Routing (in IP-based networks) is the process of selecting paths in a network along which to send network traffic.

learn more… | top users | synonyms

1
vote
0answers
260 views

Linux routing table entry disappears

I run Fedora 20 (3.13.10-200.fc20.i686) inside VirtualBox on a Windows 7 SP1 host. The Ethernet adapter on the guest is configured as a Bridged Adapter in VBox, and gets an IP via DHCP. Here's the ...
1
vote
1answer
2k views

Conntrack TCP Timeout for state stablished not working

Im using a private IP address and I want to keep alive SNAT entries in my Router (Gateway) for at least two hours (some windows apps of my network are using TCP keepalive set to 2 hours). Gateway is a ...
0
votes
0answers
29 views

How to use networks default gateway dynamically? [duplicate]

I want to use specific interface for specific use from different different application. I am using Ethernet, Wi-Fi and 3G modem interfaces in my embedded Linux set-up. Now my set-up is up with ...
7
votes
1answer
764 views

Linux routing for receiving packet

Maybe this is a dumb question. I have two NIC and they are in the same subnet. ip route commnad show above. Kernel was build WITHOUT policy routing. My question is: When receiving packet whether ...
0
votes
1answer
2k views

ICMP gives host an impossible redirect

I am having trouble with forwarding on a system which hosts a few headless VirtualBox VMs. I have not changed anything but the configuration has stopped working. The VMs have IP addresses on their own ...
2
votes
1answer
3k views

mutliple default gateways for alias interfaces (SOLVED)

Alias interfaces defined in /etc/network/interfaces cannot have multiple default gateways. Unfortunately I would like to use the same interface to access 2 differents nets, and I need to define 2 ...
0
votes
1answer
42 views

Adding a route with time-limited validity?

I have read different routing protocols, each one adds routes with limited time validity to routing table. Is there a method in Linux/Ubuntu, without installing any routing daemon, to add a time ...
0
votes
4answers
158 views

Linux routing tables

I'm trying to learn Linux routing tables and ran into bit of snag. In the example below I'm not sure what is happening. My understanding is 0.0.0.0 means that for line 1 and 2 any packets outside of ...
2
votes
2answers
255 views

Different sites on different interfaces using link aggregation

I read about Ubuntu Bonding and how it allows to bond multiple connections to get several advantages. My requirements is this : I want two different interfaces at a time (A wifi and other Ethernet) ...
3
votes
1answer
2k views

What is the interface scope (global vs. link) used for?

Routing table entries have an attribute scope. I would like to know how the change from global to link (or the other way round) affects the network system.
1
vote
1answer
116 views

How to use one nic for storage traffic & other for network traffic in Linux(Slackware)?

Problem I have a Linux machine (Slackware) with two network interface cards and i want to use one interface for network traffic and other for storage traffic . As this is Slackware i dont know this ...
0
votes
1answer
204 views

Why won't my computer connect to my Linux access point?

I'm setting up a Raspberry Pi as a proxy access point which accesses the internet via my USB tethered smartphone and is connected to my Windows PC via Ethernet. The internet works fine on the Pi, but ...
4
votes
1answer
615 views

Why is this static route not taking effect?

Original Question I am running Ubuntu and network manager. I have two different interfaces, eth0 and eth1. Network manager has (as far as I can tell) correctly added this manual route: ~$ ip route ...
1
vote
1answer
169 views

tcp/ip - trigger action or event after period of no network activity on certain port(s)

Is it possible, perhaps using iptables or one of the wrappers/frontends to iptables, to trigger an action or run a script after a certain period of time has elapsed with no network activity on a ...
4
votes
2answers
373 views

Send traffic to self over physical network on Ubuntu

I have a dual port ethernet NIC and let's say I have connected both ports in a loop and assigned the following IPs to the 2 ethernet interfaces: eth2 -> 192.168.2.1 eth3 -> 192.168.3.1 I want to ...
0
votes
3answers
126 views

iptables rules - input and output

I'm new with Linux and iptables. I have a Ubuntu Server distro (12.04) on a PC which has 2 network interfaces (eth0 and eth1). I also have 2 laptops, one is plugged to eth0 and the other to eth1. ...
1
vote
0answers
607 views

How to redirect tun SSL VPN through HTTP CONNECT proxy, using iptables?

