A free software re-implementation of the SMB/CIFS networking protocol, which provides Windows file and print services.

learn more… | top users | synonyms

3
votes
0answers
18 views

Does Samba 4 actually respect Unix file acls?

After researching the subject on the internet I drew a conclusion that Samba should take into account Unix file acls. During my tests I found the opposite. Only Unix file mode bits are respected, and ...
0
votes
0answers
19 views

Samba4 does not map computer accounts correctly

I am having a problem with a fileserver running FreeBSD 10.1 and Samba 4.1.13. I have a share definition created thusly: [database] path = /tank/shares/database writable ...
1
vote
1answer
32 views

Transfer speed while copying from Windows to Pi

I am using a raspberry pi with samba as remotely accessible storage in my local network. While copying files from windows to pi I am getting strange transfer speed. It jumps from 200 kB/s and less to ...
0
votes
0answers
10 views

Linux Mint will not allow traffic from one specific PC on LAN

I was editing /etc/network/interfaces, and then decided to change my settings over VNC instead. This halted my SSH session and also my VNC. I'm not sure if this locked me out or not, but I set cron up ...
0
votes
1answer
16 views

How to debug cups and samba? LaserJet Professional P1102w not printing “filter failed”

Here is what I have tried to verify: smbtree: WORKGROUP2 \\DAN-PC \\DAN-PC\Users \\DAN-PC\print$ Printer Drivers \\DAN-PC\IPC$ ...
0
votes
0answers
30 views

Stopping Samba Auto-reload on boot

Trying to boot my Linux 17 mint. It stops at "Stopping Samba Auto-reload integration." It hangs there and will not boot. I've tried recovery boot however the dpkg manager in the recovery isn't ...
2
votes
1answer
29 views

Different write behavior for owner and member of group despite 775 permissions

I have mounted a remote share via my fstab using the line: //path/to/target /media/f cifs gid=<mygroup's id>,dir_mode=0775,file_mode=0775 0 0 As a result, everything under /media/f winds up ...
1
vote
0answers
35 views

Samba Password must change after first logon

How to enable "samba password must change after first/next logon"? I enabled a function in pdbedit file but is not working. root#/opt/samba/bin/pdbedit -P "user must logon to change password" ...
1
vote
0answers
18 views

Is there a reason I can't mount with a prefixpath in this scenario?

I'm not sure why this scenario is so weird, but I have a particular combination where this command won't work: mount -o username=guest //192.168.1.70/Volume_1/Movies/Library /storage/movies I get ...
2
votes
0answers
35 views

What's the correct way to share a directory with Windows machines using Samba?

I'm running Debian 7.7, intended to be used as a server. I've got Apache installed and I'd like to share its /var/www directory and access it from Windows machines. I've followed the instructions on ...
0
votes
0answers
54 views

Optimal mount options for Windows Server 2012 R2

1. Linux Side What mount.cifs options should I use to mount a Windows Server 2012 R2 Share in Linux (via fstab)? E.g., what about the optimal values for vers, sec, iocharset, etc? Should I use ...
2
votes
2answers
44 views

No EOF, when a program reads its own executable file on cifs mount

My java-based installer couldn't copy itself to target dir eating all disk space and I thought it was a java bug, but then I reproduced it with plain dd. When I try to read my own executable using a ...
0
votes
0answers
57 views

How do I set up a secure Samba share on CentOS 7?

I want to set up secured Samba shares so I can connect different users on the same computer to their own separate shares. I'll use a script to discover the user's credentials then run mount -t cifs ...
1
vote
0answers
29 views

Utilizing Samba Shares Without using Winbind

I am curious if it is possible to use samba shares without using winbind. In our current environment we are using SSSD, Kerberos, and Samba to complete the required tasks such as joining the windows ...
0
votes
0answers
92 views

Samba 4 has high CPU usage when accessing mapped drive through Windows

I have noticed that when I access my Samba share from Windows, the smbd daemon will always use aprox 10-20% CPU - no matter if the share is used or not from Windows. Even if I close the share/window, ...
0
votes
0answers
29 views

Permissions doesn't change while mounting windows directories (mount.cifs)

I used this command: mount.cifs //192.168.1.106/ukv_sftp$ /home/admin/public_html/remote -o credentials=/root/.smbcredentials, uid=500, gid=500 but permissions set only for root user, uid=500 and ...
0
votes
2answers
38 views

How to upload a file to a shared drive using unix?

