A representation of a device that asynchronously transmits and receives serial data.

learn more… | top users | synonyms

3
votes
1answer
673 views

Use sudo with ssh command and capturing stdout

I'm trying to run a command as root (via sudo) on a remote server, and capture stdout (but not stderr) into a file. eg. Something like this: ssh user@remote "cat /root/file.tar | gzip" > ...
3
votes
2answers
495 views

leaking memory with shell script and tty [closed]

I'm running a shell script on a raspberry pi to communicate with a arduino. Every hour my ram gets used up by about 50 megabytes more. The script itself just connects to ttyACM0 (the arduino's usb ...
2
votes
0answers
80 views

How to use secondary VGA device for TTYs

I have a machine (a virtual XEN DomU, but I don't think it matters) with two video cards. I would like to display the TTYs on the monitor connected to the secondary video card (i.e., not the display ...
6
votes
4answers
31k views

Pseudo-terminal will not be allocated because stdin is not a terminal

I'm trying to set up automatic SSH hopping through a server which doesn't have nc. This works from the command line: ssh -A gateway ssh steve@target (I have added my public key to the SSH agent). ...
0
votes
1answer
1k views

Xorg with Kernel Mode Settings won't work with other tty

Using intel video drivers with kms and i915 on arch linux I haven't been able to start Xorg in a different tty than from the calling one logged as root. By example: Logged as root on tty1 X vt7 :0 ...
2
votes
2answers
348 views

Connect two ttySx devices on the same machine

I'm just wondering, whether it is possible to connect /dev/ttyS0 with a virtual device node (e.g. a created with mknod /dev/ttyTest) so that the output from ttyS0 is sent to ttyTest. I would like to ...
1
vote
1answer
444 views

Can I switch to another process in another tty# terminal from an ssh terminal?

Here's the deal. I have a Linux Mint 15 server running a web server, an ssh server, and a minecraft server. When I go back to college after the summer, I want to leave my machine at home (6 hrs away) ...
5
votes
1answer
2k views

look up the device from its tty file?

Here is from my Ubuntu $ ls /dev/*tty* /dev/tty /dev/tty17 /dev/tty26 /dev/tty35 /dev/tty44 /dev/tty53 /dev/tty62 /dev/ttyS12 /dev/ttyS21 /dev/ttyS30 /dev/tty0 /dev/tty18 /dev/tty27 ...
0
votes
1answer
37 views

How can I automatically interrupt what I'm doing to input something?

As per Nick Winter's The Motivation Hacker, I want to measure my happiness. I know that I'm bad at remembering things or responding to reminders, so I'd like to set up a daemon that, at random ...
2
votes
1answer
5k views

Unable to receive data from /dev/ttyACM0 device [closed]

Using USB based CAN device connected on AR9350 mips processor based Atheros reference board with linux kernel 2.6.32.61. Which is coming up as /dev/ttyACM0 device. In which Able to transmit data from ...
8
votes
5answers
6k views

How can I run `watch` as a background job?

When I run: watch 'cmd >> output.txt' & the job gets suspended by the system: 3569 Stopped (tty output) Is there a workaround?
2
votes
0answers
500 views

Can't login using serial on ttyO0 - BeagleBone Black

I boot Beaglebone Black, connected to my desktop by serial. It was working great, until now. Beagle is booting, output shows up on the console, but at the end I can't log in. I can't type the login, ...
1
vote
0answers
99 views

How do I assign the controlling terminal to other process?

I use TIOCSCTTY to forcibly take over the controlling terminal in other "remote" application. But after the application finishes running, controlling terminal gets orphaned and bash stops reacting to ...
46
votes
2answers
48k views

Difference between pts and tty

Possible Duplicate: What is the exact difference between a 'terminal', a 'shell', a 'tty' and a 'console'? I always see pts and tty when I use the who ...
0
votes
0answers
2k views

TTY1 message help? (with picture)

When I boot up , I am greeted with a black TTY1 screen with the following error Kali GNU/Linux 1.0.7 kali tty (screenshot here) Kali Login:[ 31.695480] brcmsmac: bcma0:0: brcmsmac: ...
0
votes
1answer
167 views

Letters tty terminal text mode are very small in debian. How to increase? [duplicate]

My Debian 7 is with letters tty terminal text mode are very small. How to increase? I know that Fedora 20 is possible to install in a troubleshooting installation. Thanks!
6
votes
1answer
34k views

How to read/write to tty* device?

