An SSH tunnel provides an encrypted channel based on the SSH protocol.

learn more… | top users | synonyms

0
votes
0answers
85 views

SMTP traffic being forwarded through SSH even do AllowTcpForwarding is disabled

I have a situation on one server, where it seems to be spaming over traffic being sent over SSH tunnel. Output below shows connections being made to remote SMTP server that seem to be initiated over ...
2
votes
1answer
409 views

Does `ssh -D` proxy DNS request?

Is DNS resolution tunneled to the other end when I use a SOCKS proxy created with ssh -D? I have read the manual, searched the Internet, and found no documentation relevant.
1
vote
1answer
88 views

How to ignore “Unable to connect to target host” error messages

I am using an SSH tunnel. It works fine but it gives me these messages regularly: channel 5: open failed: connect failed: Unable to connect to target host channel 4: open failed: connect failed: ...
1
vote
1answer
160 views

Ubuntu 14.04 I can't get SSH tunneling to work with -g switch?

I'm running this command on myServer: ssh -g -p 9922 -f myuser@serverOnOpenInternet -L 1212:serverBehindFirewall:80 -N serverOnOpenInternet runs sshd on port 9922. (not my call) Once I run the ...
3
votes
3answers
20k views

sshd_config MaxSessions parameter

I have problem with "MaxSessions" parameter in sshd. I would like to restrict number of sessions via one ssh connection. For example for tcp forwarding. When I set MaxSessions to 0, logons are not ...
1
vote
1answer
1k views

Setup SSH tunnel on existing connection from script

I want to establish an SSH tunnel on an existing connection. The tricky part is doing it from a script (a custom shell I need to allow users only some specific things, like setting up this tunnel). ...
2
votes
1answer
57 views

Is sshd_config TPCKeepAlive still using unencrypted channel and therefore vulnerable

This post from 2008 in ubuntuforums recommends disabling TCPKeepAlive Disable TCP KeepAlive messages. These messages are spoofable and are sent outside of the encrypted channel, and ...
4
votes
3answers
401 views

How to browse a website as if I am in USA? [closed]

I am in Taiwan right now and whenever I go to a website that I could browse in USA, it directly transfers me to the Asia site. There is no way to browse the USA version of the site, probably because ...
6
votes
1answer
1k views

Run SSH SOCKS5 proxy on system startup

I want to setup a linux server (Ubuntu Server 14.04 in this case) to be used as a SOCKS5 proxy by software on another client. Now this is pretty easy by running ssh -f -N -D 0.0.0.0:1080 localhost as ...
4
votes
2answers
671 views

sshfs over mosh tunnel

I am using sshfs over ssh tunnel. The reason for this is because I do not have direct access to machine from which I want to mount file system. This command establishes me tunnel: ssh -o ...
1
vote
1answer
69 views

Tunnelling through multiple machines on Red Hat with varying users and keys

I'm trying to SSH tunnel hop to a Tomcat7 server where JMX was configured on port 9090. Essentially: localhost > hostB > hostC. In a terminal, from localhost to hostB: ssh -L 8989:localhost:...
2
votes
0answers
69 views

user@localhost password not accepted when ssh-ing through a tunnel [closed]

I am trying to log into a workstation through another server, following this guide http://serverfault.com/questions/53080/how-to-enable-ssh-x11-forwarding-through-additional-server Step 1, connecting ...
0
votes
0answers
159 views

Accessing forwarded port via SSL/TLS

I have a Raspberry Pi that sets up an SSH tunnel with my VPS so that I can access several things remotely. My Pi forwards its local port 80 to my VPS's port 3180, so I can access it via http://domain....
2
votes
1answer
1k views

How to create reverse dynamic ssh port forwarding

I'm trying to set up an ssh tunnel layout where: client A (not ssh-server enabled) initiates ssh connection to server S socks server is opened on server S:yyyy that tunnels all data via client A ...
1
vote
0answers
135 views

It is possible to make an IPSEC VPN Bonding?

I wanted to know if It is possible to bound two IPSEC tunnels ? I've already done a VPN bonding of SSH tunnels, but It will be better if I use IPSEC.
2
votes
0answers
248 views

Tunnel audio chat over ssh

I'm running a HelpDesk for internal call center employees. Right now, we can chat with employees over our web portal and remote-control their Linux Mint workstations via VNC over a secure SSH tunnel. ...
2
votes
2answers
561 views

How do I route a spare network interface through an SSH tunnel?

