Red Hat Enterprise Linux (RHEL) is a commercially supported Linux distribution.

learn more… | top users | synonyms (1)

1
vote
2answers
700 views

Installation of Pacemaker Corosync on RHEL Server 6.6

I was trying to install Corosync and Cman using yum install -y pacemaker cman pcs ccs resource-agents This works fine on CentOS 6.3. Tried the same on Redhat Enterprise Linux Server 6.6 and ran ...
1
vote
0answers
99 views

Utilizing Samba Shares Without using Winbind

I am curious if it is possible to use samba shares without using winbind. In our current environment we are using SSSD, Kerberos, and Samba to complete the required tasks such as joining the windows ...
1
vote
1answer
176 views

remote connect to RHEL with X server from Windows

I have remote RHEL 7 server. I have Windows laptop. I want to connect to RHEL with UI (X Server). (So far I only have ssh connection using Putty.) What tool should I use?
1
vote
2answers
352 views

Unable to create partiton when installing RHEL 5.8

I am trying to install RHEL 5.8 on my IBM server. When I try to create a partition manually, I get the following error message. Your boot partition is on a disk using the GPT partition. How can I ...
1
vote
1answer
145 views

File of Doom freezes any computer that attempts interaction

I have a file on an internal server that causes any machine that interacts with it to immediately and irrecoverably freeze. By interaction, I mean just about anything: rm, mv, cp, cat, vi, gedit, ...
1
vote
0answers
74 views

Generating Email alert for events in system log

How to generate email alert for every critical event logged in system log /var/log/messages. Suppose, for the following log message, I want an email alert to be generated. Oct 24 11:17:42 eforms ...
1
vote
0answers
297 views

Using autofs to mount a NFS share

I am trying to setup a RHEL 7 machine with an autofs NFS mount (the NFS mount is a Windows 2012 R2 server running Services for NFS). Here are the contents of /etc/auto.master: /nfs /etc/auto.nfs ...
1
vote
1answer
438 views

RHEL 7 - how to configure teaming on internet-less server?

I'm preparing to install RHEL 7 on my server. I read in doc that The networking teaming daemon, teamd, is not installed by default. To install teamd, issue the following command as root: yum install ...
1
vote
0answers
214 views

RHEL 6.1 yum hangs on “Updating Red Hat repositories.”

I just registered my RHEL 6.1 system using rhn_register. However, when I try to run any "yum" command, it gets stuck on "Updating Red Hat repositories" and never does anything. BTW I can run this ...
1
vote
0answers
119 views

How are network and SCSI kernel modules handled differently from other kernel modules?

I used modprobe to load the 8021q.ko module on a server. I expected to have to do this every time the server rebooted until I made it persistent. However, to my surprise, it was loaded automatically ...
1
vote
1answer
59 views

Kickstart using only SAN disks

How would a kickstart file look like (using RHEL or a RHEL derivative), or is it even possible with it when we have zero local disks, and we only have disks from SAN? (Kickstart method is needed ...
1
vote
2answers
1k views

How to uninstall vmware-tools-foundation

So I am having lots of problems with this: Warning: RPMDB altered outside of yum. ** Found 21 pre-existing rpmdb problem(s), 'yum check' output follows: ...
1
vote
0answers
271 views

Yum or Reposync: How can I slowly remove a repository without unintended dependency issues?

I have used reposync to create and maintain local copies of two repositories, remi and remi-test. These are repositories maintained by Remi Collet. On several systems in an internal LAN, I added both ...
1
vote
1answer
667 views

Should reposync download repodata?

I am using reposync on an RHN repo. It downloads the RPMs just fine, but doesn't download repodata. I know I can run createrepo, but I'd like to keep group install info. Is this normal behavior? ...
1
vote
0answers
148 views

Get KERN_DEBUG messages into syslog on rhel7/centos7?

I've been trying to get KERN_DEBUG messages logged to a file in centos7, but have had no luck. I can get them just fine from "dmesg," but not /var/log/messages or /var/log/dmesg Here's a MWE kernel ...
1
vote
0answers
120 views

MongoDB “service” on clean Redhat can not be started

I just bring up Redhat 6.5 64-bit from AWS and did the below things: Disabled SELinux Disabled Iptables All ports opened in Security Group Rebooted Then i just followed, both of the below ...
1
vote
1answer
454 views

Kernel logs on power failure

I was wondering if it was possible to have a logging program document a random power failure. Clearly it won't have any time to log when the power fails, but is there a way to recognize a power ...
1
vote
0answers
74 views

Kexec immediately after Kickstart install (where is cmdline?)

