Slackware is a Linux-based operating system which aims for design stability and simplicity.

learn more… | top users | synonyms

0
votes
1answer
136 views

How can I make monodevelop render text in KDE?

Monodevelop from git in KDE 4.10.2 does not render text in code edit tabs I tried with xfce and text is rendered ok there. I tried disabling composition with alt shift f12 and restarting x server ...
0
votes
1answer
139 views

udevadm slow boot

After I upgraded from Slackware 13.70 to 14.0, when the machine is booting, it takes it 15 seconds to execute this line: /sbin/udevadm trigger --action=add I understand, that it tries to detect ...
1
vote
2answers
464 views

Computer doesn't wake from sleep mode

I have a laptop with Linux Slackware 14, KDE 4.8.5, kernel 3.9.0-rc6. When I close the lid and pull out the power cord, the machine goes into sleep mode. When I wake it, plugging the cord back in and ...
4
votes
2answers
202 views

Strange encoding in Slackware

I am a student and learning about operating systems, I was modifying a file using vi, when I accidentally did something (I don't remember what) that change the codification/encoding and now this is ...
1
vote
0answers
74 views

How iconify xterm when it loses focus?

I am attempting iconify a xterm terminal when it loses focus in fluxbox. I am following this wiki: http://fluxbox-wiki.org/index.php?title=Make_xterm_act_like_a_PC_game_console And so far, I've got ...
3
votes
2answers
198 views

Remapping scancode for Caps Lock

In Windows I was able to set Caps Lock to act as a second Enter, which can be pressed by the left little finger. I added this parameter to the registry to do that: ...
3
votes
1answer
3k views

How to run 32-bit applications on 64-bit Slackware?

I used to use Slamd64 before, and it was easy. It came with all 32-bit libraries as well. Since official 64-bit Slackware is released, Slamd64 is no longer maintained. However, Slackware seems to be ...
0
votes
0answers
138 views

Skype hangs on Slackware when terminating the call

I have Skype 4.0.0.8, installed on Linux Slackware 14.0, kernel 3.7.0-smp+. It works, but every time when I click upon stop conversation button, skype hangs and I have to kill it. How can I debug it ...
0
votes
1answer
210 views

X doesn't work after upgrading Slackware from 13.37 to 14.0

I upgraded the system, using instructions from file UPGRADE.txt on the disk. Everything works fine. But when I try to startx, it quits with an error: ck-launch-session: error while loading shared ...
2
votes
3answers
457 views

How to retrieve dual-boot option after Windows reinstall?

Initially I had set up Slackware 13.37 and Windows 7 Home Premium dual boot. After upgrading to Windows 7 Ultimate, the dual-boot window does not show anymore so I cannot choose to boot Slackware. Is ...
0
votes
1answer
563 views

Wifi connection works but can't connect to internet

I've recently switched to using Slackware 14 on my laptop, so far I'm quite happy with the distro, except for 1 really annoying little thing: I can surf using hotspots, and all sorts of public ...
0
votes
0answers
618 views

“startx” not found in Slackware 14.0

Had been running smoothly for a while in Slackware 14 on my laptop, did full install with KDE,then after installing Tor and Vidalia, the Vidalia icon stopped working, so I restarted the computer. For ...
0
votes
0answers
95 views

All installed software/commands will not run unless root user in Slackware 14

I originally thought it was just startx, but now I've discovered ALL commands are "not found" for any user except root... I obviously haven't checked the path for every single one, but the path for ...
2
votes
2answers
14k views

How to properly install Python packages?

I run a Slackware system and I'm trying to run some Python code, but getting a lot of errors such as this one below: >>> import urllib2 Traceback (most recent call last): File ...
1
vote
1answer
567 views

Slackware 14.0 upgrade OpenGL

I wanted to run a tutorial program for OpenGL in my Slackware 14.0. It compiled well, but when I try to run it, it quits with an error: error: GLSL 3.30 is not supported. Supported versions are: 1.00 ...
0
votes
1answer
1k views

How to install wine on Slackware 14.0 using slackpkg

I am trying to install wine, using slackpkg, but it can't find it: # slackpkg search wine Looking for wine in package list. Please wait... DONE No package name matches the pattern. I can install ...
3
votes
1answer
192 views

Can I set up linux to accept a dial up connection from my old windows95 laptop?

I've got a really old laptop running Windows 95, and I'd like to be able to connect it to my home network. It doesn't have an ethernet jack, nor a usb port. It does have an internal dial up modem ...
-1
votes
1answer
458 views

How to install libssl-dev on Slackware?

libssl-dev does not seem to be installed on my Slackware server and is needed for various dependencies. How can I install this on Slackware? Searching around did not find anything and there really ...
1
vote
1answer
469 views

No network in slackware

I have just installed Slackware. I am not new to Linux but new to Slackware. I wonder how to install network in it. After the Slackware installation, audio and network were not working. This is ...
2
votes
1answer
1k views

X server problem on slackware 14 and poulsbo module (gma500)

I have installed slackware 14 on my acer aspire one za3. I cannot start the X server. Here the output of command startx xauth: file /home/emanuele/.serverauth.1984 does not exist X.Org X Server ...
3
votes
3answers
338 views

