A representation of a device that asynchronously transmits and receives serial data.

learn more… | top users | synonyms

7
votes
1answer
122 views

Why does 8250 UART driver not wake up TTY if more than 256 characters are pending?

What is the motivation of this if-condition in void serial8250_tx_chars(struct uart_8250_port *up)? if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); It has been ...
5
votes
1answer
470 views

Linux VT Emacs in tmux, breaks color and cursor

TERM is set to screen. I tried with screen-256color, but then the colors went really nuts. I also tried xterm, linux, and some others (that I could think of, not really thinking) but screen is the ...
4
votes
0answers
237 views

Start application using xinit on different tty

I'm using Fedora 21, trying the following: On tty1 is running KDE, just as normal. But to speed up my games/avoid them changing something like gamma, I want to run them on a differnt tty, starting a ...
4
votes
0answers
451 views

How to prevent kernel or any broadcast messages from flooding the TTYs?

Because of some hot-plugging issue, similar to what talked of here, the TTY displays show a continuous stream of messages (which are also logged in the /var/log directory). Every text I key in flows ...
3
votes
0answers
33 views

slow file transfer through serial port with cat

I'm transferring a binary file to an embedded device using a custom AT command set. I'm running Lubuntu Linux on a virtual machine (Windows 7 host) and the virtual linux guest controls the physical ...
3
votes
0answers
38 views

Why only 4 chars get sent to serial port via command-line

I'm trying to communicate with NodeMCU (CP210x USB/UART) from command-line. However it does not respond to my commands. I have set the correct baudrate via stty 9600 raw. echo "gpio.write(0,gpio.LOW)"...
3
votes
0answers
901 views

Plymouth splash not working and causing VT problems

Since I tried installing Plymouth (boot splash), I'm facing two problems : It's not working My Virtual Terminals (tt1 - 6) aren't working anymore Here what I did : Added plymouth hook (after ...
3
votes
0answers
132 views

No Login on created on tty2 to 6

On my Debian Linux no Login is possible on terminals 2 to 6. Login on 1 works fine, xorg-session with XDM and awesome wm works, too. The Error Message shown on these 5 screens is: systemd-logind[...]...
3
votes
0answers
597 views

stty before login

We've got some HP-UX Integrity VMs that are difficult to log in to at the console because the KILL character is set to @, which also happens to be a component of some passwords. Now I know we can get ...
2
votes
0answers
89 views

How to send AT commands to serial interface in Yocto Linux?

I have a XBee device attached to the ttyMDF1 interface on an Intel Edison board running Yocto linux. I need to configure the XBee by sending AT commands to it. I have tried to open a getty /dev/...
2
votes
0answers
340 views

How could a user log in via tty

I rented this cloud server, and it is kind of attacked recently. I can see a suspicious user logged in via tty. leetom@S152:~$ last -x ayn1 ayn1 tty1 Wed Oct 28 18:59 - ...
2
votes
0answers
277 views

Where EOF character is processed when it sent over telnet connection

Lets suppose I am connecting to telnet server, where bash is running. I am executing comand "cat > /tmp/qqq"; typing some contents of a file and finally sending 0x0a 0x04 which meant EOF. The ...
2
votes
0answers
696 views

cat /dev/ttyS0 Input/output error

I created infrared receiver as in LIRC manual (http://www.lirc.org/receivers.html). And tested it on windows using program called Terminal. When I switched on RTS pin DCD pin was also switched on ...
2
votes
0answers
82 views

How to use secondary VGA device for TTYs

I have a machine (a virtual XEN DomU, but I don't think it matters) with two video cards. I would like to display the TTYs on the monitor connected to the secondary video card (i.e., not the display ...
2
votes
0answers
511 views

Can't login using serial on ttyO0 - BeagleBone Black

I boot Beaglebone Black, connected to my desktop by serial. It was working great, until now. Beagle is booting, output shows up on the console, but at the end I can't log in. I can't type the login, ...
2
votes
0answers
447 views

tty blinking cursor not at insertion point

I have an Ubuntu 12.04 system where I, at reboot, login a root. This morning I did the things I had to and thought about running apt-get -y upgrade I started typing this but before pressing Enter I ...
2
votes
0answers
158 views

Controlling ppp's chat buffering

I looked at the ppp chat source and it uses putchar to write to the device. When PPP is run over a line discipline like n_gsm, which multiplexes a tty via the GSM 07.10 protocol, a lot of extra data ...
1
vote
0answers
21 views