I used to be able to kexec into a new kernel immediately after a kickstart (anaconda) install via pxe. I was able to do this by figuring out the current kernel version, and grabbing cmdline options ...
1
vote
0answers
261 views

How to configure a “point-to-point” connection with RedHat 6.5?

My servers are hosted at Hetzner and I need to create a point-to-point connection to my gateway. The server can only reach its gateway (and its locally configured) IP addresses directly. All other ...
1
vote
0answers
342 views

External VGA monitor port not working on HP Elitebook 2540p running RHEL 6.5

I'm running RHEL 6.5 on an HP EliteBook 2540p. When I connect the external VGA port to a projector or external monitor and press Fn+F3 to switch to the external port, nothing happens. Under System ...
1
vote
0answers
166 views

Installation from USB fails

I have a pretty old Ubuntu 8.04 machine. The machine doesn't have a DVD reader/writer in it. Challenge: Now, the challenge I am facing is to install RHEL6 in this machine. Obstacle 1: I needed to ...
1
vote
0answers
3k views

Error: iptables: No chain/target/match by that name

I am trying to configure proxy server on RHEL Server 6.5 using Squid and iptables. Below is the command I executed and the error message it displayed: vzlptest01 root [root] > iptables -A INPUT -i ...
1
vote
1answer
1k views

Trouble installing lxml with custom install location for libxml2/libxslt

I am attempting to install a python module called lxml to my account on a supercomputer running RHEL. I do NOT have root access or super user status. lxml requires the dev/devel versions of libxml2 ...
1
vote
1answer
88 views

Kickstart file not being found in VituralBox

I am installing a STIG RHEL on a virtual box and therefore have a custom kick start file in the iso I am using. The iso structure looks like this for the kickstart file ROOT | |----stig_fix ...
1
vote
1answer
134 views

Globbing with * in Bash - Debian vs RHEL [closed]

Where is the difference? Do these distributions handle globbing differently? Platforms: Debian Wheezy 7, Red Hat Enterprise Linux 7. Bash is always used. In my example, cat prints every file in /etc ...
1
vote
0answers
747 views

How do I set my samba share to allow guest users to view all folders and sub folders, including new and old

I currently have a samba share set up on RHEL, that allows any user to write to the root folder. I'm unable to write to the sub folders/files. I have run: chcon -R -t samba_share_t ...
1
vote
1answer
500 views

RHEL 6.5 won't boot after loading APF firewall

We have an RHEL 6.5 system which boots to the point of loading APF firewall and then just hangs indefinitely. The console shows the following: ... Loading autofs4: [OK] Starting automount: [OK] ...
1
vote
0answers
34 views

Can a RHEL 6.4 DS sync with a CentOS 5.4 DS

I have two CentOS 5.4 Directory Servers that sync information on a daily bases. I'm wanting to replace them with two RHEL 6.4 Directory Servers. Before the existing two are decommissioned all four ...
1
vote
0answers
87 views

Why does vpnc not block the LAN interface?

VPNC allows local LAN access in spite of activating the vpnc on my RedHat Linux machine When we want to activate the Cisco VPN on win machine, once VPN is active then the LAN port isn’t accessible ...
1
vote
0answers
37 views

(nologin) root and id X re-spawning

Today I faced a strange issue on one of the test server. Server was set to Runlevel 5. But it didnt work and system changed to runlevel 3. It was showing "init: Id "x" respawning too fast: disabled ...
1
vote
2answers
102 views

Do I compile Ubuntu Source code on Red Hat System?

