Slackware is a Linux-based operating system which aims for design stability and simplicity.

learn more… | top users | synonyms

0
votes
2answers
639 views

vmware player usb device on slackware 14.0

I just installed Slackware 14.0. I installed vmware player using this command: sh VMware-$NAME-$VERSION.bundle --console --ignore-errors Which I found from this website: ...
5
votes
4answers
3k views

Volume on Linux much lower than on Windows

I dualboot Slackware64 and Windows 7. The volume under Linux when maxed seems a lot lower than when it is maxed on Windows. My soundcard chip is Realtek ALC662. Volume is set to 100% for PCM and ...
1
vote
1answer
18 views

Problems with wireless usb mouse on slackware

I have a logitech m570 mouse that I cannot get to work on slackware64 14.1. My problems began with me being unable to use "X-configure" because of an error with the amount of screens, to create a ...
4
votes
2answers
766 views

dual-monitor bugs during resolution setting

My OS is Slackware 13.37 64-bit. I have two monitors. Primary one supports 1920x1200 and the secondary one 1280x1024. I use this line to enable dual monitors in "non-clone" mode: xrandr --output ...
0
votes
0answers
25 views

recovering from loss of /etc folder

I'm running slackware 12. I accidentally deleted my entire /etc folder and I'm trying to figure out how to rebuild it. I went and reinstalled slackware 12 off the original CD's using full installation ...
2
votes
1answer
23 views

Cyrillic file names broken after upgrading Slackware

After upgrading glibc and some other libraries on Slackware instead of cyrillic names I see the garbage: | Was before | Is now | |------------+------------------| | Вождение | ...
1
vote
0answers
44 views

How to reduce temperature of my Toshiba with Slackware?

I have a Notebook Toshiba with Slackware 14.1 64bits $ lspci: 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 ...
37
votes
11answers
23k views

Markdown Viewer

I found a file formatted with Markdown. Could you guys suggest what viewer that I could use to view this type of files? Hopefully one without gui (if it's possible) Update I was actually looking for ...
0
votes
1answer
46 views

unknown command “vftovp” in linux command history [ Is my linux box compromised? ]

I have Slackware linux system configured with ssh remote access. While observing the command history, I discovered that there is one unknown command executed from my linux box "vftovp". I certainly ...
0
votes
0answers
12 views

japanese input into boot console

It's possible enter japanese character in the boot console, then without start the X server? Are scim, Ibus & co. only for desktop? solutions for slackware appreciated
0
votes
2answers
322 views

Slackware 14.1 software raid kernel panic unable to mount root fs

Trying to install slackware onto a raid 1 on 2 2TB drives. I followed the official readme. I have two drives, sda and sdb. They each have two partitions, one for /(50GB) and one for /home(Rest of ...
0
votes
1answer
173 views

AMD Catalyst installation woes on Slackware

I'm trying to get my ATI graphics driver installed on my fresh Slackware OS (Zenwalk). I'm coming from Ubuntu 14.04-14.10, so I know there's a whole lot I don't understand just yet. I download the ...
0
votes
0answers
75 views

Can't boot into slackware installer

Can't boot into Slackware installer, I get stuck in this: The last line I see is: mousedev: PS/2 mouse device common for all mice I tried a external Keyboard with Mouse (Cordless but at least ...
9
votes
2answers
338 views

Laptop VGA Output Randomly Changes Name Between VGA1 and VGA2

Periodically (every few reboots by the look of it) my external VGA output on my Laptop changes name between VGA1 and VGA2. For example right now xrandr is displaying: timp@helez:~$ xrandr | grep VGA ...
2
votes
1answer
778 views

Path `/boot/grub' is not readable by GRUB on boot. Installation is impossible. Aborting

Whenever I try updating grub, I get this error: # grub-install /dev/sda Path `/boot/grub' is not readable by GRUB on boot. Installation is impossible. Aborting. and # grub-mkconfig -o ...
1
vote
1answer
90 views

[ERROR]Cannot access secondary GPU…Failed to initialize the NVIDIA kernel module [closed]

I've installed Bumblebee with Ryan McQuen's crazybee.sh script, described here, and I'm actually able to startx successfully now (because Bumblebee uses the on-board Intel graphics by default), but ...
0
votes
0answers
214 views

Slackware internet gateway with iptables / poor browsing performance

I am running a dual core headless computer as internet gateway via pppoe with two NICs. eth1 (internet interface) no ip, no dhcp eth0 (LAN interface) - 192.168.0.100 static ppp0 - dynamic ip ...
0
votes
4answers
6k views

How do I install Flash plugin for Firefox in Slackware 14.1?