I have a device that sends information over USB to my computer. Arch Linux sets up this device by creating a file named ttyUSB0 in /dev/. I have been using GTKterm to receive this incoming information ...
0
votes
2answers
156 views

systemctl start depending on tty

I would like to start Apache automatically on my machine, but only if I login from TTY1 (I do not run a display manager). If I log in from any other TTY, it should not start. I tried this in my ...
1
vote
1answer
292 views

Meaning of entries in /etc/securetty?

I've been given a set of entries to apply to /etc/securetty, what does each of them mean? console tty1cd / tty2 tty3 tty4 tty5 tty6 ttyS0 ttyS1 I'm especially interested in the "tty1cd /" entry. I ...
2
votes
1answer
794 views

Remove the newline before `/etc/issue` in tty

I want to remove the default newline inserted before the content of /etc/issue on login prompt in tty. I'm using agetty and systemd. I tried to add the --nonewline option to my getty@tty5.service : ...
4
votes
2answers
890 views

What is the TTY major number of your Unix?

I'm currently working on a serial port library which already uses special frameworks to get information about serial ports on the system. Though serial ports are a fundamental design in Unix—as ...
4
votes
1answer
3k views

Comunicate with remote Serial over TCP/IP as /dev/ttyX device

I've one serial device on 192.168.x.x:yyyy (where "x" and "y" are real number) and it works correctly. But I want to communicate with this as /dev/ttyX device. I've tested socat command but not ...
0
votes
0answers
226 views

Schemes for linux tty and xterm

I actually prefer the font and colorscheme used when I'm in a tty terminal. After I start up a window manager, the colorscheme and font are completely different when I'm in xterm -- which is expected. ...
1
vote
0answers
208 views

Cygwin serial tty device for high-numbered COM ports

My hardware enumerates as COM125 on the device manager (CDC-ACM class). But, I can't find it under /dev/tty* listing. Does cygwin have a limitation on CDC-ACM class of com ports or numbers greater ...
2
votes
2answers
481 views

How to interpret all fields of `utmpdump /var/log/utmp`

I'd like to monitor logged in sessions, include how they logged in (physical console or SSH), and how long that session has existed for. It seems like utmpdump /var/log/utmp has that information, but ...
3
votes
1answer
101 views

Where can i find any information about ancient doshell(8)?

I check the openvt manual by running "man openvt" command, and i found doshell(8) under "SEE ALSO" section: But there's no manual if i do "man 8 doshell": I checked the online manual at ...
3
votes
2answers
4k views

How do I run a command on a TTY from a SSH session?

Does anyone know of a way that I could run a command from my ssh session and have it display on tty1? It seems like I could do that like: script command >> /dev/tty1. However, if I were to do ...
4
votes
4answers
410 views

Login into a GNU/Linux distribution is taking too long

So, When I try to login with my username and password (in tty), and insert a wrong password, I need to wait around 5 seconds for the system to tell me that the password is wrong. Why the validating ...
6
votes
1answer
2k views

How to use agetty from the command line

Is it possible to use agetty from the command line? I tried the command sudo agetty -s 34800 tty8 linux but it returns after a few seconds and tty8 is not open. Is it the expected behaviour? Also, ...
1
vote
1answer
853 views

How can I print out the current keybindings in Linux/Debian? [closed]

How can I print out the current keybindings in Linux/Debian ? I tried xmodmap -pp and got the response: xmodmap: unable to open display ''
0
votes
0answers
417 views

Which getty should I use for /dev/tty1 - tty6 text consoles in linux, agetty or something other

I'm configuring LFS linux and I want to select right "getty" for /etc/inittab to handle text consoles /dev/tty1 - /dev/tty6 (the text consoles handled by linux kernel, with output on first display). ...
1
vote
0answers
81 views

Can slattach control a serial WiFi device?

I have a Wi-Fi device which is driven by AT commands over a USB-Serial connection. I am able to successfully make a serial connection to the device and set the SSID, PSK, obtain an IP address, and do ...
3
votes
2answers
2k views

Changing TTY font to a non-default font

I found two ways to change the TTY font: dpkg-reconfigure console-setup editing /etc/default/console-setup Either way I'm limited to the fonts in /usr/share/consolefonts (I'm using Debian). How ...
4
votes
2answers
554 views

How to redirect tty1 to an X11 (KDE) Konsole shell?