New source install over existing one

I have Slackware installed on my computer, and I install a lot of software from source. Now I want to install ffmpeg from source just to recompile it with some more options. But I already have ffmpeg ...
1
vote
1answer
970 views

How to make an entry of Slackware into grub2

I want to manually add the Slackware entry into the GRUB2 configuration file /boot/grub/grub.cfg. But the problem is that there is no initrd or initramfs present in /boot directory of Slackware. I saw ...
1
vote
1answer
1k views

Boot into chroot directory leaves the root partition read-only

I am trying to make grub boot into a chroot directory /slack containing a Slackware Linux installation. This directory was created by issuing the following command: installpkg --root /slack a/*.t?z ...
3
votes
1answer
244 views

Upgrading Slackware 13.1 to Slackware-current, is it a big leap?

I have Slackware 13.1 installed on my computer, with some software that I installed via pkgtools, slackbuilds, and compiled. I want to upgrade it to Slackware-current (13.37). Can I safely upgrade ...
2
votes
1answer
81 views

Slackware Upgrade on new release

I am about to install Slackware . Likely using Salix however a little concerned getting in st the rear end of the 13.37 cycle . If I install now and in a month anew release of Slackware occurs will a ...
0
votes
1answer
713 views

Keyboard Fn problem on Samsung netbook

I'm running Slackware Linux on a Samsung NC 110 netbook. None of the Fn keys work exept for the audio volume level keys. Currently I can control the brightness of the display with this command: ...
2
votes
1answer
4k views

How to disable DHCP (static IP)?

If I want to set my Slackware machine to have a static IP assigned from the router, how can I do so? I assume I have to disable DHCP then edit something to set the requested IP, but I'm not sure ...
4
votes
2answers
2k views

What are the reasons Slackware still refuses to include PAM?

I know that Pat Volkerding didn't include PAM back in the day when it was considered by some to be messy or inconsistent, although that doesn't really seem to be the case today with PAM being ...
0
votes
1answer
174 views

I need kernel headers for 2.6.21.5 [closed]

Preferably in slackware module format(lzm). Can't seem to find it. Can anyone help me?
1
vote
1answer
741 views

How to identify the wireless network card on my laptop?

bash-4.1# lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated ...
2
votes
1answer
653 views

Slackware boot error after fresh install

I'm currently running Ubuntu and Slackware on my system. After just installing Slackware, with everything appearing to work fine, I boot into GRUB only to see an "error: no such disk" or something of ...
3
votes
1answer
442 views

Getting started with Slackware as a web server

I'm wondering what would be the path for an Arch user to get into slackware hosted on a VPS intended to use as a web server? I like the approach that Slackware takes (like Arch), and the fact that so ...
2
votes
1answer
278 views

REISUB (Alt+SysRq+key) doesn't work on Slackware13.37_64, KDE

Under Slackware I never used the magical REISUB, and never used KDE (I don't know if it is important). But now I installed a Slackware13.37_64 with KDE, and, as far as I know, I didn't modify anything ...
2
votes
1answer
635 views

X -config Leaves a Blank Screen

In Slackware, when I use the command "Xorg -configure" to setup the X server, I get the following: (EE) Failed to load module "vmwgfx" (module does not exist, 0). (EE) vmware: Please ignore the above ...
0
votes
1answer
824 views

Install Slackware on a USB Pendrive

I have a nice, smooth flash drive which requires a mounting of a DVD ISO image for Slackware to install. For whatever reason, Ubuntu's Startup Disk Creator refuses to notice the iso, so I can't use ...
1
vote
1answer
285 views

Scribes Editor and Slackware64 13.37 — PyGTKSpell Cannot Be Found

I am trying to build Scribes in Slackware64 13.37 with XFCE and I am having a lot of troubles with the Python Binding for GTK Spell. I have gtkspell-2.0.16-x86_64-1 and pygtkspell-2.25.3-i486-3sl ...
3
votes
1answer
377 views

Fail to install perf on slackware 13.1

I was trying to install perf on slackware 13.1 When I first ran make at /usr/src/linux/tools/perf I got some errors. And I found this patch http://www.valimar.it/repo/linux/perf_fix-2.6.33.patch And ...
2
votes
2answers
733 views

How to decide on a partitioning scheme?

I am changing my current partition scheme (personal development laptop, dual boot) to remove the Windows partition and leave only my Slackware64 instance. What thought should go into my partitioning? ...
3
votes
1answer
2k views

Can't get the '-o remount' option on an NFS share to work in Slackware 13.1

I've had rsnapshot working under Slackware 13.0 for a few months. In my /etc/rsnapshot_<interval> scripts I first have it run is mount -o remount,rw then the very last thing it does is a mount ...
1
vote
1answer
731 views

Could not connect to host 127.0.0.1: Connection refused

Could not connect to host 127.0.0.1: Connection refused. - I am getting this error message on ktorrent on slackware 13.1 and the torrents cannot start. I tried to reconfigure the ktorrent prefernces, ...
2
votes
1answer
853 views

sbopkg is not working with proxy

Sbopkg used to work on my computer untill the network admin started to make a compulsory for the user to use proxy before connecting to the Internet. So, when I tried to sync to slackbuilds, I'm ...