I searched on Google but the tutorials I found said they had to paste the plugin in /usr/lib/firefox/plugins But this folder does not exist! Can someone help me?
0
votes
1answer
319 views

Slax boot error vesamenu.c32

I followed the instructions in the Slax documentation to download the 64 bit Slax 7.0.8 ZIP, unzipped it onto an SD card, and ran bootinst.bat to make the card bootable. This was done from a Slax ...
0
votes
1answer
956 views

NodeJS for Slackware

I want to run NodeJS on Slackware based distro named PuppyLinux. Since I am used to Ubuntu and CentOS (the simple Linux land), I found it pretty hard to find a NodeJS package to run on Slackware. I ...
1
vote
1answer
156 views

How does Slackware Login quotes work?

I'm new to Slackware and I think It's beautiful Distro. When I login it with ssh it prints motd, quote and a line for informing mail like this Linux 3.10.17. Last login: Thu Oct 23 06:28:08 +0330 ...
1
vote
1answer
803 views

Slackware, installing Flash and Chrome

I'm having trouble installing flash and chrome. When I download the sources, there are no installers for the packages. All I get is a few folders and .so files. Is there anything out there which shows ...
2
votes
1answer
105 views

Cross-compiling Slackware: is the build order listed anywhere?

I'm building a Slackware system from source and hitting a dependency wall here. (Before you ask: no, I'm not trying to "make it faster"; I'm building against a different C library.) Getting a ...
1
vote
1answer
74 views

Flash Debugger on Slackware 64

Given a fresh install of Slackware64, how can I install the 32-bit Flash Plugin content debugger in Firefox and Chrome? Reading through this question, I've got pretty close, but I'm stuck with with ...
1
vote
1answer
337 views

How do I compile the linux kernel version 3.16.1 to run in Slackware 14.1?

Could someone teach me or give me some tutorial? How do I compile the linux kernel version 3.16.1 to run in Slackware 14.1.
3
votes
1answer
608 views

Running makefile results in “/sbin/modprobe: invalid option — 'l'”

I'm trying to set up Slackware 14.0 on an Asus EEE PC Flare Series Netbook. Currently I'm trying to configure the wifi. When I enter the following: # iwconfig I get: lo no wireless ...
1
vote
1answer
244 views

Can't boot slackware after installation. Liloconfig not found

I just installed my first linux distro: slackware. The installation went fine. I followed this guy's tutorial for the setup: https://www.youtube.com/watch?v=DdwZylEQcQ0 And this guy's tutorial for ...
0
votes
1answer
322 views

Clang/LLVM Install Within Slackware?

I would like to install the Clang/LLVM compiler suite within Slackware since I use it as my default C conpiler for my C programming assignments. I am currently building it within a build directory ...
3
votes
0answers
87 views

Why do slackware packages recreate symlinks after installation?

Reading through slackware's makepkg script, I saw that rather than putting symlinks directly into the package, it deletes them and generates a script called doinst.sh that recreates them after ...
2
votes
3answers
3k views

MySQL Workbench Cannot start SSH tunnel manager

I don't know why this error is happening when I try to connect by MySQL Workbench. Cannot start SSH tunnel manager. I'm using slackware 14.1 and installed all dependencies.    
3
votes
1answer
160 views

Where is the ability to hibernate exposed on Linux?

When I boot with a resume=.. option to the kernel and an initrd built with a -h option, userland tools (say, batti) offer me the choice of hibernation; when I boot without them it does not. Where is ...
2
votes
0answers
771 views

Some sort of X.org memory leak using nvidia proprietary driver

Could please anybody help me identify what is the source of problem? The problem is that after some time or after opening a window of some application in X, it seems like I suddenly lost 2d ...
3
votes
1answer
10k views

Anyone know a good gui to MariaDB? [closed]

I'm using MariaDB instead of MySQL in Slackware 14.1, and I need a graphic manager like MySQL Workbench. Can anyone suggest me something? I tried using MySQL WorkBench but it could not connected with ...
0
votes
2answers
225 views

Making Puppy Linux more “Unixy”?

