the startup sequence, from the time the kernel goes live to when all services are up and running

learn more… | top users | synonyms

2
votes
2answers
22 views

Adding permanent routing

Each time when I start my computer I type in the console sudo route add -net xxx.xxx.xxx.xxx netmask 255.255.240.0 gw xxx.xxx.xx.xxx When computer is rebooted or switched Off/On I must re-enter ...
1
vote
3answers
9k views

Debian not booting into GUI

My problem is, that my Debian installation shows a grey screen on start up and boots into a console, instead into gnome. When I start X manually with startx everything starts fine, so the DE seems to ...
0
votes
0answers
71 views

Run console printing command after tmux starts up

I'm starting tmux from zsh with the window split into two panels. The only issue I'm having is screenfetch starts up and prints to both windows. Ideally I only want it printing on the left window. I ...
6
votes
1answer
8k views

service to start on boot doesn't work with update-rc.d comand

I have installed redis server on my ubuntu based server, so I can start/stop/restart redis server, the redis_server.sh is already in the /etc/init.d. Now I want to make redis start on boot, I ...
10
votes
3answers
5k views

How to change timeout in systemctl

When I boot on my debian, startup hangs for approx 2 minutes on the line: Loading, please wait... [ 5.191043] systemd-fsck[129]: /dev/mmcblk0p2: clean, 234192/873120 files, 2335263/3491328 blocks [...
1
vote
0answers
15 views

Why can linux not see usb devices present on startup?

I am trying to run linux (tails, which is based on debian) on a laptop (Lenovo 11.6 Inch Ideapad 100s) from a live usb drive. However, once I get past the boot menu, the mouse and keyboard stop ...
1
vote
2answers
50 views

Mount root filesystem from initramfs

It's a common scenario. For whatever reason, the initramfs (OpenSUSE, in case it matters) has failed to find the root filesystem, so it drops you into a rescue shell. I know perfectly well what device ...
1
vote
0answers
14 views

/etc/network/interfaces automatically startup pppoe on wireless lan (wlan0) on boot and also make it persistent

I do have the following setting OK in /etc/network/interfaces: auto wlan0 auto dsl-provider iface wlan0 inet static address 192.168.XXX.XXX netmask 255.255.255.0 broadcast 192.168.XXX.255 wpa-ssid ...
3
votes
1answer
67 views

Why is my script not waiting for networking service to start before running?

I am using Debian 8 and have configured a script and put it under /etc/init.d directory as below. Basically, I want to open ssh tunnels on startup. #! /bin/sh # /etc/init.d/open_tunnels ### BEGIN ...
0
votes
1answer
26 views

Run script simulatneously with loading desktop

I am running Kali 2, and have a script that I want to run on startup. Right now, I have the script in my profile.d directory, but it takes too long to execute. The effect is that after I login, the ...
1
vote
1answer
2k views

Starting Tomcat Service when starting CentOS/RHEL/Fedora

I want to install tomcat 8 and run it at startup time I am following these tutorials: Install Tomcat 7 on CentOS, RHEL, or Fedora How to install Tomcat 8 on a CentOS 6 VPS I created the tomcat ...
5
votes
2answers
1k views

How to permanently disable root-password prompt for recovery mode, RHEL7

Note: I asked a similar quesiton concerning version 6 of these bundles here. Note that 7 uses systemd and may have a different implementation In the rare cases that a RHEL or CentOS 7 system is ...
3
votes
0answers
68 views

unable to install anything using apt-get because of insserv

Whenever I try to install something using apt-get I get the error messages involving insserv. I have tried install many different packages but everything give same error. And apparently, CUPS package ...
1
vote
1answer
31 views

Run a script after login that prints to the terminal a welcome message?

I want a script that writes to the terminal a welcome message (something like echo "welcome, usr. Linux version..." etc). I have the script written, it works (i.e. it has execute privileges) so I know ...
1
vote
1answer
1k views

Cannot add startup service to openWRT from init.d

I have openWrt installed on a TP-Link TL-WA901N/ND v3. I don't have luci package installed because I don't have enough space, so I can only do thing via cli. What I'm trying to achieve is to create a ...
0
votes
1answer
50 views

How to lump together Apache2 Server and xsp2 server in the configuration for auto start when the PC reboots?