I have a requirement which says it should be able to upload and download a file from a Windows shared drive using UNIX. How to approach that ? Should it be done using ftp or sftp ? Please explain.
2
votes
0answers
36 views

Login to Linux using a trusted Active Directory

I'm having trouble to log in to Linux using a trusted Active Directory. The machine is connected to an Active Directory that we are responsible for in the project, but most of the users who will use ...
2
votes
0answers
33 views

Automount Samba directory as /home/$user

I'm working with a group, trying to set up persistent data on several thin clients for our Linux lab. For security and maintenance reasons, we want to be able to flash a clean snapshot of Arch Linux ...
4
votes
1answer
94 views

Fedora 20: Users cannot enter their home directory

Running Fedora 20 on a file server and ran into this strange issue, not sure what I'm doing wrong. The account I made while installing the OS works fine, but every other account I made has this ...
1
vote
0answers
69 views

LDAP: Local and remote user with same username

I have configured an openLDAP server with LDAP user and group ids beginning at 10000. My client successfully binds to the LDAP server via ldapsearch. Additionally, getent passwd|group returns a full ...
0
votes
0answers
17 views

Add multiple workgroups in Samba

I am using RHEL 6.5 and I have integrated this server with Active Directory using this guide. As of now, I have configured only one domain in /etc/samba/smb.conf, so that only the users belonging to ...
1
vote
1answer
38 views

What do these 'smbclient' samba information mean?

On a gentoo Linux I am making a call to smbclient, which among others show the following output when it is connecting to a Windows share on a Windows machine: Domain=[LN_DOMAIN] OS=[Unix] ...
2
votes
0answers
197 views

Shared folder between QEMU Windows guest and Linux host

In the past I have used Virtual Box which has very good support for sharing a folder on the host with a Windows guest. I am looking for similar functionality for QEMU. The documentation suggests to ...
0
votes
1answer
63 views

How to process samba full_audit logs in to logstash

I have been working on taking my samba vfs full_audit logs and processing them with grok and moving them on to an ELK stack. I have added the following to my global samba conf: full_audit:prefix ...
0
votes
0answers
24 views

Why does 'select' sometimes hangs in a 'smbclient' call?

On a gentoo Linux system I am doing the following smbclient call: /usr/bin/smbclient "//10.0.0.10\volume" "admin" -U "xxxx" -W "WORKGROUP" -D "files" -c "ls" which in most cases works fine and ...
1
vote
2answers
69 views

How to set default group for files created in Samba share

I'm sharing a directory, /home/pi/pydev on a debian box (raspberry pi, in fact) with Samba. I'm reading from and writing to that directory from a Windows 7 machine. When I create, under W7, a file in ...
0
votes
1answer
214 views

Unable to access SAMBA Share From Windows [closed]

Hi This is a repeat of this question on Superuser. Since I didn't get any answers there, I've posted the question here hoping to get more answers since this is more Linux & Unix specific. Hi ...
2
votes
1answer
74 views

How do I mount a Windows folder on Linux (with Samba) and see the correct permissions?

I have a Windows 7 box and a Linux machine. I can correctly access the files on the Windows machine from the Linux machine. however, when I look at the permissions from Linux and from Cygwin on my ...
3
votes
4answers
466 views

Transfer files between Windows and Linux machines?

My problem is that I need to backup the files on my Linux machine to my Windows laptop. My external hard drive died, and so backing up to an external drive is out of the question for the time being. ...
0
votes
0answers
224 views

failure joining samba AD domain over a slow connection: NT_STATUS_IO_TIMEOUT

Running Ubuntu with Samba 4 (Zentyal 3.5) Trying to join a new ADC (additional domain controller) to an existing PDC. Unfortunately I am getting an error, and I THINK the error might be caused by ...
1
vote
1answer
23 views

Default Shell for Samba Machine Accounts

Using Samba, as a domain controller, I need to add Windows machines as users (in /etc/passwd), and to the Samba database as a machine. In the /etc/passwd file, I noticed about half the machines have a ...
2
votes
0answers
43 views

what is the command to synchronize samba4 ADC -> PDC

I have another question on here that is almost exactly the same, but it had a lot more details and kind of went off track (and I never got my answer). So I'm trying again. I know that this command ...
1
vote
2answers
44 views

Graphical view of files on server

I work at a university, and I have a personal webpage. This is located in my home directory, under public_html. I want to start editing this webpage from Linux. Under Windows, I used to map to this ...
20
votes
4answers
598 views

Linux solution for schools?