I use a VPN under SSL solution (Firepass) on Android. VPN opens an SSL connection on port 443 of remote VPN server. My mobile carrier doesn't allow direct connections on port 443 but allow SSL ...
1
vote
1answer
208 views

High performance routing with high churn ruleset. What approach is most likely to scale to C10K and beyond?

I've been asked to create a high throughput router using PC / server hardware. I'm modestly familiar with pf, iptables, and tc, but I've never had such high churn and so many rules. I hope you can ...
0
votes
1answer
670 views

solaris netstat -rn output clarification

We have couple of servers performing the same function. On some I see following output: Routing Table: IPv4 Destination Gateway Flags Ref Use Interface ...
3
votes
1answer
238 views

Linux: How to auto-configure IP routing based upon ping results

I've got a linux server with two possible connections to the net: one is a slow, high-latency cellular modem (ppp0), and the other is through fast wifi->broadband (wlan0). The problem is that the ...
2
votes
1answer
293 views

Compiling Linux kernel for a router [closed]

I want to make an installable linux kernel that has routing enabled already. So anyone can install it on their machine, do some configuration as required, and machine will work fine for their routing ...
0
votes
1answer
125 views

Testing a Linux router on Laptop with one NIC [closed]

So, I have these instructions on converting my Linux machine to a router using (enable IP forwarding, NAT). Now my laptop has only one NIC and I want to test this setup. Any ideas how I can do this? ...
0
votes
1answer
56 views

How to route “single ip” to different interfaces [duplicate]

i have a dd-wrt router (ip 192.168.1.1) with the following network interfaces: eth0 ath0 ppp0 (a pptp vpn client) i would like to route all traffic from ip 192.168.1.10 to 192.168.1.20 through ...
3
votes
1answer
126 views

How does Linux handle 2 identical destinations in its routing table?

I have this is my routing table (in that order): 10.3.68.0/22 via 172.16.100.9 dev vlan4 10.3.68.0/22 dev eth3 proto kernel scope link src 10.3.69.254 eth3 has ip 10.3.69.254/22. Why does ...
0
votes
1answer
132 views

DNS not resolving using IP rule for dialup modem

I am running Ubuntu 12.04. I have a HSDPA USB Modem, with which I can successfully dial in. It works fine as well when I set the default gateway (remote IP address) in the main routing table. But I ...
1
vote
1answer
846 views

Route HTTP traffic thorugh different interface

I have my normal eth0 interface and an setup ppp0 interface, the problem I have is that I want to exclusively route all HTTP/HTTPS traffic through the ppp0 interface and everything else through the ...
0
votes
0answers
327 views

On ssh connection the auth.log shows as source IP the external IP of the server instead of the IP of the client

I have a very odd situation with my ssh connection. Every time I connect to my server, whatever is my external ip, the connection have as source the server's external ip. Example Server S.O.: ...
2
votes
1answer
491 views

How do I prevent my hostapd access point from pretending to route to the Internet?

I have a nice little iMX6 (an ARM CPU) board running Linux kernel 3.0.35 with hostapd 0.7.3. Setting up the wireless interface as an access point works fine but clients think they can be routed ...
0
votes
0answers
27 views

Routing Application through different network interfaces [duplicate]

I have two interfaces on a server, let's call them eth0 and eth1. The underlying server is running CentOS 6.5 I would like to be able for some application to use eht0 while some others use eth1. ...
2
votes
0answers
3k views

Understand the Route table

I just setup the OpenVPN and it is working as expected. However, the routing table of the client is confusing me to no end. Here is the route table: # route -n Kernel IP routing table Destination ...
1
vote
0answers
54 views

Different routing for each address on an interface

I know I can add several IP addresses to an interface without using interface aliases (ex.: eth0:0). My question: but how can I create different routing decisions for the different IP addresses on ...
2
votes
1answer
517 views

iptables Port Forwarding — no service with the port

I have setup a network as in the image below: Firewall (FW) running CentOS 6 has two physical interfaces with subinterfaces: eth0:2 — 10.100.1.78/25 eth0:3 — 10.100.1.79/25 eth3 — 192.168.0.21/24 ...
1
vote
0answers
710 views

OpenWRT configuration when router is in bridged mode

I am planning on putting my Zyxel ADSL modem in bridged mode and use an OpenWRT router instead as the exit point from my local network. So, what protocol must have the Wan interface if the router is ...
1
vote
0answers
108 views