MOZREPL output showing up in terminal window

I have a very a annoying problem. I've using Mac Terminal over SSH to write Perl script with vim on a local virtual Debian machine. The Perl script uses the WWW::Mechanize::Firefox module which in ...
1
vote
0answers
63 views

Unable to get login prompt on /dev/ttyUSB0

I am attempting to connect a TI-89 graphing calculator as a serial terminal to a Raspberry Pi running the latest version of Raspbian. The calculator is emulating a PL2303 serial adapter at /dev/...
1
vote
0answers
34 views

Forward stdout to different tty

I have an external device, that I can send commands to, and it would respond in a certain way. For this I use two terminals, one sending the commands and one listening to the response. At some point I ...
1
vote
0answers
77 views

Verizon LG VL600 USB 4g Modem

I am trying to connect an LG VL600 USB 4g Modem from Verizon on a Debian based machine (tried on Linux Mint and Raspberry Pi). I got it working on Windows 7 Virtualbox VM so I know the device and ...
1
vote
0answers
37 views

xfce4-Terminal doesn't create a new pts session?

I'm running Openbox on Manjaro, and I've come across a peculiarity trying to use write and wall with some friends. I use xfce4-terminal as my preferred terminal emulator, and I was never able to get ...
1
vote
0answers
15 views

Editing missing characters in some charmap/keyboard

I use the abnt2 layout on my american keyboard, but the backslash key \ is missing. How can I remap some glyph to an unused key or combination (eg. CtrlAltE or AltGrE)? I knows only that /usr/share/...
1
vote
0answers
32 views

'Unbusy' terminals which will be logged out when TMOUT is reached

I would like auto-logout some terminal sessions with a TMOUT (timeout) configuration, but in that case the users leave a program opened for which the 'unbusy' sign is the ZERO I/O between server and ...
1
vote
0answers
75 views

U-Boot: Changing TTY columns and rows for virtual consoles

Having installed GRUB as boot manager allows the operating system (Linux) to boot on specific video mode so the TTY virtual consoles change its columns and rows (width and height). For example, ...
1
vote
0answers
121 views

Setting custom baud rate on console

Just for aesthetics I would like to have my text on my console be displayed at a lower speed. I've tried using things like screen with custom baud rates of /dev/tty1 but it wouldn't work, input from ...
1
vote
0answers
126 views

how to copy files using TTY teminal from one pc to another connected through same home network

In my academic lab my friend copied files from one computer to another that were serially connected using the tty4. How could he have done this if there was no internet and he didn't install any new ...
1
vote
0answers
156 views

Fedora 21 VT Change Hangs

On Fedora 21, I have LightDM and i3 installed. When I switch to tty2 and do a bit of work then switch back, my laptop hangs. I am using Intel HD Graphics 4600. Thanks UPDATE now it sometimes ...
1
vote
0answers
118 views

How to avoid session login failure with ecryptfs

After encrypting my /home directory with the migrate-home ecryptfs-utils script I can't log in to an XFCE session on my Manjaro system from the normal login screen. If I try to, the session is ...
1
vote
0answers
103 views

How do I assign the controlling terminal to other process?

I use TIOCSCTTY to forcibly take over the controlling terminal in other "remote" application. But after the application finishes running, controlling terminal gets orphaned and bash stops reacting to ...
1
vote
0answers
214 views

Cygwin serial tty device for high-numbered COM ports

My hardware enumerates as COM125 on the device manager (CDC-ACM class). But, I can't find it under /dev/tty* listing. Does cygwin have a limitation on CDC-ACM class of com ports or numbers greater ...
1
vote
0answers
81 views

Can slattach control a serial WiFi device?

I have a Wi-Fi device which is driven by AT commands over a USB-Serial connection. I am able to successfully make a serial connection to the device and set the SSID, PSK, obtain an IP address, and do ...
1
vote
0answers
712 views

Only met by a tty “login” prompt when booting Mint

I've installed Linux Mint 11 Katya (dual-booting with Win7) on my PC. After some problems with booting, I decided to use NeoGrub to add a Grub-based bootloader, configurable from within Windows, to ...
1
vote
0answers
481 views

LMDE, Graphics with i915 and KMS: DVI not working on tty consoles

I already asked the same question at Super User, but I think it's better suited here, sorry: I have some problems getting the DVI output of my onboard Intel graphics device running when using KMS. ...
0
votes
0answers
10 views

