the startup sequence, from the time the kernel goes live to when all services are up and running

learn more… | top users | synonyms

6
votes
0answers
127 views

How to pause (or capture) the messages that fly by at the end of startup sequence?

Towards the end of the "startup sequence"1, I see a longish series of diagnostic messages fly by very quickly, right before I see the login prompt2. AFAICT, most, if not all, of the lines making up ...
3
votes
0answers
83 views

Stop init.d from running, and go to terminal prompt

I'm running Rasbian (Debian?) on my Raspberry Pi, and have allot of auto-starting things in init.d. But what if I want to stop them all from running, and simply break into a terminal prompt? I've ...
2
votes
0answers
73 views

Running a service before log in

I don't like opening a question here for such a, seemingly, simple issue; but I've been stuck on this for a while now and I have no idea what to do next. I'm running a Fedora 22 system on a ...
2
votes
0answers
37 views

Set up bluetooth keyboard to enter disk encryption password

How can I set up a bluetooth keyboard, so that I can use it to enter the disk encryption key, so that my encrypted linux system boots.
2
votes
0answers
573 views

Startup problem: invalid partition table or use UEFI BOOT

I'm working on a Dell Latitude E5430. Recently I booted pcbsd from USB using this file: PCBSD10.1.1-RELEASE-01-31-2015-x64-DVD-USB_0.iso But I guess I did something wrong. I was trying to install ...
2
votes
0answers
73 views

Linux Networking Bootup script takes too long

I am working with a fork of a raspberry pi SoC. One of the modification is the use of AP6210 WiFi/Bluetooth chip. I am running Debian. During boot up, the following 3 startup scripts need to run in ...
2
votes
0answers
197 views

System freeze on “setting up alsa”

I use Debian wheezy and I boot the computer and get stuck in the line: [....] setting up alsa .... It freezes, it only responds to "REUSIB" (Emergency Reboot With Magic SysRq), but it is unusable as ...
2
votes
0answers
94 views

Scripts cannot run simultaneously on startup

I want two scripts (Server_drive, Server_video_boot) running on startup, but there is conflict between them. Specifically, there is always running the script with the lower priority. I tried with many ...
2
votes
0answers
84 views

Run script when window manager loads using root owned 700 autostart file

One of the 3rd party proprietary GUI software I use requires typing login credentials every time I log in to my Cinnamon desktop. It does not support autologin of any kind. Therefore, I decided to ...
2
votes
0answers
53 views

Find out if system startup was initiated by rtc alarm

How can I know if a system startup was initiated by an rtc alarm event in linux? I am writing some scripts that handle sleeping/shutdown of my htpc. I want the machine to sleep after recording has ...
2
votes
0answers
471 views

Run a command before services are started

I have a Oracle Linux 6.3 system on which I would like to run a command when the machines starts up before any other services are started. The reason for this is to try and work around a bug in RHEL ...
2
votes
0answers
675 views

How to write a systemd script that runs usb_modeswitch and connects to the internet at startup?

I have a cisco AM10 wireless adapter and every boot, I need to run usb_modeswitch -v 1307 -p 1169 -L -I -u -l to get it to function as an adapter. Then I have to run a netcfg profile to connect to ...
2
votes
0answers
528 views

Why if I don't disable nm-applet and xfce4-volumed my startup slows down?

I'm running Xubuntu 12.04, and after I ran the update, my login started slowing down big time. I've dabbled a little bit with the programs in Settings -> Settings Manager -> Session and Startup, and ...
2
votes
0answers
207 views

Automatically start named pipe reader on startup?

I'm trying to run a script with root access from PHP. I can't do that because Apache's user, www-data, don't have root access because of security reasons. To fix that, I was advised to use a named ...
2
votes
0answers
158 views

How to make system startup to not wait on particular systemd service start

I have few virtual machines running under libvirt, and they are stared on the host system startup. This is controlled by libvirtd.service systemd configuration. This delays the availability of the ...
1
vote
0answers
22 views

How to start a service upon an lxc container start?