The school I'm working for as an administrator requested a system upgrade. Currently we are using a government-suggested Linux distribution called SuliXerver - it would be great, but most of the admin ...
2
votes
1answer
446 views

Commands for successful domain controller replication on Ubuntu / Samba4 / Zentyal

I have a Primary Domain Controller (PDC) and an Additional Domain Controller (ADC) running on two different machines at two different locations connected via a VPN. Both are running a version of ...
1
vote
1answer
105 views

“You do not have the permissions necessary to view the contents of “Share on name.domain.com”.”

I am having some issues with Samba on my Fedora file share server. I've logged into as the vncuser below on the server itself and I can access the directory, however I get permission denied errors ...
1
vote
1answer
56 views

Create FQDN in LAN for Windows systems without samba

I just set up my raspberry pi. It is working great and I can easily access it from my local Windows machine using SSH. I gave it a custom hostname. I can acces the pi with this hostname only when the ...
0
votes
0answers
50 views

Samba sharing Mounted USB Drive

So I have a samba server, and I am able to connect to my shared directory under the home dir. But when I setup another share called "External" and map it to path = /media/External windows will ...
0
votes
2answers
149 views

How can I use virtual users in “write list” and “read list” in samba?

Suppose I don't want to create effective users/group for my users (samba server as share server), and I need to create a share for them. Question : How can I use write list, read list, valid user ...
0
votes
1answer
88 views

Samba share open for all to all

thanks for viewing at this question. I have a CentOS 6.5 server with a share that is and should be accessable for and from everyone. All content placed on that share should be accessable by everyone. ...
2
votes
1answer
21 views

Printing through a Samba server without recording the password in plaintext

I need to access a printer through a Samba server. In CUPS, I could make it work by entering a device location such as smb://username:password@hostname/printer_name. However, it would mean for my ...
0
votes
0answers
226 views

Version Error Integrating PowerBroker Identity Services and Samba on ubuntu

I am trying to use PBIS (formally likewise open) to enable me to limit permissions on shares to certain AD groups. When I run the command samba-interop-install --install I get the following error ...
1
vote
1answer
110 views

How can I write to my Samba share?

There are a million versions of this exact question out in google land but I've been unable to solve my problem (sorry). I have created a Samba share on Ubuntu 14.04 (actually xbmcbuntu) that I can ...
0
votes
1answer
552 views

What does `process_usershare_file` do?

I have a samba server that is giving me this in logs for every single share (in this case "Public" is the share): Sep 2 07:49:42 MyServer smbd[31606]: [2014/09/02 07:49:42.398065, 0] ...
4
votes
1answer
152 views

How do I share a mounted sftp drive?

My friend has a public server that he's given me read access to with SFTP. I've successully mounted it in Mint 17 with the command sshfs user-name@file-server:/location/I/want /mount/point/I/want -o ...
1
vote
3answers
1k views

Samba: mount error: could not resolve address for XXX: Unknown error

I've read several guides on mounting samba shares, but no luck yet. I'm able to "login" to my samba share with the following command: smbclient //vvlaptop/Documents It asks for password, but there ...
2
votes
2answers
532 views

Print job “Held for authentication”

Following the instructions here, I have installed a Samba print server on an ARM-based Udoo-quad running Udoobuntu 12.04 LTS. The Samba server is working, and (after setting guest ok = yes in the ...
1
vote
0answers
542 views

Samba prompts for a password twice

I have a relatively new samba install configured to give Windows users access to some log files on a syslog server ("littleEngineer"). However it's prompting for a password to just get a share listing ...
1
vote
1answer
55 views

Samba permissions don't apply

All groups exist and the users are in their belonging defined group. [homes] comment = Home Directories admin users = @admin browseable = no read only = no create mask = 0750 (Users can't write in ...