Garbled font on tty1 (but not tty2-6) after booting

Running the latest OpenSUSE Tumbleweed, near the end of boot tty1's font gets completely scrambled (see the picture below). It's fine until shortly after mounting /, and the other ttys work just fine. ...
0
votes
0answers
27 views

Fresh Arch Installation - Terminal text completely unreadable just after boot

Update: Added additional text to identify which images are merely blurry, and which depict fubar text. My laptop is a Toshiba CB35-B3340. Also called a Chromebook 2, with part number PLM02U-009008. I ...
0
votes
0answers
30 views

Attach framebuffer console(yaft) to existing tty(of own script)

I currently try to fiddle around with my android init ramdisk. One problem I'm currently trying to debug is that ADB in my new init won't start. The script works fine otherwise though, I used fbsplash ...
0
votes
0answers
61 views

No RC messages at the start between kernel loading and login prompt

I have a 4.3.2 kernel and OpenRC 0.19.1. After the kernel loads there is no messages from the RC scripts. And then, there is the prompt to log in. There is another system with identical rc.conf and ...
0
votes
0answers
9 views

Texas TI RFID Reader Hardware

[ 7598.927163] usb 1-1.3: USB disconnect, device number 10 [ 7636.541074] usb 1-1.3: new full-speed USB device number 11 using dwc_otg [ 7636.646870] usb 1-1.3: New USB device found, idVendor=2047, ...
0
votes
0answers
72 views

QEMU kernel panic to serial port

I'm working with kernel 2.6.13.1 on Debian 6 with QEMU/KVM for a class. The kernel, once installed, panics on boot. The curses interface to qemu doesn't seem to allow scrollback to view the entire ...
0
votes
0answers
38 views

Zenity, how to manage cryptsetup prompt?

With Zenity, I display a progressBar and install/config many stuff on a Linux Mint (Debian) computer. I had to avoid any prompt. But one step prompts Enter a passphrase:, this is cryptsetup ...
0
votes
0answers
283 views

Serial port locked by random process

I have an issue with trying to open a USB device's serial port with pyserial. It seems that as fast as I connect the device, /dev/ttyACM0 is used by some random process. ModemMana 851 root 8u ...
0
votes
0answers
269 views

linux + what are the messages bad tty under /var/log/messages file

under /var/log/messages I see the following messages "bad tty" what the meaning of these messages? second is it caused because some application that called - owstd ? as we can see from the log? ...
0
votes
0answers
320 views

How to switch between the virtual consoles ttyv1, ttyv2 10 on FreeBSD?

The CTRL+ALT+F1..F12 keybinding does not work. I'm using kde interface.
0
votes
0answers
279 views

How to make switching virtual terminals instant?

I've configured kdm (editing /usr/share/config/kdm/kdmrc) to automatically open two displays: StaticServers=:0,:1. When I switch between them with Ctrl+Alt+F7-8 there is a delay of about 2 seconds ...
0
votes
0answers
2k views

TTY1 message help? (with picture)

When I boot up , I am greeted with a black TTY1 screen with the following error Kali GNU/Linux 1.0.7 kali tty (screenshot here) Kali Login:[ 31.695480] brcmsmac: bcma0:0: brcmsmac: ...
0
votes
0answers
233 views

Schemes for linux tty and xterm

I actually prefer the font and colorscheme used when I'm in a tty terminal. After I start up a window manager, the colorscheme and font are completely different when I'm in xterm -- which is expected. ...
0
votes
0answers
445 views

Which getty should I use for /dev/tty1 - tty6 text consoles in linux, agetty or something other

I'm configuring LFS linux and I want to select right "getty" for /etc/inittab to handle text consoles /dev/tty1 - /dev/tty6 (the text consoles handled by linux kernel, with output on first display). ...
0
votes
0answers
158 views

Root has no permission on virtual console screen devices

Even being root I can't do the following: # cat /dev/vcs1 cat: /dev/vcs1: Operation not permitted And the rights are set correctly: # ls -o /dev/ crw-r--r-- 1 root 7, 1 Aug 5 22:00 vcs1 ...
0
votes
0answers
602 views

Ubuntu cannot start from terminal

Ubuntu 12.04 By a mistake, I stopped lightdm. Then switched to tty1, and rebooted. Now, After startup, It just came a black screen with a cursor, can type nothing. I tried Ctrl+F1 to F12 (and Ctrl+...