I would like to start OpenVPN automatically upon the launch of its lcx container. The container runs Ubuntu 14.04.4 LTS, service openvpn start is successful (when launched from the running container) ...
1
vote
0answers
36 views

Configuring update-rc.d script for startup only

I'm running Yocto Poky and have a test script I want to run on startup only. The script just appends date to a file echo $(date) >> ~/test.txt. I add it to the daemon with: update-rc.d -f ...
1
vote
0answers
122 views

Disable isc-dhcp-server form startup

I am working with isc-dhcp-server on ubuntu 14.04.1, and i don't want that it run on start up so I disabled it from rc with sudo update-rc.d -f isc-dhcp-server remove But it still run on startup, I ...
1
vote
0answers
15 views

Autoloading a particular driver, based on a detected specific kernel

I need some help in writing a tiny script and determining its placement within Debian 7.9 filesystem. As the title says, the script needs to be executed automatically on startup and, after checking ...
1
vote
0answers
120 views

PPTP VPN client auto startup : need to restart network interface

The PPTP client works well. So the following lines were added in /etc/network/interfaces to enable the tunnel at system startup : auto tunnel iface tunnel inet ppp provider myTunnel according ...
1
vote
0answers
167 views

“map: vt01 => fb0” - what is that?

At startup of Rasbian on Raspberry PI, when console asks for login I can see the following text: map: vt01 => fb0 What does that mean? How can I disable it? (hide this message, I would only like ...
1
vote
0answers
15 views

Linux Mint Hangs on Battery Check, Can't Access Terminal

freaking out a bit here. Put in a lot of work tonight on a major paper that I cannot now access. I was just about to go to bed and launched Minecraft for a 10 minute time of decompression and ...
1
vote
0answers
16 views

Relative benefits of systemd and update-rc.d for boot scripting

I've been using update-rc.d to get scripts to run on startup on Yocto, which lacks an /etc/rc.local file. Now I've just come across systemd, which appears to do exactly the same thing. Can anyone ...
1
vote
0answers
74 views

ConsoleKit reports active/is-local only on the second+ login

Running KDE Frameworks 5, Plasma 5, using sddm as a display manager. ConsoleKit and PAM-linux are both installed. Upon login (using the sddm login screen), ck-list-sessions returns FALSE for both ...
1
vote
0answers
2k views

How to recover missing serverauth so user can startx?

I've been using PCLinuxOS. All was OK until the Hard Drive had a bad block. After some fsck repair, from the shell, I tried to startx: xauth: file /home/joe/.serverauth.2052 does not exist. ...
1
vote
0answers
118 views

bootup hangs on “started monitoring of lvm2 mirrors”

Recently I had some problems with hard disk. I think I solved that problems, but now my computer (with Debian) doesn't boot up. It hangs for several minutes on "started monitoring of lvm2 mirrors" ...
1
vote
0answers
47 views

Where can I put settings that are run with root and last from start of OS till it shuts down?

Where can I put settings that are run with root and last from start of OS till it shuts down? One requirement is that when I suspend/hibernate my Ubuntu 12.04 and wake it up, the settings should not ...
1
vote
0answers
440 views

CentOS VPS not starting after installing zPanel

I've had some trouble earlier installing zPanel, but then I was told that I've been using the wrong package, I was supposed to use the 32-bit version, but kept trying with 64-bit. After figuring that, ...
1
vote
0answers
144 views

Can't reliably create a directory on startup after ec2 instance mounts its ephemeral drives

This particular instance type mounts two ephemeral drives, in /dev/ and /mnt/. I have to create working directories for one of my services in these paths at startup or the services won't launch. ...
1
vote
0answers
153 views

Modifying resolv.conf when when bringing network interface up on system startup

My Linux box currently has a network interface that allows me to connect to a network on a different subnet. I've achieved this by modifying the routing table when the network interface is brought up. ...
1
vote
0answers
1k views

xrandr config not loading properly at startup from .xprofile

I'm using xrandr to rescale the resolution on a netbook (Ubuntu 12.10). When I run the following command it works fine: xrandr --output LVDS1 --mode 1024x600 --panning 1280x720 --scale 1.25x1.2 ...
1
vote
0answers
370 views

KDE Startup Applications over xrdp

I have Google Chrome installed on my machine. The new chrome runs in the background (for addons like google chat) and has an entry in the KDE startup apps. The trouble I am facing is that when I log ...
0
votes
0answers
18 views

I'm able Start Service With init.d script, however doing service <service name> start does not work

