1
vote
0answers
19 views

Is it reliable to assemble md from two machines at the same time

Say we have the same disks accessible from two machines. I want to do assembling md from two machines. Is it possible/reliable ? The disks are connected through SAS. All I need to have is reliable ...
0
votes
0answers
22 views

Moved Raid from NAS box to PC running Ubuntu hdparm shows drives frozen

So I had a RAID5 setup in a Partriot S4 Javelin (a NAS box). I'm now migrating it to a proper server running Ubuntu 14.04. NOTE: There are 4 drives. All the drives show up in Ubuntu. Two show ...
0
votes
1answer
25 views

mixed raid types

I am about to reinitialise my (SW) raid array. Previously the array was raid5 with 4 disks. I've removed one disk in order to install a new additional (larger) drive. What I'd ideally like to do is ...
0
votes
1answer
33 views

How to get details of RAID devices both soft and hard?

I want to check if my server has RAID configured both soft and hard. I tried some commands on my server (Suse Enterprise Edition 11): **ms:~ # cat /proc/mdstat Personalities : unused devices: ...
2
votes
1answer
36 views

How do I know if software raid is running or setup correctly

This is what I pulled: mdadm --monitor --scan -f --pid-file=/var/run/mdadm/mdadm.pid cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sda1[0] sdb1[1] 262080 blocks super 1.0 [2/2] ...
0
votes
0answers
22 views

Ubuntu raid dirty degraded

I have Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (per /proc/version). There are two raid arrays ...
3
votes
1answer
121 views

Can't mount RAID after upgrade

I just upgraded my box to 14.04 and on bootup I got a message, that my RAID devices can't be mounted automatically so I chose to skip it and work through it after boot time. Now booted up, A mount -a ...
0
votes
2answers
92 views

Two arrays have slightly different array size with same size disks/partitions, why?

I created a software RAID 5 array one year ago using mdadm v3.2.x which shipped from CentOS 6.3, after few months, I moved/assembled the array to/in Fedora 19 (now Fedora 20). It had three 3TB disks ...
2
votes
1answer
721 views

How to setup a RAID system using USB sticks as storage media

I want to create an inexpensive self-hosted private git server with redundant storage. To that end I have bought a Raspberry Pi and configured both git and ssh on the Pi. I can access the Pi both from ...
3
votes
1answer
43 views

understanding the “chunk size” in context of RAID

Am I correct that chunk size in context of RAID is essentially the same thing as cluster in file-system context? In other words, chunk size is the smallest unit of data which can be written to a ...
2
votes
1answer
390 views

mdadm - RAID5 array size vs. actual disk size mismatch

I have 4x 3TB WD RED disks that are in mdadm RAID5, which should total an array size of 9TB usable space, however I only have 6TB. I have confirmed all disks are in the array, the only strange thing ...
2
votes
1answer
437 views

Mount an existing RAID 1 Logical Volume after OS upgrade

I just upgraded from Ubuntu 10.04 to Mint 16. The installer did not detect my existing RAID 1 array, and I can't access it anymore. My drives are: SDA - First RAID Disk SDB - Second RAID Disk SDC - ...
2
votes
2answers
870 views

Best way to create RAID on an existing system drive

I want to add another disk as RAID 1 to test my database performance. I am trying to not re-do the whole system, is it possible? Currently I have a single 1TB HDD with one 100GB system partition (and ...
2
votes
1answer
53 views

Linux installation in RAID

I am a fairly new systems administrator and I have to configure the RAID on a Linux machine. From my understanding so far, RAID is an array of multiple disks. I have some questions though. Question ...
3
votes
1answer
231 views

mdadm; previously working; after “failure”, cannot join array due to disk size

Abstract I had a functional Raid 5 array, I rebooted the box, and then mdadm couldn't re-assamble one part. Seeing that it was only one part, I thought it would be easy to just re-sync. But that ...
2
votes
2answers
263 views

Can I create a 2 TB RAID-1 array out of one 2 TB disk and two 1 TB disks while preserving 1 TB of data?