I would like to see what is going on at tty1 - the console I was booting from - while I am now on tty7 running X11 with KDE4, without switching back to tty1 (Ctrl+Alt+F1). I would like to see it ...
6
votes
2answers
2k views

How can I launch applications from 2 ttys on launch?

I've currently got 2 ttys logging in automatically, but I need to launch a node script from one and a C program from another as soon as the device loads. The device is a Raspberry Pi running ...
2
votes
1answer
2k views

Connect to pseudoterminal (same user) from lost session [duplicate]

I was running several large processes at once, and my PC froze (I suspect due to heat, its a laptop, and the fan was at maximum for several minutes just prior to locking up). The mouse cursor moved, ...
2
votes
1answer
99 views

Is monitoring rsync with a pts device possible?

I have a rsync backup script, and I was wondering about methods of monitoring it as it runs. I could have it save a log and use watch and tail, but I had a more elegant solution in mind that might be ...
5
votes
1answer
464 views

Linux VT Emacs in tmux, breaks color and cursor

TERM is set to screen. I tried with screen-256color, but then the colors went really nuts. I also tried xterm, linux, and some others (that I could think of, not really thinking) but screen is the ...
2
votes
1answer
741 views

How to connect to virtual /dev/ttyX from same machines pts terminal?

I want to get output/input from /dev/ttyX console (normally accessible directly using keys ctrl+alt+FNr, where Nr is number of /dev/ttyNr: ctrl+alt+f4 access /dev/tty4). I want to view and control ...
1
vote
2answers
255 views

Is there a way to add some info about time/date to TTY prompt?

If you have a graphical display manager, you can notice date and time there, but I haven't seen such a thing when it comes to TTY. If I want to check the current time (or date) I have to log in. It's ...
1
vote
1answer
657 views

Track down process that has notty

I have a Linux server (Red Hat 2.6 kernel) which had a spike in load due to an Rsync process which seems to have forked many times, but the process was run by rsyncuser@notty I didnt see any cron job ...
5
votes
2answers
5k views

How to change the default TTY after boot?

Normally when system starts you have all output printed on the TTY1, and that's ok, but I start X-server via startx and achieve this by the following lines in the ~/.profile file : if [[ $(tty) = ...
3
votes
1answer
3k views

How can I pipe commands to any terminal?

I often use more than one terminal (or terminal emulator) at a time; and while in X I can copy-paste commands, besides not being very practical, it obviously does not work on the real TTY. The first ...
-1
votes
1answer
887 views

Linux TTY Colours

I've had this issue for a little while now on a few machines, but never thought to ask anyone. Upon installing a new laptop the other day, and using the virtual terminal for a bit, I noticed that ...
3
votes
2answers
170 views

Why does the Linux virtual terminal support only 16 colors, by default?

Why does the Linux virtual terminal support only 16 colors, by default? Is there a particular reason for this?
2
votes
1answer
1k views

Re-ordering serial ports on a multiport card

I have a Red Hat Enterprise 6.2 machine with two on-board serial ports and a PCIe card with 8 additional serial ports (16C950 UARTs, 16C550 compliant). I've added the kernel option 8250.nr_uarts=10 so ...
3
votes
3answers
1k views

X11 forwarding through SSH

I have been playing around with X11 forwarding the past few hours and so far I've managed to forward my desktop pc's X Server to my laptop, using X11VNC as server and X2VNC as client. X2VNC uses ...
1
vote
0answers
695 views

Only met by a tty “login” prompt when booting Mint

I've installed Linux Mint 11 Katya (dual-booting with Win7) on my PC. After some problems with booting, I decided to use NeoGrub to add a Grub-based bootloader, configurable from within Windows, to ...
8
votes
2answers
2k views

Detect if running in a virtual terminal?

I'd like to autologin to tty1 on login and then use vlock to lock it. How can I detect from Bash if the current terminal is a console virtual terminal (e.g. tty1), so that I can put the vlock line ...
2
votes
2answers
4k views

how to re-enable input on a serial console

I have an old router which runs Linux and I'd like to have a serial console on. This used to work fine, but after a firmware update, I can now only get output on the console and cannot give any input ...