I just bought a Raspberry Pi and I am wanting to route an ad hoc wireless network interface fully through an SSH tunnel that was created using another wireless interface. I want to do this so that I ...
0
votes
1answer
61 views

What's the diference between a SSH tunnel and a VPN? [closed]

What situations do I have to use one in detriment to the other? I believe that both serves for the same situations at the most of the case, isn't?
0
votes
1answer
263 views

How do I tunnel traffic through a VPN and then through another machine

I recently started working from home using a laptop (A) that connects to a corporate network over a VPN. The VPN end point (B) on the corporate side then has two ports, 3389 for RDP and 22 for ssh, ...
0
votes
1answer
97 views

SSH Tunneling does it multiplex?

I'm writing an application which will be doing something similar to SSH tunnelling (port forwarding and reverse port forwarding). However, SSH will not be involved at all, hence why I'm not using any ...
5
votes
2answers
385 views

ssh tunnelling explanation

I have a question regarding ssh tunneling. I've read this article http://www.popcornfarmer.com/2009/01/ssh-tunneling-tutorial/ I would like to make X forwarding work and run some X applications ...
1
vote
0answers
162 views

Mounting nfs4 partition over ssh tunel

I am following this manual on how to mount an nfs port over an ssh tunnel: https://blogs.oracle.com/shepler/entry/tunneling_nfs_traffic_via_ssh I need this because I want to mount an nfs partition ...
1
vote
2answers
187 views

How do I prevent just 'exit' from being saved when I close an SSH connection?

When searching for a way to do this on Google, all I can find are ways to quit the session without saving history (like kill -9 $$), but I have the opposite problem. I want to save all of my history, ...
4
votes
4answers
3k views

Is there a way to have regular expression in ~/.ssh/config

I have two set of server. Test on production. All server have internal ip. currently I am using alias to login: Host pro-10 Hostname 192.168.1.10 ProxyCommand ssh production-server nc %h %p For ...
1
vote
0answers
30 views

Appearing to be on the same network

I have a user that needs to connect to a machine located on a private network at another facility. Basically 192.168.0.20 -> 192.168.0.1 -> Internet -> 192.168.1.1 -> 192.168.2.1 -> ...
2
votes
1answer
352 views

Port forwarding for VPN connection

I'm using a public wifi hotspot. Usually when I connect to these, I immediately connect to my college VPN. On this hotspot, only browsing works (no program other than a browser seems to be able to ...
1
vote
1answer
99 views

Automating setup of the SSH tunnel

I need to frequently login to many machines but I can only login to them from a proxy machine or using an SSH tunnel (by tunneling through that proxy machine). The problem is that I cannot use ...
1
vote
1answer
69 views

How can I configure Linux to reopen my SSH tunnels after the connection has been restored?

I am currently working with some SSH tunnels configured. Many times when I loose connection to the Internet or hibernate my laptop, I need to reconfigure the tunnels (i.e., do killall ssh and then set ...
3
votes
1answer
195 views

SSH Tunnel with autossh

I can't seem to find a close enough example but here it goes. I'm trying to in the end setup rsync from one server to another through an ssh tunnel. Local (my machine) will run the rsync to pull ...
1
vote
1answer
302 views

killing tunnels for a user connected with ssh -N

I created a forward only ssh connection with the following: ssh -i id_rsa -o TCPKeepAlive=yes -o ServerAliveInterval=10 \ -N -n -R 127.0.0.12:8888:127.0.0.12:8888 fwduser@192.168.1.201 Mow, ...
1
vote
0answers
130 views

UDP Tunnel via SSH Confusion

Overview: I have a software program which communities on UDP port 1046 and I am hoping to hook two computers together. Laptop (Required to ALWAYS have VPN connection) Desktop (Public ip address) ...
0
votes
1answer
211 views

One liner to ssh into a server, specifying an intermediary to tunnel through [duplicate]

At my company, In order to SSH into anything, I first have to SSH into an intermediary server like so: (me@local.machine) ssh intermediary.server.com (me@intermediary.server.com) ssh application....
2
votes
1answer
416 views

SSH fork kills connection

I am using a linux script which has the task of forwarding control of the system to remote support. In this script one of the commands is a ssh port forward command that will forward the port of the ...
0
votes
0answers
11 views