I'm able to start a service with an init.d script, however doing service <service name> start does not work. For e.g. /etc/init.d/haskal start, the service is starting fine and service haskal ...
0
votes
0answers
41 views

Run sh script at system startup - Red Hat 7.2

I searched the Internet but there are too much different opinions about this issue. I have two scripts to run. One to run at system startup (not at system reboot as I read in some posts) and another ...
0
votes
0answers
17 views

custom bootup/shutdown message

I am using Debian. I set my own image during boot (so no boot messages are visible). When I start PC my own image is shown, then approx 15 seconds black screen is visible and after that it shows my ...
0
votes
0answers
11 views

Random applications starts after log in

Recently I've changed desktop environment from fluxbox to KDE. After that weird things starts to happen . Firstly I noticed that even if I'm logging into kde, my fluxbox startup applications are ...
0
votes
0answers
20 views

Successful Kali 2 VB Install, but Cannot Start

I have 32-bit Ubuntu host machine with VirtualBox. Downloaded and installed kali-linux-2016.1-i386.iso from Kali Linux Downloads Here is the configuration But when I attempt to run Kali 2 from ...
0
votes
0answers
46 views

Does the following error indicate my system is compromised?

[FAILED] Failed to Verify Integrity of password and group files. See 'systemctl status shadow.service' for details. I get this message in T1 every time I start up the computer but I havn't noticed ...
0
votes
0answers
13 views

Add CLI based Startup Application

I would like to start the cmus in terminal as a startup Application. I tried: --> cmus command as startup application. But it didnot open in the terminal.
0
votes
0answers
19 views

systemctl script not able to read and write

I have a script running at start up using systemctl. Shown below. The script that runs just reads and writes data from a txt file. [Unit] Description= Start sample script After=local-fs.target ...
0
votes
0answers
148 views

Graphical UI stops working shortly after boot [Linux Mint 17.3]

I recently updated to Linux Mint 17.3 Cinnamon 64-bit from 17.2 through the update manager. Upon reboot everything was in working order so I decided to update the kernel as well which was probably ...
0
votes
0answers
59 views

Run mate-terminal on startup as root without password

I am using Linux Mint 17. I want to run mate-terminal on startup as root without need to type password (I want it to perform automatically) and execute python script in it without closing terminal ...
0
votes
0answers
19 views

Run tpb at login or startup and have it continue in the background (Debian+LXDE)

I'm trying to have tpb automatically, actively running when I'm logged in. I'm not sure when it needs to be run to continue on in the background after the GUI's started and I've logged in. The ...
0
votes
0answers
35 views

Restart service after boot then enable networking ordering

Problem: Server application when first started upon boot has memory leak. When service is restarted, it will then run without issue. Temporary solution is to: AFTER the OS has completed booting, ...
0
votes
0answers
32 views

Why are Dolphin and Konsole running automatically in Linux Mint (Ubuntu-based, KDE)?

They are in fact running on each system boot and in double instance, even if I close all the instances before shutdown. I checked /etc/xdg/autostart/ and ~/.config/autostart/ but there are no ...
0
votes
0answers
46 views

Autostarting shell applications using Startup Applications Preferences?

In gnome I run "Startup Application Preferences". After that I press add and in comamnd field I write: logkeys --start. However, logkeys doesn't auto start. How to fix it?
0
votes
0answers
23 views

systemd script to enable/disable gnome shell extensions depending on connection status

As subject, I would like to write a systemd script which runs at startup and disables the weather shell extension if the laptop is not connected to the internet. When the system shuts down, it should ...
0
votes
0answers
41 views

How can I automatically minimize all startup programs?

I have set around five programs to run at startup and it's annoying when they take all my screen space. The worst offender is probably the Steam client that starts in fullscreen mode. How can I ...
0
votes
0answers
146 views

Is the slow start of Linux Mint caused by my ATI Radeon Graphic Card?

I have recently installed Linux Mint (Linux OS based on Ubuntu 14.04) but I have encountered some problems. Every time before Linux Mint starts, it does show me this error on the black screen: ...
0
votes
0answers
78 views

irexec not starting at boot - LIRC

This code is in a shell script that starts up on boot /usr/bin/irexec /root/.lircrc -d The other sections in the startup script work, so the script runs ok. When the command is executed manually ...