1
vote
0answers
32 views

How to install clang?

I have downloaded the "Clang for x86_64 OpenSUSE 13.1" (I am on Scientific Linux) pre-built binary from here: http://llvm.org/releases/download.html (Should I have got the Fedora one??) and I ...
1
vote
0answers
32 views

Setting XDG_DATA_HOME and XDG_CONFIG_HOME on compile/per program

The goal is to have a -dev version and a stable repository-based version installed at the same time, but with different data and config directories so that the dev version is not operating on(and ...
18
votes
4answers
1k views

What is the difference between building from source and using an install package?

It was wondering: when installing something, there's an easy way of double clicking an install executable file, and on the other hand, there is a way of building it from source. The latter one, ...
1
vote
2answers
22 views

Compile source with later libraries on one server and use the binary on an older server

I may have a noob question regarding the compiling software from source. I need the latest libpcre3-dev library to compile a software from source, however, the current distribution of the OS (Ubuntu) ...
1
vote
0answers
18 views

crlibm Library Installation Problem

I am trying to install crlibm using the installation instructions, which is as usual: ./configure make make install Then I get the following output: Making install in scs_lib make[1]: Entering ...
0
votes
1answer
51 views

Unable to build id3lib on Crunchbang

I'm trying to install id3lib in my new Crunchbang distro. So, I downloaded the tar.gz file and executed configure command which ran good. And when I run make I'm getting the following error: make[2]: ...
0
votes
1answer
32 views

Where is <libraryname>.pc?

When installing a library with configure, make and make install, does make install copy <libraryname>.pc to some place? If yes: Where is it? If no: Should we copy it somewhere rather than ...
2
votes
1answer
54 views

Compilation error on Ubuntu

I'm trying to install the driver of the probe IPEH-00202242179, I downloaded an installation file with the following commands: $ cd peak-linux-driver-7.9 $ make clean $ make $ su -c "make install" ...
4
votes
1answer
108 views

Is building Perl an inside joke or is it supposed to require this many `make` invocations?

So I am building Perl version 5.18.2 from source on an ARMv7 processor right now, a Krait on the Snapdragon S4, and I am not too sure how much support there is for such an architecture. By the way, I ...
1
vote
2answers
599 views

Cannot install libevent on CentOS 6.5

I'm on CentOS 6.5. Specifically, I'm running this AMI: Adobe Media Server 5 Extended. I followed these steps: $ sudo yum groupinstall "Development Tools" $ sudo yum install glib2-devel fuse-devel ...
1
vote
0answers
258 views

Installing openambit on Ubuntu 12.04

My question is in regards to installing openambit which is software for Suunto's ambit watch. I followed the installation instructions here but it didn't work. When I did: $ mkdir libambit-build $ ...
1
vote
1answer
122 views

Why does PyCrypto require a C compiler?

Is there a python crypto library that does not rely on anything besides python? Or pre-complied bundles of PyCrypto for Linux?
0
votes
0answers
188 views

Yocto project installation error

I installed the Yocto project in Ubuntu 12.04 desktop. I followed steps what they given in the yocto website Supported Linux Distributions. $ sudo apt-get install gawk wget git-core diffstat unzip ...
0
votes
2answers
256 views

specify PREFIX location when running make

I need to install redis 2.8.x into a specific directory so I can later use fpm to create an rpm. From my research, it seems that this should be possible by using make PREFIX= mkdir /tmp/installdir ...
1
vote
1answer
739 views

Install kernel module [V4L2]

In order to build and install V4L2 module, do I have to download it, or it is already part of the kernel (and all I have to do is to choose it, in order to build it, via kernel configuration)? I 'm ...
0
votes
1answer
70 views

Compiling Netcat with DFLAGS [closed]

I've been trying to compile netcat so that I can use the -e option but I am not sure as to how or where to place the custom flags. So far I've done: ./configure Make and then I edit the Makefile ...
0
votes
3answers
135 views

Why does `make install` not produce an rpm?