SSH tunneling error: “channel 1016:: open failed: administratively prohibited: open failed” [duplicate]

when I use config file in the /home/username/.ssh/config to connect to localhost with ssh, I get the following results: channel 1016: open failed: administratively prohibited: open failed channel ...
1
vote
1answer
1k views

Logging in through ssh tunnel with rsa key still giving password prompt

I have two laptops (Host A and Host C) with dynamic IP addresses and one desktop (Host B), all of which are running (Ubuntu) Linux. Right now I have things set up so I can access Host A from Host C as ...
0
votes
1answer
241 views

Hop scp and sshfs using ssh tunnels

Here's what I have: A desktop and a laptop both behind a firewall, both of which can connect to an ssh capable server. Here's what I can do: Create a tunnel from server to desktop by running this ...
0
votes
1answer
786 views

How can I use SSH to tunnel Minecraft clients to my MineOS server?

I have a MineOS Turnkey server running on my university's network and its locked behind their firewall. I have been able to connect to their Linux servers using SSH and then SSH to my server from ...
5
votes
4answers
4k views

SSH tunnel hanging

I'm trying to use an SSH tunnel from home to a computer in the university so I can access some articles. Both machines are running Ubuntu 11.04, the university machine runs openssh-server. I my ...
1
vote
0answers
297 views

SSHD_CONFIG keeps corrupting on reverse SSH setup

I have a reverse SSH setup to traverse an impenetrable CGN NAT. It works well, but the SSHD daemon on the client behind the NAT keeps dieing for unknown reasons (fails to start-up). The client ...
-3
votes
1answer
93 views

ssh tunel how to?

ok I have a following situation. machine1 , machine2 and laptop. I need ssh and scp protocol enabled such that I can access to machine1 and do some things there. also i cannot access to machine2 ...
1
vote
2answers
139 views

SSH Tunneling Through a Firewall to a Cluster

I work at a university but I often work remotely. There is a cluster computer at the university that I need to be able to interact with, but its behind a firewall. Let's call the firewall F and the ...
1
vote
1answer
73 views

Using SSH to allow Internet access

I have two hosts running on separate networks; A win7 machine and a Linux machine. Firewalls on the win7 subnet does not allow access to Internet resources, but it allows access to the Linux machine, ...
2
votes
1answer
57 views

Programatically / dynamically adjust SSH session port forwards

I have a workflow where I am trying to do the following: For a given existing SSH session, access the remote machinne and perform a process from which a port is returned (e.g. a remote daemon has ...
1
vote
1answer
10k views

SSH tunneling fails with “administratively prohibited: open failed” [duplicate]

I am trying to connect to internet via a server in local network. I don't have permissions to change server configuration. I want to do a ssh tunnel to that server and via that using socks proxy, I ...
2
votes
3answers
934 views

Copying a file using SSH over a tunnel with cert forwarding

I need to find a way to copy files from mymachine to a server priv-server sitting on a private NATted network via a server pub-server with a public IP. The behind-NAT machine priv-server only has ...
2
votes
2answers
368 views

run a local SOCKS proxy tunneled through SSH

I was going through this post and couldn't quiet follow what is being implied there. A great "feature" I use every day at work: The ability to have SSH listen on port 443 so I can create a ...
2
votes
1answer
490 views

SSH over corkscrew and proxy get “ssh_exchange_identification” error

until few days ago I was able to connect to my remote ssh server, using corkscrew to tunnel the connection through the corporate proxy, with this simple configuration: ssh -v root@xxx.xxx.xxx.xxx -p ...
7
votes
2answers
876 views

Determine dynamically allocated port for OpenSSH RemoteForward

Question (TL;DR) When assigning ports dynamically for remote forwarding (a.k.a. -R option), how can a script on the remote machine (for instance sourced from .bashrc) determine which ports were ...
12
votes
3answers
6k views

How to bring back SSH session that was started with the -f option (run in background)

I'm pretty lost on this. From the man page: -f Requests ssh to go to background just before command execution. After starting SSH with the -f option, I have a working tunnel. But after I ...
0
votes
1answer
491 views

Specifying a random monitoring port with autossh

I have many reverse ssh tunnels and because monitoring ports can't be reused, I am trying to find a free random port for monitoring. Meanwhile I specified -M 0 and the forwards work great and in ...