If we install the Red Hat System then can we compile the other distros of linux on the Red Hat server system? If so, please provide me the tutorials and links.
1
vote
1answer
373 views

Language bar in RHEL 6

I'm having a problem with the language bar specifically in RHEL 6.5. I need the following: Language bar on the panel with either 2-letter code or a flag Switch languages with Caps Lock, optionally ...
1
vote
0answers
2k views

Packages skipped because of dependency problems:

2.6.32-71.el6.x86_64 RHEL 6 Please see at the end I am getting some issues due to dependency: [root@xilinx Downloads]# yum install --skip-broken glibc* Loaded plugins: refresh-packagekit, ...
1
vote
0answers
3k views

Kernel panic not syncing : Attempted to kill init

OEL 5.9 (Tikanga) 2.6.18-371.6.1.0.1.el5 On boot I get the following errors: ... exec of init (/sbin/init) failed!!!: No such file of directory Kernel panic - not syncing - Attempted to ...
1
vote
1answer
373 views

Installing Lispworks on rhel 6.5 Workstation. Error when loading application

Does anybody know what this error means and how to get Lispworks Personal edition to run on Redhat? Error: Error during GUI startup: Could not register handle for external module "-lgthread-2.0": ...
1
vote
1answer
143 views

how to make customized ISO?

I have made changes in RHEL starting from partition and also I have changed so many parameters. Now I want to use this changed OS as ISO image so that I can directly install it without doing all the ...
1
vote
0answers
170 views

How to disable PAE feature of kernel, after installation?

I am using RHEL 5.3(x86) as a base platform for my development purpose.My machine's spec is as follows: Intel, Core-i3 Processor @ 2.5GHz 4GB RAM Problem is whenever I am attempting to install the ...
1
vote
1answer
1k views

Do VmPeak & VmHWM have any measurement periods?

While reading kernel documentation I came across VmPeak & VmHWM, and it's a bit unclear to me. VmPeak in /proc/<pid>/status is described to be peak virtual memory size. Peak for what ...
1
vote
0answers
452 views

system boot appears in last but not in /var/log/messages

I am looking after a Red Hat Enterprise Linux 5.4 server. A user sent me a copy of the output from the last command and it shows multiple reboots on different days (there is no visible pattern to the ...
1
vote
2answers
2k views

How To Locate Dependencies Needed by RPM Packages

I am trying to deal with keeping our RHEL 5 server patched up, but also dealing with our security constraints. This particular server is not allowed to talk to the Internet. So yum isn't really an ...
1
vote
0answers
89 views

SNMPV3 traps are not being captured correctly

I have configured master agent (snmpd.conf/snmptrapd.conf) of SNMPv5.5 on RHEL6.3 server to support SNMPV3 traps, but when I try to generate a snmptrap and capture the trace through tcpdump, I still ...
1
vote
0answers
189 views

How to get back a lost session in RHEL : Using NoMachine

I logged in remotely to RHEL using NoMachine. Suddenly it got stuck and I have to close the NoMachine client. When I logged in again using NoMachine I can't see the old session (I can't see same ...
1
vote
0answers
224 views

Permanently enable scl for RHEL6 RedHat

RedHat provides a way to install packages with newer versions of packages than officially supported with Software Collections. After the installation of a software collection it is necessary to enable ...
1
vote
0answers
301 views

Service httpd is failing to start - fcgid can't create shared memory

I'm not sure why, but when I try to start the httpd service, it will not start. Server config: OS: CentOS 5.10 PHP: 5.5.7 Apache: 2.2.3 I built mod_fcgid from source, put it into the ...
1
vote
0answers
206 views

Listing previous logins through sftp

Hello people of the stackexchange, I am having a little difficulty trying to find a location of a particular log file which i'm hoping someone on here could help me with. What i am trying to do is ...
1
vote
1answer
38 views

Yum adds the dir 'Package' to baseurl

I'm on a network that doesn't get outside internet. I have the repo file pointing to a http server on the network that has the packages that came with the RHEL install cd. Most of the servers work ...
1
vote
0answers
45 views

Send big data with dsmigratedata command

I want send data to remote server using this command but I dont know what is the syntax is that I can use for this command... I'm using the command: $ dsmigratedate -s user@remoteip -p 22 password ...
1
vote
1answer
133 views

create multipath for local partition

Is it possible to create multipath to local partition? I got partition /dev/sda3 and I need /dev/mapper/mpath01 to be pointing to it. This is what I added in my kickstart (rhel 5.7) part ...
1
vote
0answers
234 views

How different is I/O handling of hard disk in AIX and Redhat Linux?

I am running a hadoop I/O workload in redhat linux and have ran that in IBM AIX as well with same underlying hardware, disk and disk configuration. With the default settings on the os redhat linux is ...
1
vote
1answer
188 views

Gibberish Characters in Redhat

On one RHEL Server I installed Arabic Language support but if browse some Arabic or Urdu Language sites it is showing gibberish characters. So I downloaded some fonts and copied them under ...