I currently have 1 TB of data on a RAID-1 mdadm array. This array consists of one 1 TB disk and a 1 TB partition on a 2 TB disk. I have now bought a second 1 TB disk, and I would like to use this to ...
4
votes
1answer
114 views

Reusing older raid discs

I have a software RAID5 array (Linux md) on 4 disks; the OS is OpenSUSE 12.3. Recently I replaced a disc with a larger one (fail disc, remove it, add new disc). The capacity of the array has not yet ...
1
vote
2answers
517 views

erased md0, md1 and can't recreate them

I previously had a working RAID 1 array. I think as a result of running grub-install /dev/sdb and grub-install /dev/sdc I somehow wiped my computer of md0 and md1. I need to set them up again. When ...
3
votes
1answer
2k views

No /etc/mdadm.conf in centos 6

I have installed centos 6 and setup a new RAID array with two disks. every thing is ok and I have partitioned the array but I don't see any /etc/mdadm.conf or /etc/mdadm/mdadm.conf files. I have ...
0
votes
1answer
199 views

Can I configure software RAID on an existing server without losing the existing partition?

I've got an existing server with 1 disk and Ubuntu 12.10 installed and running. I want to add a 2nd disk and configure RAID 0 across the two disks using Ubuntu's software RAID. Can I do this ...
1
vote
0answers
485 views

Installing 12.04LTS Server on a Fake RAID10

Scenario Install Ubuntu 12.04LTS Server on a RAID10 with boot on a RAID1. 4 - 2Tb SATA Hard Drives 3 Partitions (/boot, /, and swap) boot (256Mb from each disk) setup in RAID1 /dev/md0 partition ...
2
votes
0answers
328 views

Disable RAID auto detect at runtime

In Linux, I'm partitioning two disks for RAID1 with fdisk. The first disk partitioning succedes, but the second fail because the raid starts automatically and occupy also the second disk (why? it ...
1
vote
2answers
423 views

Can I mount a microsoft mirrored dynamic disk?

I'm testing out sw raid in windows 7, but I almost always use linux and I would like to know if it's possible to mount such a mirrored dynamic disk. I can already mount each members separatly but ...
3
votes
2answers
137 views

RAID Lag-Behind Burst Write

I would like to setup RAID1 so that a ramdisk in the RAID configuration has occasional synchronisation with a physical disk (that is very battery intensive to run, so I hope to let it spinout). Is ...
4
votes
1answer
1k views

RAID 10 can not be started

I have a RAID 10 array managed with mdadm which has failed . The symptom was that X has crashed and I was unable to logon from the terminal. I have restarted the computer and /dev/md1 did not start. ...
1
vote
2answers
596 views

Software raid + separate partitions?

I have setup software RAID1-arrays using two 250GB harddrives. There's two arrays - one named md0 in which the system is kept and the other, md1 works as swap: # cat /proc/mdstat md0 : active raid1 ...
1
vote
2answers
266 views

Copying linux install from non-RAID/x86 to RAID/x86-64

I'm copying an Ubuntu Server install from an x86 machine with a single hard disk to a new machine with x64 and two identical disks. Two partitions will span the new disks: One small-ish RAID1 for ...
6
votes
1answer
2k views

mdadm Raid5 gives spares missing events

I succesfully builded up a raid5 array on debian testing (Wheezy). As the manpages and further tell, the array would be created as an out of sync array with just a new spare injected to be repaired. ...
6
votes
2answers
1k views

Will the system make sure that mdadm is sync-ed before completing a reboot?

This is a follow up to my crazy mdadm problem. I'm trying to figure out what might have caused sda to get out of sync in the first place. The only thing I can think of is that I had just run a bunch ...
3
votes
1answer
1k views

installing grub 2 on mdadm, which device?

when installing grub(2) to mdadm devices are you supposed to install it to /dev/sdX or /dev/mdX?
2
votes
1answer
356 views

Drive was unable to assemble into the array

I ran mdadm -A /dev/md0 /dev/sda1 /dev/sdb1 Only /dev/sdb1 was loaded into the array though. I have a few more arrays on the same two drives too. Each time the partition on sda failed. dmesg told ...
7
votes
2answers
525 views

In place upgrade of a software raid 5 array

I run a software raid array for my backups, but my data has outgrown capacity. considering I have a full 2.4TB array with 5*600GB drives and also have 5*2TB drives I would like to swap in. What ...