Linux Source Routing with one gateway

I've a Linux box which have IP 10.1.1.100/24 on eth0 with gateway 10.1.1.1 and as well as 20.1.1.1 on eth0:1 and 20.1.1.2 on eth0:2 . Is there any way that I could communicate to a remote machine ...
3
votes
1answer
686 views

Creating a private network for internal VMs

I am trying to configure a private network for use with my Xen VMs, in addition to the public network in use by another of the VMs (VM1, which has its own public IP). So far, I have the public side ...
2
votes
1answer
1k views

Transparent Ethernet over GRE not forwarding traffic

I am running on Linux 2.6.30.9 and have been trying to setup a transparent ethernet over GRE tunnel. The network topology used is as follows: I want to bridge PC1 and PC2 using Transparent Ethernet ...
1
vote
0answers
72 views

invisible bridged router with 2 route table

my setup I have 2 ISP connexion : ADSL and SDSL. A qos (named qos, ip : 192.9.201.252) server stands before the ADSL router. It is the only way to access the ADSL gateway (192.9.201.254) through a ...
1
vote
0answers
55 views

How to send packets coming from a second router on a particular port back to the router, using iptables not a route

I have a Linux server which runs a particular service listening on a single TCP port. The Linux server connects to the internet using a PPP connection and also acts as router for a local network using ...
2
votes
0answers
20 views

Route socks proxy traffic through wireless client [duplicate]

I have a router with two Internet WANs: DSL (vlan1) and wireless client (eth1). They are both in default route: vlan is the first and eth1 is the second (I am using ip route add default scope global ...
0
votes
0answers
862 views

Use iptable do redirect all the HTTP traffic to localhost

I use a Linux machine as WLAN Router with the help of hostapd and udhcpd. There's also an Apache web server installed on the same machine. Now I want to redirect all the traffic which comes through ...
3
votes
1answer
2k views

Internet routing between wlan0 and ppp0?

On my Debian Linux device, I have a USB-modem that is connected to the Internet. Its interface name is ppp0. I also have a USB-wireless adapter, where I am hosting a Access Point. Its interface name ...
1
vote
0answers
979 views

Route outgoing traffic to different gateway based on port

I am trying to get around my Usenet download bandwidth restrictions based on IP. I currently have two IPs from my ISP to double the download speed. So far I have it working and getting double speed ...
0
votes
1answer
174 views

How to automate route commands

For some reason everytime I connect to my VM I have to manually launch these two commands for it to connect to the Internet. route add 198.245.49.254 dev eth0 route add default gw 198.245.49.254 Is ...
2
votes
0answers
56 views

How to route traffic to different interfaces for different ports [duplicate]

I have an eth0 connection providing internet connection through a proxy server only for port 80 and 443 (provided by university). For ssh, git and related purposes, I got a different connection on my ...
6
votes
1answer
1k views

What do I need to add a virtual IPsec adapter?

I'm trying to set up an IPsec connection manually from the console with iproute2. What I need is a virtual interface (at best, a virtual IP address could also be sufficient) that IPsec-transforms ...
4
votes
1answer
982 views

How to open VPN connection inside other VPN connection under Linux/Ubuntu

Is it possible to have two VPN connections on top of each other under Ubuntu? Scenario: My organization is quite large and has its own large network. Each group inside the organization has its own ...
4
votes
1answer
123 views

putting extra hops into traceroute6 on OpenBSD

I'm running OpenBSD, or maybe FreeBSD. I don't have lots of IPv4 addresses to waste, but who doesn't have a few billion of IPv6 ones? How do I add some extra IPv6 hops to a traceroute6, around pf(4) ...
3
votes
1answer
166 views

complex dd-wrt routing setup - is it possible?

I have access to my university's VPN through OpenVPN, and would like to extend it to all the devices at home. I have cable internet, a DD-WRT router, a bunch of clients (mostly Windows), and a ...
0
votes
1answer
62 views

Ip connectivity with two interfcaes

I have two network interfaces in Linux machine , eth0 and eth1. IP is assigned to both interface from two different VLANs and default gateway to eth0. Now if interface eth0 is down I am unable to ...
3
votes
1answer
173 views

Local DNS Server Refuses to Ask itself for DNS

I am running Debian 7 and have set up a DHCP and DNS server. Everything is working nicely, except for the server itself not following the DNS entries in BIND. The problem is that /etc/resolv.conf is ...