We need to lump together Apache2 Server and xsp2 server(or mod-mono-server server) in the configuration for the auto start sample shown below when the PC reboots. Quoting from the article, http://...
1
vote
0answers
330 views

How can I enable ufw automatically on boot?

sudo ufw enable Firewall is active and enabled on system startup sudo ufw status Status: active But after I restart the system and run sudo ufw status, I get the message: Status: inactive How ...
0
votes
0answers
13 views

Ubuntu Gnome stuck in startup(gnome logo) sometimes

I pick a(successful startup) and b(fail to start) dmesg file, hope someone can help me differ the file and find out why sometimes my ubuntu system fail to start(it frozen before login interface ...
3
votes
1answer
641 views

Startup problem: invalid partition table or use UEFI BOOT

I'm working on a Dell Latitude E5430. Recently I booted pcbsd from USB using this file: PCBSD10.1.1-RELEASE-01-31-2015-x64-DVD-USB_0.iso But I guess I did something wrong. I was trying to install ...
1
vote
0answers
19 views

Rotate Display at Startup

So I'm trying to rotate the screen upside down at startup because the screen I'm working must be upside down. I'm working with a game emulation OS called Lakka, so I can't use "xrandr" to flip it. So ...
0
votes
1answer
3k views

Runtime parameters for a systemd service

I am a little confused about how runtime parameters are normally supplied to a systemd service. The general idea I have is that the following happens: There is a file that contains the environment ...
3
votes
1answer
29 views

How to delay a program from starting on boot up - Xubuntu

I am running Xubuntu and have several programs automatically starting when the computer powers up. All the programs starting at once is causing me issues with having the programs talk to each other. ...
3
votes
1answer
28 views

PC with short-lived RTC battery - how to immediately time-sync on boot and avoid time jumps

I've got a 64-bit Intel PC running Debian 8 with a capacitor-based clock, which means after 3 days without power the time is lost from the hardware clock. To help work-around this, I was thinking we ...
6
votes
2answers
996 views

What is causing a pause during the system device probe?

I am running FreeBSD 10.0-RELEASE. During the boot device probe there is a two-times 30 second pause. The output relevant to this is # dmesg ... (aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 ...
1
vote
1answer
26 views

Cannot write to /etc/fstab in maintenance mode

I am using Oracle Linux 6.5. Due to bad entries in /etc/fstab, fstab errors occurred on startup and I am unable to log in. It's asking me for the root password to enter maintenance mode. When I enter ...
1
vote
2answers
759 views

Combined su and screen at startup

I want to start a long running custom script at boot. The script must run under a specific username. So far I have successfully used the screen command and switched to the user in the custom script. ...
0
votes
1answer
2k views

Unable to mount root fs over NFS

I am attempting to set up the first (of many) Raspberry Pis running Pidora (a Fedora Remix) to boot from an NFS share. It is my goal to eventually place a dozen or more Raspberry Pis in the datacenter ...
6
votes
1answer
176 views

How to pause (or capture) the messages that fly by at the end of startup sequence?

Towards the end of the "startup sequence"1, I see a longish series of diagnostic messages fly by very quickly, right before I see the login prompt2. AFAICT, most, if not all, of the lines making up ...
3
votes
3answers
6k views

syslog-ng service not starting with systemd but command works fine

I have a freshly installed version on CentOS 7 once which I have installed syslog-ng from the EPEL repositories. ~: yum list | grep syslog syslog-ng.x86_64 3.5.6-1.el7 ...
0
votes
1answer
30 views

Systemd pause boot while script runs

I have a script that I want to run at boot, and whilst it runs I would like it to pause the boot process. I have tried the systemd service [Unit] Description=setup script Before=default.target [...
0
votes
1answer
2k views

Indicator-cpufreq doesn't start on login

If I run indicator-cpufreq in the console it will start up just like it is supposed to and appear in the panel. However, if I place the same command in the startup programs it doesn't appear on ...
3
votes
1answer
3k views

Resetting password in Linux Mint when disk is encrypted

I have a system (VM, actually) with Linux Mint 15 on it. The disk is encrypted, but I remember that password -- just not the password for my account. I've tried changing the command in GRUB from ro ...
0
votes
0answers
10 views

XBMCBuntu is not starting up to desktop

I am running xbmcbuntu for a few years now and everyting worked fine so far. Recently, I've installed a new hard-disk and made a new partition (sdc1) on it. Now, unfortunately, XBMCBuntu is not ...
1
vote
2answers
55 views

systemctl .service file not working as expected

I am working with the service files in Centos 7 and am creating one for xymon. The issue I am running into is I am trying to configure start, stop, and restart. I went as far as using an existing ...
1
vote
0answers
20 views