A little Preface: I'm unable to copy+paste between my Windows PC and a Linux machine that I'm viewing through VNC Viewer and yes the Share Clipboard option is enabled in VNC Settings. Thus I came ...
4
votes
4answers
87 views

When should one compile and install from source?

To install software on a Linux system, many tools like yum, apt-get, rpm, dpkg and so on are available to either fetch a package from a repository or install a downloaded package. Alternatively, it ...
2
votes
0answers
143 views

Binutils documentation compilation problem

I'm trying to compile and install binutils+GCC for my machine on my own. I have compiled lastest binutils sources without getting any error, but installation seems to have some problems with gas ...
1
vote
0answers
293 views

How to compile and install iperf on a MIPS based router?

I have a DIR-825 router based on Atheros AR7161 (MIPS) running DD-WRT v24-sp2 std. How can I compile and install iperf on it? Can I compile it directly on the target device, or do I have to cross ...
2
votes
2answers
222 views

Where are my ALSA, pulseaudio lib

I tried to install darkice with lame. To compile it, I need ALSA and Pulsaudio: checking for lame library at /usr ... found at /usr checking for vorbis libraries at /usr ... configure: WARNING: not ...
10
votes
1answer
276 views

How do I apply software patches?

I have an application foobar for which someone has written a patch to add a feature I like. How can I use the patch?
2
votes
2answers
130 views

netcdf installation and usr/local… folders

I need to install netcdf on a SuSE Linux machine but I am having a few problems understanding the usr/local/ folders and my the myusername/local/ folders. What I think I need to do is go into the ...
2
votes
2answers
61 views

How do add GNU findutils into an existing location

I have installed the GNU "core" utilites coreutils-8.21 into this location on my UNIX server: /opt/app/p1sas1c1/apps/GNU I would now like to ADD the findutils-4.4.2 package. My reading the INSTALL ...
4
votes
2answers
121 views

Does Debian have any kind of virtual environment for make install?

If someone used a Python virtualenv he knows we can run scripts in its own environment installing all necessary libraries which won't impact main python distribution. Do we have something similar in ...
2
votes
0answers
2k views

Error building Oracle client 11g R2 on RHEL 5.5

We are trying to install oracle 11g R2 64 bit in Rhel 5.5 machine ( 64 bit ). Kernel version is 2.6.18-194.el5. We are getting the below error while installation. error in invoking target 'mkldflags ...
3
votes
1answer
866 views

Error while loading shared libraries after installing a program

I was installing rfc5766-turn-server. But it fails to launch with an error: error while loading shared libraries: libevent_core-2.0.so.5: cannot open shared object file: No such file or directory ...
2
votes
2answers
345 views

Installing Gnome on FreeBSD

I am trying to install Gnome on a freshly installed FreeBSD using the ports. I am stuck with an error message that says: Checking for headers required to compile python extensions ... not found Then ...
0
votes
1answer
81 views

Specifying local install directory for ./configure for pango-1.32.6

I have built cairo-1.7.6 for use in building pango-1.32.6, and I have installed it to a directory in my home directory: /home/me/local/cairo-1.7.6. Under this directory are the expected include, lib ...
5
votes
2answers
163 views

Emacs on OpenBSD for DEC VAX?

I have managed to install OpenBSD 5.2 on my DEC VaxStation 4000 Model 90 but to my surprise have not found a binary for Emacs (any version) for the VAX architecture. As best as I can tell I do not see ...
1
vote
1answer
114 views

Yarbu Execution

I am attempting to use a Project called Yarbu It appears to be exactly what I am looking for. However I am a noob at Linux and am having difficulty getting it to work. I successfully completed the ...
2
votes
1answer
145 views

Compile a program without sudo access

I am connected to a linux system with SSH in my college. I found that ctorrent is a console alternative of bitorrent. I have downloaded the tar.gz source but to compile/install it needs sudo access ...
-1
votes
2answers
3k views

Building Qt: 'make clean' causes everything to get recompiled?

