory test while booting . Unable to boot Ubuntu 12 04 LTS

I'm running Ubuntu 12.04 LTS. All of a sudden, my I'm unable to load the OS. A memory test is happening while I'm trying to boot the system.
3
votes
2answers
149 views

Silencing all stdout during bootup

I am looking for a completely silent bootup of my Ubuntu Server 13.04 installation (dumped to file rather than stdout). What I want is the screen to be blacked out (eventually replaced with a logo) ...
0
votes
0answers
199 views

Zorin OS 7 Kernel Panic and boot failure

So I decided to try out Zorin OS 7 x64. Everything was fine during the installation. After a few minutes of browsing the internet with Chrome I got this error: CtrlAltDel didn't work, so I hit ...
1
vote
1answer
91 views

Installed Win7 after Ubuntu, Win removed Ubuntu boot option [duplicate]

Completely 100% new to Linux. I recently partitioned my drive to run Windows and Ubuntu simultaneously. Ubuntu installed fine, but then I installed Win7 and suddenly Ubuntu disappeared from the boot ...
6
votes
3answers
4k views

How to get rid of the “scanning for btrfs file systems” at start-up?

After upgrading from Ubuntu 12.04 to Ubuntu 12.10, I get a message "scanning for btrfs file systems" at starting-up. I don't have any BTRFS filesystem. It delays the booting for about 15 seconds. How ...
0
votes
2answers
611 views

Install Win8 After Ubuntu

I've read that it's best to install win8 before linux. I already have Ubuntu set up with lots of goodies so I don't really want to re-install everything. Is it possible to install win8 now that I have ...
2
votes
1answer
890 views

Running Ubuntu of a USB stick. Can't install wireless driver

I've installed Ubuntu 12.04 on my 8 gb USB stick, and got it running. It seems like I don't have the full Ubuntu OS on the stick though, and that was my intention. Anyway, I can run a "demo" version ...
0
votes
0answers
509 views

*ERROR* timed out waiting for panel to power on

I'm using Ubuntu 13.04 on Asus VX6 (1.8GHz Atom - 2 cores, optimus nVidia ION) with Kernel 3.9.0. When I start my system I get this error: [ 15.728106] [drm:intel_enable_lvds] *ERROR* timed out ...
2
votes
1answer
64 views

Sharing /boot between two Ubuntu 12.04 Server installations?

This question may seem trivial at first sight, but it has certain implications and I'm wondering what is the recommended path to take here. Assume the following scenario: a server system. The default ...
0
votes
0answers
55 views

Boot disk unavailable

Background I've got one 32GB SSD that I have Ubuntu 12.10 installed on (this drive is encrypted), and two 1.5TB drives that will serve as storage and backup respectively. I have formated both drives ...
1
vote
1answer
5k views

Booting Ubuntu from usb on a Mac

I have a Macbook pro (late 2009) running OSX 10.6.8. I want to partition a flash drive and install my Ubuntu iso image onto it. Then I want to boot up from it by (restarting my computer and) holding ...
1
vote
3answers
1k views

Ubuntu doesn't boot normally after manual installing of X.org

I tried to compile and install X.org (for a single card/multiseat in this tutorial) by getting source from here and installing it by: ./configure --enable-kdrive --enable-xephyr --enable-xfake ...
5
votes
1answer
1k views

degraded software raid boot

I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third ...
1
vote
1answer
648 views

How do I get Fedora 17 boot media to boot my laptop?

I have been using Ubuntu since Ubuntu 11.10 came out. I was very satisfied with how Ubuntu has evolved over the past few years, but now I would like to try out Fedora 17 since that has been out for a ...
6
votes
1answer
22k views

Booting linux from usb using EFI

I need to use a USB drive as an installation media for my Mint and Ubuntu. For that I have unetbootin to make the usb bootable. But my PC only supports EFI boot (while adding the boot device, I need ...
1
vote
0answers
233 views

Booting Laptop with external monitor stalls

Whenever I try to boot linux with an external monitor attached to my laptop, it hangs after checking the battery state with the following message repeated several times: ...crtc_helper_set_config... ...
0
votes
3answers
2k views

How do I install Ubuntu from Suse?

I just got a new laptop (HP ProBook 4520s), and I don't have my PC here, with which I used to create bootable USB's to install Ubuntu with. I only have an USB, an external hard drive, and some ...
1
vote
2answers
230 views

Why does boot fail with my custom kernel at the mknod step?

I want to build a custom kernel under Ubuntu. I configured and built the new kernel. The new kernel hasn't initrd and comes from vanilla source. I build this new monolithic kernel only with drivers it ...
3
votes
1answer
3k views

Uninstall the Encrypted LVM function to remove the prompted password entry during Ubuntu Boot

When I installed Ubuntu 11.04 and I was offered the option of enabling "encrypted LVM" for my hard drive. After choosing that option, I am prompted for my password during boot to decrypt the LVM. ...
1
vote
1answer
574 views

pxe boot: problems with /etc/resolv.conf

I'm pxe booting a node (Ubuntu 11.10). The image of the node is created with debootstrap. Works great. Everything is loaded. When I login to the node I see that /etc/resolv.conf is empty. In the base ...
2
votes
2answers
4k views

Kernel Panic - not syncing: VFS: Unable to mount root fs after new kernel compile

So I've been at this for a while and have been poking around for an answer for a few days, and figure it's about time to ask for help. I am running Ubuntu 10.10 in VMWare Fusion, and have downloaded ...
3
votes
6answers
15k views

Black screen at boot with Mint and Ubuntu live CDs

I just bought an HP pavillion g6 laptop, with the hope of installing Linux on it. I have now tried both Linux Mint (my first choice) and Ubuntu, and both simply give me a black screen from the moment ...
2
votes
2answers
156 views

Determining longest time taken in boot process

I'd like to find out what takes the most time in my boot process from GRUB to the Ubuntu login screen. How can I profile my boot process to find out what's taking so long?