El Capitan 10.11.15 can't set disk with OS as startup disk, only boots if I reset nvram

Mac Pro (Mid 210) Since installing El Capitan on new HGST 6T drive I can ONLY boot this system by resetting NVRAM. If I try to restart I get apple, progress meter, then circle with line through it ...
2
votes
1answer
66 views

Debian (jessie) with XFCE, Sessions and Startup: Application Autostart

Long-time lurker, first time question-asker. I am running Debian jessie with XFCE, kernel 3.16.7. In the course of setting up Conky to run at startup, I wrote a bash script to... well.. run Conky. ...
0
votes
1answer
27 views

Custom scripts under /etc/profile.d and /etc/init.d - rhel6 and rhel7

I need to start my script during boot time. I have read that the scripts under /etc/init.d & /etc/profile.d are sourced during system startup. How different are these directories? Other than the ...
1
vote
0answers
51 views

scp and rsync not working when executed within .sh files from “startup programs window”

With Ubuntu Mate 16.04, I have a file my_backup.sh like this: # Log just for trying echo $(date) >> /home/albert/dia_hora # BBDD NOW=$(date --date="yesterday" +"%d") FILE="...
1
vote
1answer
41 views

xkill Used On Desktop

Mouse accidentally clicked on Desktop while active with an xkill terminal command. Which makes it completely without use. Have used nemo command which resets everything as long as terminal remains ...
1
vote
0answers
38 views

Different mount output with and without initramfs

I need to create an initramfs to load a driver to access EMMC which contains the root filesystem. In my current kernel build, the EMMC driver is modular (sorry, can't change this). After the ...
0
votes
1answer
39 views

rc.local can't launch my program (raspbian linux)

I have a c++ program that is running perfectly fine if I run it by executing, sudo /Morreels/./launcher Sadly the same line (without sudo) won't work in the rc.local file on startup... When trying ...
1
vote
0answers
20 views

lubuntu reduce size of vmlinuz file for PXE boot

I have poor knowledge about Linux systems, but Windows XP support is over. I have two older computers. I want install Lubuntu from PXE on this computers, but the problem is that they says "NBP is too ...
5
votes
2answers
6k views

How can I start Apache on Arch Linux w/systemd using passphrase protected SSL keys?

I'm relatively new to using Arch Linux and think I must be missing the obvious way to do this correctly, but –short of starting the daemon on my own– I can't figure out how to get passphrase protected ...
0
votes
0answers
23 views

I'm able Start Service With init.d script, however doing service <service name> start does not work

I'm able to start a service with an init.d script, however doing service <service name> start does not work. For e.g. /etc/init.d/haskal start, the service is starting fine and service haskal ...
1
vote
1answer
37 views

Arch bootup: network.target takes a long time to start [closed]

As it was discussed at another post here a process is blocking the boot sequence, so it takes really long to start up. Login via mosh (ssh replacement) is possible after 1:30 min. Here is my output ...
10
votes
3answers
1k views

Boot into a chroot?

I have Linux (Debian Jessie) installed on a hard drive. Drive - sda1, ext4fs, and sda2 - swap I have a /chroot folder. There is installed another system, in /chroot folder. Question: How to tell ...
1
vote
1answer
37 views

How do I automatically execute `netctl start tq84-wifi` on bootup?

I have configured a wifi connection in /etc/netctl/tq84-wifi in a Arch Linux installation and am able to manually start it with sudo netctl start tq84-wifi. Now I'd like to have my installation start ...
1
vote
1answer
314 views

How to execute shell script on Kali Linux startup?

I need to execute a shell script on a Kali Linux startup. I am using 2016.1 version of Kali Linux. i tried many things like rc.local, init.d, X11 and GDM3 config etc. but I couldn't get it work. ...
5
votes
1answer
2k views

rc.local with read will not echo key strokes

I'm using CentOS 6.4 and have a small problem with using read in /etc/rc.local file. It will allow keyboard entry but does not echo any of the key strokes during input. This is something that worked ...
0
votes
0answers
18 views

custom bootup/shutdown message

I am using Debian. I set my own image during boot (so no boot messages are visible). When I start PC my own image is shown, then approx 15 seconds black screen is visible and after that it shows my ...