(This applies to Qt versions >= 4.7.3.) I made an attempt to build Qt with custom parameters on my Debian box and it actually took AGES to compile (IIRC more than 6 hours on a single-core CPU). That's ...
3
votes
3answers
310 views

New source install over existing one

I have Slackware installed on my computer, and I install a lot of software from source. Now I want to install ffmpeg from source just to recompile it with some more options. But I already have ffmpeg ...
6
votes
3answers
328 views

Effect of compiling from source on already installed applications

I use Ubuntu 12.04. Say I have installed package x from the repository (with all its dependencies) at version 1.7 but I need some functionality that is only available in version 1.8, so I download the ...
2
votes
1answer
2k views

Adding ssh on embedded linux

I want to run SSH on Qtopia (on my FriendlyARM). My own distribution is Ubuntu, so I cannot copy and paste the ssh binary file into the device. If I can copy and paste a binary file, where can I find ...
2
votes
2answers
2k views

How to make apr available for subversion install?

I try to install subversion from source, but on ./configure receive: configure: error: no suitable apr found I have download apr source and installed: libraries have been installed in: ...
2
votes
2answers
170 views

How to build a tool with specific libraries without breaking Fedora?

This is probably a noob question, but so far never needed to deviate from the standard Fedora 16 core development components. I am needing to build clutter-mx project, but this library requires ...
2
votes
1answer
193 views

How should I install software from source so that I can make my configuration manageable and reproducible?

I work with a lot of scientific software on Linux distributions (normally Debian variants and Red Hat variants). In order to maximize performance and get access to the latest features, it's often ...
1
vote
3answers
3k views

Can't install pg gem

I cant get the pg gem to install. I have tried --with-pg_config and it didnt work. Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. ...
4
votes
2answers
13k views

How to solve “building the main Guest Additions module Failed”

I tried to install the VirtualBox Guest Additions module in a VM guest running CentOS but I get this error message when everything else was okay: building the main Guest Additions module Failed ...
2
votes
1answer
3k views

How to install daemontools on ubuntu or debian from source

I am installing D.J.B.'s daemontools on an ubuntu 10.04 server (64 bit). (This question is about daemontools, which is a free and open software for managing UNIX services. It is not about 'DAEMON ...
1
vote
2answers
1k views

How to copy an installed application to another computer that lacks the build tools?

On one computer I installed an application from source using configure make and make install. Now I want to install the same application on another computer that lacks gcc, make and all the other ...
1
vote
1answer
245 views

How to install rastertoezpl on Pardus?

I bought a barcode printer as Godex. I have to install its drivers. I did it on Ubuntu. However, I have some problems about it.For example: In README file: $ sudo aptitude install libcupsimage2-dev ...
1
vote
2answers
689 views

Kernel module for Cisco VPN client doesn't compile under ubuntu 10.04 LTS?

I am trying to install a Cisco VPN client under Ubuntu 10.04 LTS. In the extracted folder I type: alex@alex-laptop:~/Downloads/cisco4.8/vpnclient$ sudo ./vpn_install and there is output of activity ...
1
vote
1answer
164 views

How can I install hulahop

I cloned hulahop via git and I'd like to use it and try to run this example. I have a problem to find out how to build and install it. I also tried to install it with apt-get but I don't have this ...
6
votes
3answers
370 views

How can I build and install PL/R as a non-privileged user?

There is a postgres instance, and I have the ability to build my own instance. Using these instructions I ran: USE_PGXS=1 make which worked but then USE_PGXS=1 make install did not, with this ...
1
vote
1answer
607 views

how to Update QT 4.5.3 of OpenSuse 11.2 to QT 4.7.3?

I just installed QT 4.7.3 in OpenSuse 11.2 (which has 4.5.3). I ran configure, gmake, and gmake install, but when I check qmake's version, it's still returning 4.5.3. What should I do?
15
votes
5answers
910 views

How to compile and install programs from source

This is an issue that really limits my enjoyment of Linux. If the application isn't on a repository or if it doesn't have an installer script, then I really struggle where and how to install an ...
62
votes
17answers
6k views

Where should I put software I compile myself?

I need to compile some software on my Fedora machine. Where's the best place to put it so not to interfere with the packaged software?