I am playing around with Puppy Linux Wary 5.3 on an old machine (Pentium PII, 160 megs RAM, 6 gig HD). I did an install on the HD. I appreciate it's light footprint, the fact that it plays nice with ...
0
votes
1answer
380 views

makehuman gives “ImportError: No module named numpy”

I installed 1.0.0 on slackware 14.1 makehuman 64bit slackbuilds through the site, but the makehuman does not open, the program appears in the KDE menu but does not open. I do not know why it happens, ...
0
votes
1answer
365 views

tsocks doesn't redirect connection

After installing tsocks using slackbuilds I made /etc/tsocks.conf by the parameters for using tor. server = 127.0.0.1 server_port = 9050 server_type = 5 Then I tried tsocks firefox to check it. But ...
1
vote
1answer
100 views

How to use one nic for storage traffic & other for network traffic in Linux(Slackware)?

Problem I have a Linux machine (Slackware) with two network interface cards and i want to use one interface for network traffic and other for storage traffic . As this is Slackware i dont know this ...
0
votes
1answer
255 views

Recovering truncated file

I'm in a peculiar situation. While editing a Perl program I accidentally truncated the file to zero length (using an Emacs lisp code I was developing). I need to recover that program... How do I that ...
0
votes
2answers
250 views

FileZilla will not start on Slackware

I think it was because I tried to install. Slackware txz 13 and mine is 14.1 64 bit, but I do not know where baicho package for Slack 14.1 can someone help me?
1
vote
1answer
379 views

Can't create partition table on SSD with Slackware 14

I'm trying to install Slackware 14 from a DVD. It boots fine from the DVD. When I try to use fdisk or cfdisk to create the Linux and swap partitions on the SSD, it complains about a missing or ...
1
vote
1answer
2k views

Install wicd on Slackware 14.1

I am trying to install wicd-1.7.2.4 on Slackware 14.1. I couldn't find configure or makefile in wicd-1.7.2.4.tar.gz. Running python setup.py configure (following the INSTALL guide) causes: sh: ...
1
vote
0answers
602 views

Skype won't start on xfce with Slackware 64 bit multilib

I'm trying to install Skype under Slackware 14.0 x64 multilib with xfce 4.10 but I get issue that I can't resolve. I have installed various versions of Skype (static, dynamic, newer, older, etc.) but ...
1
vote
0answers
606 views

Console Terminus Font Size in Slackware?

I am running Slackware 14.1 mostly from the command line on a 1366x768 monitor (using a vesa mode appropriate for the resolution, 0x34c if it matters, giving me a screen resolution of 1366x768x32 in ...
3
votes
1answer
266 views

Slackware 14x86_64, gnome 3.6 and alps touchpad scrolling settings

I have a Dell Latitude E6510 with Slackware 14x86_64, gnome 3.6 (dropline), alps dualpoint touchpad and the latest 3.11.4 kernel. My touchpad is being detected correctly and I have the touchpad ...
0
votes
1answer
74 views

How to disable SMTP Auth Plain for James-2.3.2. on Slackware 14.0?

I am trying to disable SMTP Auth plain for James-2.3.2 on Slackware 14.0. Has anyone successfully done this without changing the source code?
3
votes
0answers
687 views

Why does skype not pick up my microphone?

I've got skype running (32 bit mode) on Slackware64 — the sound is fine but my mic is not able to be detected. KMIX shows that my mic is enabled, and I can hear myself when I test it. Some ...
1
vote
1answer
288 views

primusrun not found when attempting to launch dota2 through steam

I am using slackware 14.0, and have gotten all the multilib stuff taken care of. I have skype,spotify and steam running. I have used steam to download Dota2, and when I go to launch the game I get an ...
2
votes
2answers
1k views

Does Debian guest need linux headers to install Virtualbox guest additions?

**Disclaimer, I'm fairly new to Linux ~2 years at home and, mostly, have only used ubuntu. I have salix (14.0) installed as host and would like to setup a debian(Squeeze) guest. In the process of ...
1
vote
0answers
134 views

How to disable SMTP auth plain for Citadel 8.20 on Slackware 14.0?

How do I turn off SMTP AUTH PLAIN for Citadel 8.20 on Slackware 14.0? If I set up postfix to handle SMTP would this allow me to not have SMTP auth plain enabled
0
votes
1answer
64 views

Linux fails on boot in strange way

I have restarted my machine after trying to install Skype, i have reverted changes made to etc/dbus-1/system.conf but after starting my machine i receive almost instantly stream of 99 and ...